O-ring STL file ID 70 × CS 3.5 mm 📦#1336
Generation date: 2025-08-11
3D model download
Free- o-ring-ID70mm-CS3.5mm_model133_model1336-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 70 mm |
| #2 | cross section (CS) | 3.5 mm |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O-ring STL file ID 70 × CS 4 mm (📦 #1681)
1 object(s) - format STL
STL file of sealing ring with dimensions Internal diameter 70 mm / CS 4 mm. External diameter (OD) is therefore 78 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 70 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 84 × CS 3 mm (📦 #1807)
1 object(s) - format STL
File of sealing ring with dimensions Inner diameter 84 mm / CS 3 mm. Final diameter corresponds to 90 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 84 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 90 × CS 3.5 mm (📦 #1328)
1 object(s) - format STL
STL model of O-ring (torus-shaped seal) with dimensions ID 90 mm × section thickness 3.5 mm. Outer diameter (OD) resulting corresponds to 97 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 90 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL file ID 54 × CS 3 mm (📦 #1806)
1 object(s) - format STL
Model of O-ring (torus-shaped seal) with Internal diameter 54 mm by CS 3 mm. The outer diameter resulting is 60 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 54 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 72.4 × CS 2.6 mm (📦 #2004)
1 object(s) - format STL
3D file in STL format of sealing ring with Internal diameter 72.4 mm by thickness 2.6 mm. External diameter (OD) corresponds to 77.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 72.4 | mm |
| cross section (CS) | 2.6 | mm |
O-ring STL file ID 90 × CS 4 mm (📦 #2183)
1 object(s) - format STL
STL model of O-ring (torus-shaped seal) with Internal diameter 90 mm by CS 4 mm. Outer diameter (OD, for outer diameter) is 98 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 90 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 50 × CS 3 mm (📦 #2430)
1 object(s) - format STL
3D model in STL format of sealing ring with dimensions ID 50 mm by CS (cross section) 3 mm. Outer diameter (OD) is therefore 56 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 50 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 80 × CS 2.5 mm (📦 #1348)
1 object(s) - format STL
3D model of O-ring (torus-shaped seal) with ID (inner diameter) 80 mm × CS 2.5 mm. Outer diameter (OD) is therefore 85 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 80 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 42 × CS 3.5 mm (📦 #2201)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 42 mm by CS (cross section) 3.5 mm. The outer diameter resulting corresponds to 49 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 42 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 42 × CS 3.6 mm (📦 #2226)
1 object(s) - format STL
3D model of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 42 mm × CS (cross section) 3.6 mm. Outer diameter (OD, for outer diameter) resulting is therefore 49.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 42 | mm |
| cross section (CS) | 3.6 | mm |
O-ring STL 3D file ID 42 × CS 4 mm (📦 #1500)
1 object(s) - format STL
3D file in STL format of sealing ring with ID (inner diameter) 42 mm / CS (cross section) 4 mm. External diameter (OD) is therefore 50 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 42 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 50 × CS 2.5 mm (📦 #1057)
1 object(s) - format STL
3D file in STL format of rubber ring with ID (inner diameter) 50 mm / thickness 2.5 mm. Outer diameter (OD) resulting corresponds to 55 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 50 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL file ID 40 × CS 4 mm (📦 #1055)
1 object(s) - format STL
STL file of O-ring with dimensions ID (inner diameter) 40 mm / section thickness 4 mm. The outer diameter resulting is 48 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 40 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 36 × CS 3.5 mm (📦 #2203)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 36 mm / CS (cross section) 3.5 mm. Outer diameter (OD, for outer diameter) corresponds to 43 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 36 × CS 3.6 mm (📦 #2227)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with ID 36 mm × CS (cross section) 3.6 mm. Final diameter corresponds to 43.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36 | mm |
| cross section (CS) | 3.6 | mm |
O-ring STL file ID 80 × CS 5 mm (📦 #1547)
1 object(s) - format STL
File of rubber ring with Internal diameter (ID) 80 mm by thickness 5 mm. Final diameter resulting is therefore 90 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 80 | mm |
| cross section (CS) | 5 | mm |
O-ring STL 3D file ID 37.75 × CS 2.62 mm (📦 #1034)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with ID 37.75 mm / CS (cross section) 2.62 mm. Outer diameter (OD, for outer diameter) is therefore 42.99 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 37.75 | mm |
| cross section (CS) | 2.62 | mm |
O-ring STL file ID 31 × CS 3.5 mm (📦 #1579)
1 object(s) - format STL
STL model of rubber ring with Internal diameter 31 mm × CS 3.5 mm. External diameter (OD) resulting corresponds to 38 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 31 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 30.5 × CS 3.6 mm (📦 #1503)
1 object(s) - format STL
3D file in STL format of sealing ring with dimensions ID (inner diameter) 30.5 mm × CS (cross section) 3.6 mm. Outer diameter (OD) resulting corresponds to 37.7 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 30.5 | mm |
| cross section (CS) | 3.6 | mm |
O-ring STL 3D file ID 36.7 × CS 2.6 mm (📦 #1950)
1 object(s) - format STL
3D model in STL format of sealing ring with dimensions Inner diameter 36.7 mm / CS 2.6 mm. The outer diameter resulting is 41.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36.7 | mm |
| cross section (CS) | 2.6 | mm |
O-ring STL file ID 32 × CS 4 mm (📦 #2202)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter 32 mm / CS (cross section) 4 mm. Outer diameter (OD) corresponds to 40 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 32 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 36.4 × CS 2.6 mm (📦 #1951)
1 object(s) - format STL
3D model of O-ring with Internal diameter 36.4 mm by CS 2.6 mm. External diameter (OD) resulting is 41.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36.4 | mm |
| cross section (CS) | 2.6 | mm |
O-ring STL 3D file ID 50 × CS 5 mm (📦 #1595)
1 object(s) - format STL
Model of circular seal with ID (inner diameter) 50 mm / thickness 5 mm. Final diameter corresponds to 60 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 50 | mm |
| cross section (CS) | 5 | mm |
O-ring STL 3D file ID 28.5 × CS 3.5 mm (📦 #1581)
1 object(s) - format STL
STL file of rubber ring with dimensions ID (inner diameter) 28.5 mm by CS (cross section) 3.5 mm. Outer diameter (OD) resulting is 35.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 28.5 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 30 × CS 4 mm (📦 #1023)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 30 mm by CS (cross section) 4 mm. Final diameter is 38 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 30 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 30 × CS 3 mm (📦 #1047)
1 object(s) - format STL
STL model of circular seal with dimensions ID (inner diameter) 30 mm × section thickness 3 mm. The outer diameter is therefore 36 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 30 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 110 × CS 4 mm (📦 #1399)
1 object(s) - format STL
Model of O-ring with dimensions Internal diameter 110 mm by CS (cross section) 4 mm. Final diameter resulting corresponds to 118 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 110 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 48 × CS 5 mm (📦 #1373)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 48 mm × thickness 5 mm. External diameter (OD) resulting is 58 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 48 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 45 × CS 5 mm (📦 #1212)
1 object(s) - format STL
3D model of sealing ring with dimensions ID (inner diameter) 45 mm by thickness 5 mm. The outer diameter is 55 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 45 | mm |
| cross section (CS) | 5 | mm |
O-ring STL 3D file ID 45 × CS 2 mm (📦 #1675)
1 object(s) - format STL
STL file of O-ring with Internal diameter 45 mm × CS (cross section) 2 mm. Outer diameter (OD) is therefore 49 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 45 | mm |
| cross section (CS) | 2 | mm |