Custom O-ring STL 3D file ID 30.5 × CS 3.6 mm 📦#1503
Generation date: 2025-09-01
3D model download
Free- o-ring-ID30.5mm-CS3.6mm_model1_model1503-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 30.5 mm (≃1 3/16 in) |
| #2 | cross section (CS) | 3.6 mm (≃0.14 in) |
| Metadata | Value |
|---|---|
| outer diameter (OD) | 37.7 mm (≃1.48 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O'ring STL 3D file ID 28.5 × CS 3.6 mm (📦 #3249)
1 object(s) - format STL
3D model of O-ring with Internal diameter 28.5 mm / CS (cross section) 3.6 mm. Outer diameter (OD, for outer diameter) is 35.7 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 28.5 | mm |
| cross section (CS) | 3.6 | mm |
O-ring STL 3D file ID 31 × CS 3.5 mm (📦 #1579)
1 object(s) - format STL
STL model of rubber ring with Internal diameter 31 mm × CS 3.5 mm. External diameter (OD) resulting corresponds to 38 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 31 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL file ID 31.7 × CS 3.5 mm (📦 #8243)
1 object(s) - format STL
3D model of rubber ring with dimensions Inner diameter (ID) 31.7 mm × CS (cross section) 3.5 mm. Final diameter resulting is therefore 38.7 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 31.7 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL file ID 28.5 × CS 3.5 mm (📦 #1581)
1 object(s) - format STL
STL file of rubber ring with dimensions ID (inner diameter) 28.5 mm by CS (cross section) 3.5 mm. Outer diameter (OD) resulting is 35.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 28.5 | mm |
| cross section (CS) | 3.5 | mm |
O'ring STL file ID 33 × CS 3.5 mm (📦 #8201)
1 object(s) - format STL
STL file of O-ring with ID (inner diameter) 33 mm by CS (cross section) 3.5 mm. The outer diameter is 40 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 33 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL file ID 34 × CS 3.6 mm (📦 #3234)
1 object(s) - format STL
3D file of circular seal with Internal diameter 34 mm / thickness 3.6 mm. Final diameter resulting is 41.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 34 | mm |
| cross section (CS) | 3.6 | mm |
O'ring STL file ID 36 × CS 3.6 mm (📦 #2227)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with ID 36 mm × CS (cross section) 3.6 mm. Final diameter corresponds to 43.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36 | mm |
| cross section (CS) | 3.6 | mm |
O'ring STL 3D file ID 36 × CS 3.5 mm (📦 #2203)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 36 mm / CS (cross section) 3.5 mm. Outer diameter (OD, for outer diameter) corresponds to 43 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 25 × CS 3.5 mm (📦 #8200)
1 object(s) - format STL (3.0/5) 1 vote(s)
3D model in STL format of rubber ring with dimensions Internal diameter 25 mm / thickness 3.5 mm. The outer diameter corresponds to 32 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 25 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL file ID 38 × CS 3.5 mm (📦 #4970)
1 object(s) - format STL
Model of sealing ring with Inner diameter (ID) 38 mm / section thickness 3.5 mm. Outer diameter (OD) resulting is 45 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 38 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL file ID 30 × CS 4 mm (📦 #1023)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 30 mm by CS (cross section) 4 mm. Final diameter is 38 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 30 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 32 × CS 4 mm (📦 #2202)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter 32 mm / CS (cross section) 4 mm. Outer diameter (OD) corresponds to 40 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 32 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 22 × CS 3.5 mm (📦 #8317)
1 object(s) - format STL
3D file in STL format of circular seal with dimensions Internal diameter (ID) 22 mm × section thickness 3.5 mm. Outer diameter (OD) resulting is therefore 29 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 22 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 27 × CS 4 mm (📦 #9216)
1 object(s) - format STL
3D model in STL format of sealing ring with ID (inner diameter) 27 mm / CS 4 mm. External diameter (OD) resulting is therefore 35 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 27 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 42 × CS 3.6 mm (📦 #2226)
1 object(s) - format STL
3D model of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 42 mm × CS (cross section) 3.6 mm. Outer diameter (OD, for outer diameter) resulting is therefore 49.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 42 | mm |
| cross section (CS) | 3.6 | mm |
O-ring STL 3D file ID 42 × CS 3.5 mm (📦 #2201)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 42 mm by CS (cross section) 3.5 mm. The outer diameter resulting corresponds to 49 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 42 | mm |
| cross section (CS) | 3.5 | mm |
O'ring STL file ID 21.8 × CS 4 mm (📦 #8090)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with Internal diameter 21.8 mm × thickness 4 mm. Final diameter resulting is 29.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 21.8 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 18.3 × CS 3.6 mm (📦 #4440)
1 object(s) - format STL
3D file in STL format of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 18.3 mm by CS 3.6 mm. The outer diameter resulting corresponds to 25.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 18.3 | mm |
| cross section (CS) | 3.6 | mm |
O-ring STL 3D file ID 30 × CS 3 mm (📦 #1047)
1 object(s) - format STL
STL model of circular seal with dimensions ID (inner diameter) 30 mm × section thickness 3 mm. The outer diameter is therefore 36 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 30 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 32.8 × CS 3 mm (📦 #3665)
1 object(s) - format STL (5.0/5) 1 vote(s)
3D model of rubber ring with Internal diameter (ID) 32.8 mm × CS 3 mm. The outer diameter resulting is 38.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 32.8 | mm |
| cross section (CS) | 3 | mm |
O'ring STL file ID 40 × CS 4 mm (📦 #1055)
1 object(s) - format STL
STL file of O-ring with dimensions ID (inner diameter) 40 mm / section thickness 4 mm. The outer diameter resulting is 48 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 40 | mm |
| cross section (CS) | 4 | mm |
O'ring STL file ID 33.8 × CS 3 mm (📦 #3664)
1 object(s) - format STL
3D model of O-ring (torus-shaped seal) with dimensions ID (inner diameter) 33.8 mm / CS 3 mm. External diameter (OD) is 39.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 33.8 | mm |
| cross section (CS) | 3 | mm |
O'ring STL file ID 27 × CS 3 mm (📦 #2782)
1 object(s) - format STL
3D file in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter 27 mm / section thickness 3 mm. External diameter (OD) resulting is 33 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 27 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 26 × CS 3 mm (📦 #1022)
1 object(s) - format STL
3D file of rubber ring with dimensions ID 26 mm × thickness 3 mm. The outer diameter resulting is therefore 32 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 26 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 35 × CS 3 mm (📦 #9914)
1 object(s) - format STL
Model of circular seal with Inner diameter 35 mm × CS (cross section) 3 mm. The outer diameter is 41 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 35 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 17.4 × CS 3.5 mm (📦 #3505)
1 object(s) - format STL
STL model of sealing ring with ID 17.4 mm / CS (cross section) 3.5 mm. The outer diameter is 24.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17.4 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL file ID 20 × CS 4 mm (📦 #3934)
1 object(s) - format STL
3D model of sealing ring with dimensions Internal diameter 20 mm / thickness 4 mm. External diameter (OD) resulting is therefore 28 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 20 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 25.3 × CS 3 mm (📦 #4759)
1 object(s) - format STL
STL model of rubber ring with ID 25.3 mm / section thickness 3 mm. Outer diameter (OD, for outer diameter) is 31.3 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 25.3 | mm |
| cross section (CS) | 3 | mm |