Custom O'ring STL 3D file ID 11 × CS 3.7 mm 📦#3120
Generation date: 2025-11-07
3D model download
Free- o-ring-ID11mm-CS3.7mm_model312_model3120-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 11 mm (≃7/16 in) |
| #2 | cross section (CS) | 3.7 mm (≃0.15 in) |
| Metadata | Value |
|---|---|
| outer diameter (OD) | 18.4 mm (≃0.72 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O-ring STL file ID 11 × CS 4 mm (📦 #3610)
1 object(s) - format STL
STL file of O-ring with dimensions Internal diameter 11 mm by section thickness 4 mm. Outer diameter (OD) resulting is 19 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 11 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 10 × CS 4 mm (📦 #3611)
1 object(s) - format STL
3D model in STL format of rubber ring with Inner diameter 10 mm by CS (cross section) 4 mm. Final diameter resulting is therefore 18 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 10 | mm |
| cross section (CS) | 4 | mm |
O'ring STL file ID 12 × CS 4 mm (📦 #3645)
1 object(s) - format STL
Model of sealing ring with dimensions Internal diameter (ID) 12 mm / CS 4 mm. Final diameter resulting corresponds to 20 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 9.4 × CS 4 mm (📦 #3117)
1 object(s) - format STL
3D file of sealing ring with ID 9.4 mm × CS 4 mm. Outer diameter (OD) resulting is 17.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 9.4 | mm |
| cross section (CS) | 4 | mm |
O'ring STL 3D file ID 13 × CS 4 mm (📦 #3149)
1 object(s) - format STL
File of rubber ring with Internal diameter (ID) 13 mm / thickness 4 mm. Outer diameter (OD, for outer diameter) resulting is 21 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 13 | mm |
| cross section (CS) | 4 | mm |
O'ring STL 3D file ID 7 × CS 4 mm (📦 #8659)
1 object(s) - format STL
STL file of O-ring with dimensions Internal diameter 7 mm by thickness 4 mm. Final diameter resulting is therefore 15 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 7 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 18.3 × CS 3.6 mm (📦 #4440)
1 object(s) - format STL
3D file in STL format of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 18.3 mm by CS 3.6 mm. The outer diameter resulting corresponds to 25.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 18.3 | mm |
| cross section (CS) | 3.6 | mm |
O-ring STL file ID 17.4 × CS 3.5 mm (📦 #3505)
1 object(s) - format STL
STL model of sealing ring with ID 17.4 mm / CS (cross section) 3.5 mm. The outer diameter is 24.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17.4 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 16.6 × CS 3.4 mm (📦 #8761)
1 object(s) - format STL
3D file in STL format of rubber ring with dimensions Inner diameter 16.6 mm / thickness 3.4 mm. The outer diameter corresponds to 23.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 16.6 | mm |
| cross section (CS) | 3.4 | mm |
O-ring STL 3D file ID 17 × CS 4 mm (📦 #1262)
1 object(s) - format STL
File of sealing ring with Internal diameter 17 mm by CS 4 mm. Outer diameter (OD, for outer diameter) resulting is therefore 25 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 8.8 × CS 4.2 mm (📦 #7885)
1 object(s) - format STL
File of O-ring (torus-shaped seal) with Internal diameter 8.8 mm / CS 4.2 mm. Final diameter is therefore 17.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 8.8 | mm |
| cross section (CS) | 4.2 | mm |
O-ring STL file ID 20 × CS 4 mm (📦 #3934)
1 object(s) - format STL
3D model of sealing ring with dimensions Internal diameter 20 mm / thickness 4 mm. External diameter (OD) resulting is therefore 28 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 20 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 6.3 × CS 4.2 mm (📦 #7887)
1 object(s) - format STL
3D model in STL format of rubber ring with Inner diameter (ID) 6.3 mm / section thickness 4.2 mm. Final diameter is therefore 14.7 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 6.3 | mm |
| cross section (CS) | 4.2 | mm |
O-ring STL 3D file ID 22 × CS 3.5 mm (📦 #8317)
1 object(s) - format STL
3D file in STL format of circular seal with dimensions Internal diameter (ID) 22 mm × section thickness 3.5 mm. Outer diameter (OD) resulting is therefore 29 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 22 | mm |
| cross section (CS) | 3.5 | mm |
O'ring STL file ID 21.8 × CS 4 mm (📦 #8090)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with Internal diameter 21.8 mm × thickness 4 mm. Final diameter resulting is 29.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 21.8 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 25 × CS 3.5 mm (📦 #8200)
1 object(s) - format STL (3.0/5) 1 vote(s)
3D model in STL format of rubber ring with dimensions Internal diameter 25 mm / thickness 3.5 mm. The outer diameter corresponds to 32 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 25 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL file ID 9 × CS 3 mm (📦 #2784)
1 object(s) - format STL
3D model of O-ring with dimensions Internal diameter 9 mm / thickness 3 mm. External diameter (OD) resulting is therefore 15 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 9 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 13 × CS 3 mm (📦 #1980)
1 object(s) - format STL
File of rubber ring with ID 13 mm by thickness 3 mm. Outer diameter (OD) resulting corresponds to 19 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 13 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 8 × CS 3 mm (📦 #8203)
1 object(s) - format STL
3D file in STL format of circular seal with Internal diameter (ID) 8 mm / CS 3 mm. Outer diameter (OD) corresponds to 14 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 8 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 6.5 × CS 3 mm (📦 #8389)
1 object(s) - format STL
STL model of sealing ring with dimensions Inner diameter (ID) 6.5 mm by CS 3 mm. The outer diameter corresponds to 12.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 6.5 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 16.4 × CS 3 mm (📦 #7321)
1 object(s) - format STL
3D file of rubber ring with dimensions Inner diameter 16.4 mm / thickness 3 mm. Outer diameter (OD) resulting is therefore 22.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 16.4 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 17 × CS 3 mm (📦 #3838)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with dimensions Inner diameter 17 mm by section thickness 3 mm. External diameter (OD) is 23 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 18 × CS 3 mm (📦 #8136)
1 object(s) - format STL
Model of circular seal with ID 18 mm / CS (cross section) 3 mm. Outer diameter (OD, for outer diameter) is 24 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 18 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 20 × CS 3 mm (📦 #3283)
1 object(s) - format STL
3D model of O-ring (torus-shaped seal) with Internal diameter 20 mm × CS 3 mm. Outer diameter (OD) resulting is 26 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 20 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 27 × CS 4 mm (📦 #9216)
1 object(s) - format STL
3D model in STL format of sealing ring with ID (inner diameter) 27 mm / CS 4 mm. External diameter (OD) resulting is therefore 35 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 27 | mm |
| cross section (CS) | 4 | mm |
O'ring STL 3D file ID 28.5 × CS 3.6 mm (📦 #3249)
1 object(s) - format STL
3D model of O-ring with Internal diameter 28.5 mm / CS (cross section) 3.6 mm. Outer diameter (OD, for outer diameter) is 35.7 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 28.5 | mm |
| cross section (CS) | 3.6 | mm |
O-ring STL file ID 28.5 × CS 3.5 mm (📦 #1581)
1 object(s) - format STL
STL file of rubber ring with dimensions ID (inner diameter) 28.5 mm by CS (cross section) 3.5 mm. Outer diameter (OD) resulting is 35.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 28.5 | mm |
| cross section (CS) | 3.5 | mm |
O'ring STL file ID 22 × CS 3 mm (📦 #8088)
1 object(s) - format STL
STL file of rubber ring with Internal diameter (ID) 22 mm / CS (cross section) 3 mm. Final diameter resulting is therefore 28 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 22 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 22.5 × CS 3 mm (📦 #5159)
1 object(s) - format STL
3D model of O-ring (torus-shaped seal) with dimensions Inner diameter 22.5 mm by CS (cross section) 3 mm. Outer diameter (OD) resulting is 28.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 22.5 | mm |
| cross section (CS) | 3 | mm |