?>

O-ring STL 3D file ID 13 × CS 3 mm 📦#1980

STL Download STL
Create a new model:
from scratch search for a model
File of rubber ring with ID 13 mm by thickness 3  mm. Outer diameter (OD) resulting corresponds to 19 mm.
Generation date: 2025-09-24
3D Model O-ring STL 3D file ID 13 × CS 3 mm

3D model download

Free
  • o-ring-ID13mm-CS3mm_model1980-_model1980-nb0_dd{id}.stl : 1.5 Mo
STL Mesh quality : not defined
No compliance warranty No compliance warranty
(no copyright - public domain)
Safe download

Values for this model

This model was generated by the O-ring template, with the following values:
Parameter Value
#1 inner diameter (ID) 13 mm
#2 cross section (CS) 3 mm
illustration of the parameters
Representation of the parameters

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 inner diameter (ID) ID
#2 cross section (CS) CS

Related 3D models

To search for a model based on your own parameters, go to the template page O-ring 

O-ring STL file ID 12.37 × CS 2.62 mm (📦 #1031)

1 object(s) - format STL (5.0/5) 2 vote(s)
O-ring STL file ID 12.37 × CS 2.62 mm
3D file in STL format of sealing ring with Inner diameter (ID) 12.37 mm × section thickness 2.62  mm. The outer diameter resulting is 17.61 mm.
Parameter Value Unit
inner diameter (ID) 12.37 mm
cross section (CS) 2.62 mm

O-ring STL 3D file ID 16 × CS 2.62 mm (📦 #1043)

1 object(s) - format STL
O-ring STL 3D file ID 16 × CS 2.62 mm
STL file of circular seal with ID (inner diameter) 16 mm / section thickness 2.62  mm. Final diameter corresponds to 21.24 mm.
Parameter Value Unit
inner diameter (ID) 16 mm
cross section (CS) 2.62 mm

O-ring STL file ID 24 × CS 3 mm (📦 #1046)

1 object(s) - format STL (5.0/5) 1 vote(s)
O-ring STL file ID 24 × CS 3 mm
3D model of rubber ring with Inner diameter 24 mm × CS 3  mm. Outer diameter (OD) corresponds to 30 mm.
Parameter Value Unit
inner diameter (ID) 24 mm
cross section (CS) 3 mm

O-ring STL file ID 25 × CS 3 mm (📦 #1045)

1 object(s) - format STL
O-ring STL file ID 25 × CS 3 mm
Model of O-ring with dimensions ID (inner diameter) 25 mm / thickness 3  mm. External diameter (OD) resulting corresponds to 31 mm.
Parameter Value Unit
inner diameter (ID) 25 mm
cross section (CS) 3 mm

O-ring STL file ID 24 × CS 2.8 mm (📦 #1389)

1 object(s) - format STL
O-ring STL file ID 24 × CS 2.8 mm
3D file of O-ring (torus-shaped seal) with dimensions ID 24 mm / CS (cross section) 2.8  mm. Final diameter resulting corresponds to 29.6 mm.
Parameter Value Unit
inner diameter (ID) 24 mm
cross section (CS) 2.8 mm

O-ring STL file ID 14 × CS 2.5 mm (📦 #1038)

1 object(s) - format STL
O-ring STL file ID 14 × CS 2.5 mm
Model of O-ring with ID (inner diameter) 14 mm / section thickness 2.5  mm. Outer diameter (OD) is therefore 19 mm.
Parameter Value Unit
inner diameter (ID) 14 mm
cross section (CS) 2.5 mm

O-ring STL file ID 11.8 × CS 2.5 mm (📦 #1922)

1 object(s) - format STL
O-ring STL file ID 11.8 × CS 2.5 mm
Model of O-ring with dimensions Inner diameter 11.8 mm × thickness 2.5  mm. Final diameter resulting is 16.8 mm.
Parameter Value Unit
inner diameter (ID) 11.8 mm
cross section (CS) 2.5 mm

O-ring STL file ID 15 × CS 2.5 mm (📦 #1018)

1 object(s) - format STL
O-ring STL file ID 15 × CS 2.5 mm
3D model of rubber ring with Inner diameter (ID) 15 mm / thickness 2.5  mm. The outer diameter resulting corresponds to 20 mm.
Parameter Value Unit
inner diameter (ID) 15 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 10 × CS 2.5 mm (📦 #1040)

1 object(s) - format STL
O-ring STL 3D file ID 10 × CS 2.5 mm
File of O-ring (torus-shaped seal) with ID (inner diameter) 10 mm / CS 2.5  mm. Outer diameter (OD) resulting is therefore 15 mm.
Parameter Value Unit
inner diameter (ID) 10 mm
cross section (CS) 2.5 mm

O-ring STL file ID 17 × CS 2.5 mm (📦 #1019)

1 object(s) - format STL
O-ring STL file ID 17 × CS 2.5 mm
File of rubber ring with ID (inner diameter) 17 mm / CS 2.5  mm. Outer diameter (OD) resulting corresponds to 22 mm.
Parameter Value Unit
inner diameter (ID) 17 mm
cross section (CS) 2.5 mm

O-ring STL file ID 26 × CS 3 mm (📦 #1022)

1 object(s) - format STL
O-ring STL file ID 26 × CS 3 mm
3D file of rubber ring with dimensions ID 26 mm × thickness 3  mm. The outer diameter resulting is therefore 32 mm.
Parameter Value Unit
inner diameter (ID) 26 mm
cross section (CS) 3 mm

O-ring STL file ID 20 × CS 2.5 mm (📦 #1030)

1 object(s) - format STL
O-ring STL file ID 20 × CS 2.5 mm
3D model of sealing ring with dimensions Internal diameter 20 mm by section thickness 2.5  mm. External diameter (OD) resulting is 25 mm.
Parameter Value Unit
inner diameter (ID) 20 mm
cross section (CS) 2.5 mm

O-ring STL file ID 5.3 × CS 2.4 mm (📦 #1014)

1 object(s) - format STL
O-ring STL file ID 5.3 × CS 2.4 mm
File of O-ring with dimensions ID (inner diameter) 5.3 mm / section thickness 2.4  mm. Outer diameter (OD) is 10.1 mm.
Parameter Value Unit
inner diameter (ID) 5.3 mm
cross section (CS) 2.4 mm

O-ring STL file ID 30 × CS 3 mm (📦 #1047)

1 object(s) - format STL
O-ring STL file ID 30 × CS 3 mm
STL model of circular seal with dimensions ID (inner diameter) 30 mm × section thickness 3  mm. The outer diameter is therefore 36 mm.
Parameter Value Unit
inner diameter (ID) 30 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 25 × CS 2.5 mm (📦 #1586)

1 object(s) - format STL
O-ring STL 3D file ID 25 × CS 2.5 mm
STL file of O-ring with Internal diameter 25 mm by CS (cross section) 2.5  mm. Outer diameter (OD) resulting is 30 mm.
Parameter Value Unit
inner diameter (ID) 25 mm
cross section (CS) 2.5 mm

O-ring STL file ID 26 × CS 2.5 mm (📦 #1437)

1 object(s) - format STL
O-ring STL file ID 26 × CS 2.5 mm
STL model of rubber ring with Internal diameter 26 mm / section thickness 2.5  mm. Final diameter is therefore 31 mm.
Parameter Value Unit
inner diameter (ID) 26 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 25 × CS 2.4 mm (📦 #1390)

1 object(s) - format STL
O-ring STL 3D file ID 25 × CS 2.4 mm
3D file in STL format of circular seal with dimensions Internal diameter (ID) 25 mm × CS 2.4  mm. The outer diameter corresponds to 29.8 mm.
Parameter Value Unit
inner diameter (ID) 25 mm
cross section (CS) 2.4 mm

O-ring STL 3D file ID 12.2 × CS 2.2 mm (📦 #1459)

1 object(s) - format STL
O-ring STL 3D file ID 12.2 × CS 2.2 mm
3D model of O-ring (torus-shaped seal) with dimensions Internal diameter 12.2 mm by section thickness 2.2  mm. The outer diameter is therefore 16.6 mm.
Parameter Value Unit
inner diameter (ID) 12.2 mm
cross section (CS) 2.2 mm

O-ring STL 3D file ID 28.5 × CS 3.5 mm (📦 #1581)

1 object(s) - format STL
O-ring STL 3D file ID 28.5 × CS 3.5 mm
STL file of rubber ring with dimensions ID (inner diameter) 28.5 mm by CS (cross section) 3.5  mm. Outer diameter (OD) resulting is 35.5 mm.
Parameter Value Unit
inner diameter (ID) 28.5 mm
cross section (CS) 3.5 mm

O-ring STL file ID 31 × CS 3.5 mm (📦 #1579)

1 object(s) - format STL
O-ring STL file ID 31 × CS 3.5 mm
STL model of rubber ring with Internal diameter 31 mm × CS 3.5  mm. External diameter (OD) resulting corresponds to 38 mm.
Parameter Value Unit
inner diameter (ID) 31 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 30.5 × CS 3.6 mm (📦 #1503)

1 object(s) - format STL
O-ring STL 3D file ID 30.5 × CS 3.6 mm
3D file in STL format of sealing ring with dimensions ID (inner diameter) 30.5 mm × CS (cross section) 3.6  mm. Outer diameter (OD) resulting corresponds to 37.7 mm.
Parameter Value Unit
inner diameter (ID) 30.5 mm
cross section (CS) 3.6 mm

O-ring STL 3D file ID 13 × CS 2 mm (📦 #1518)

1 object(s) - format STL
O-ring STL 3D file ID 13 × CS 2 mm
Model of sealing ring with Internal diameter (ID) 13 mm by section thickness 2  mm. External diameter (OD) resulting corresponds to 17 mm.
Parameter Value Unit
inner diameter (ID) 13 mm
cross section (CS) 2 mm

O-ring STL file ID 12 × CS 2 mm (📦 #1017)

1 object(s) - format STL
O-ring STL file ID 12 × CS 2 mm
STL model of circular seal with dimensions ID 12 mm / CS (cross section) 2  mm. Final diameter corresponds to 16 mm.
Parameter Value Unit
inner diameter (ID) 12 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 16 × CS 2 mm (📦 #1945)

1 object(s) - format STL
O-ring STL 3D file ID 16 × CS 2 mm
File of circular seal with dimensions Internal diameter (ID) 16 mm / thickness 2  mm. Final diameter resulting corresponds to 20 mm.
Parameter Value Unit
inner diameter (ID) 16 mm
cross section (CS) 2 mm

O-ring STL file ID 10 × CS 2 mm (📦 #1016)

1 object(s) - format STL (5.0/5) 1 vote(s)
O-ring STL file ID 10 × CS 2 mm
3D file in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 10 mm by CS (cross section) 2  mm. Outer diameter (OD) corresponds to 14 mm.
Parameter Value Unit
inner diameter (ID) 10 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 9 × CS 2 mm (📦 #2327)

1 object(s) - format STL
O-ring STL 3D file ID 9 × CS 2 mm
STL model of O-ring with Internal diameter (ID) 9 mm by thickness 2  mm. Final diameter resulting is therefore 13 mm.
Parameter Value Unit
inner diameter (ID) 9 mm
cross section (CS) 2 mm

O-ring STL file ID 17 × CS 4 mm (📦 #1262)

1 object(s) - format STL
O-ring STL file ID 17 × CS 4 mm
File of sealing ring with Internal diameter 17 mm by CS 4  mm. Outer diameter (OD, for outer diameter) resulting is therefore 25 mm.
Parameter Value Unit
inner diameter (ID) 17 mm
cross section (CS) 4 mm

O-ring STL file ID 8 × CS 2 mm (📦 #2362)

1 object(s) - format STL
O-ring STL file ID 8 × CS 2 mm
3D file of sealing ring with dimensions Inner diameter 8 mm / thickness 2  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 12 mm.
Parameter Value Unit
inner diameter (ID) 8 mm
cross section (CS) 2 mm

O-ring STL file ID 7 × CS 2 mm (📦 #1015)

1 object(s) - format STL
O-ring STL file ID 7 × CS 2 mm
Model of rubber ring with dimensions Inner diameter 7 mm × thickness 2  mm. Final diameter resulting is therefore 11 mm.
Parameter Value Unit
inner diameter (ID) 7 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 20 × CS 2 mm (📦 #1020)

1 object(s) - format STL (5.0/5) 1 vote(s)
O-ring STL 3D file ID 20 × CS 2 mm
3D model of O-ring (torus-shaped seal) with Inner diameter 20 mm × thickness 2  mm. External diameter (OD) is 24 mm.
Parameter Value Unit
inner diameter (ID) 20 mm
cross section (CS) 2 mm