O-ring STL 3D file ID 36.4 × CS 2.6 mm 📦#1951
Generation date: 2025-09-23
3D model download
Free- o-ring-ID36.4mm-CS2.6mm_model1_model1951-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 36.4 mm |
| #2 | cross section (CS) | 2.6 mm |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O-ring STL 3D file ID 36.7 × CS 2.6 mm (📦 #1950)
1 object(s) - format STL
3D model in STL format of sealing ring with dimensions Inner diameter 36.7 mm / CS 2.6 mm. The outer diameter resulting is 41.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36.7 | mm |
| cross section (CS) | 2.6 | mm |
O-ring STL 3D file ID 37.75 × CS 2.62 mm (📦 #1034)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with ID 37.75 mm / CS (cross section) 2.62 mm. Outer diameter (OD, for outer diameter) is therefore 42.99 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 37.75 | mm |
| cross section (CS) | 2.62 | mm |
O-ring STL file ID 26 × CS 2.5 mm (📦 #1437)
1 object(s) - format STL
STL model of rubber ring with Internal diameter 26 mm / section thickness 2.5 mm. Final diameter is therefore 31 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 26 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL file ID 30 × CS 3 mm (📦 #1047)
1 object(s) - format STL
STL model of circular seal with dimensions ID (inner diameter) 30 mm × section thickness 3 mm. The outer diameter is therefore 36 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 30 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 25 × CS 2.5 mm (📦 #1586)
1 object(s) - format STL
STL file of O-ring with Internal diameter 25 mm by CS (cross section) 2.5 mm. Outer diameter (OD) resulting is 30 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 25 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 25 × CS 2.4 mm (📦 #1390)
1 object(s) - format STL
3D file in STL format of circular seal with dimensions Internal diameter (ID) 25 mm × CS 2.4 mm. The outer diameter corresponds to 29.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 25 | mm |
| cross section (CS) | 2.4 | mm |
O-ring STL file ID 24 × CS 2.8 mm (📦 #1389)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with dimensions ID 24 mm / CS (cross section) 2.8 mm. Final diameter resulting corresponds to 29.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 24 | mm |
| cross section (CS) | 2.8 | mm |
O-ring STL 3D file ID 50 × CS 2.5 mm (📦 #1057)
1 object(s) - format STL
3D file in STL format of rubber ring with ID (inner diameter) 50 mm / thickness 2.5 mm. Outer diameter (OD) resulting corresponds to 55 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 50 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL file ID 26 × CS 3 mm (📦 #1022)
1 object(s) - format STL
3D file of rubber ring with dimensions ID 26 mm × thickness 3 mm. The outer diameter resulting is therefore 32 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 26 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 36 × CS 2 mm (📦 #2163)
1 object(s) - format STL
File of O-ring with Internal diameter (ID) 36 mm × CS (cross section) 2 mm. Outer diameter (OD, for outer diameter) resulting is 40 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 40 × CS 2 mm (📦 #1054)
1 object(s) - format STL
STL file of sealing ring with Internal diameter (ID) 40 mm by CS 2 mm. External diameter (OD) resulting is therefore 44 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 40 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 25 × CS 3 mm (📦 #1045)
1 object(s) - format STL
Model of O-ring with dimensions ID (inner diameter) 25 mm / thickness 3 mm. External diameter (OD) resulting corresponds to 31 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 25 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 24 × CS 3 mm (📦 #1046)
1 object(s) - format STL (5.0/5) 1 vote(s)
3D model of rubber ring with Inner diameter 24 mm × CS 3 mm. Outer diameter (OD) corresponds to 30 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 24 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 30 × CS 2 mm (📦 #1118)
1 object(s) - format STL (5.0/5) 1 vote(s)
File of circular seal with dimensions ID 30 mm / thickness 2 mm. Outer diameter (OD, for outer diameter) resulting corresponds to 34 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 30 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 20 × CS 2.5 mm (📦 #1030)
1 object(s) - format STL
3D model of sealing ring with dimensions Internal diameter 20 mm by section thickness 2.5 mm. External diameter (OD) resulting is 25 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 20 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 50 × CS 3 mm (📦 #2430)
1 object(s) - format STL
3D model in STL format of sealing ring with dimensions ID 50 mm by CS (cross section) 3 mm. Outer diameter (OD) is therefore 56 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 50 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 45 × CS 2 mm (📦 #1675)
1 object(s) - format STL
STL file of O-ring with Internal diameter 45 mm × CS (cross section) 2 mm. Outer diameter (OD) is therefore 49 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 45 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 17 × CS 2.5 mm (📦 #1019)
1 object(s) - format STL
File of rubber ring with ID (inner diameter) 17 mm / CS 2.5 mm. Outer diameter (OD) resulting corresponds to 22 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL file ID 54 × CS 3 mm (📦 #1806)
1 object(s) - format STL
Model of O-ring (torus-shaped seal) with Internal diameter 54 mm by CS 3 mm. The outer diameter resulting is 60 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 54 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 16 × CS 2.62 mm (📦 #1043)
1 object(s) - format STL
STL file of circular seal with ID (inner diameter) 16 mm / section thickness 2.62 mm. Final diameter corresponds to 21.24 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 16 | mm |
| cross section (CS) | 2.62 | mm |
O-ring STL file ID 22 × CS 2 mm (📦 #1021)
1 object(s) - format STL
STL model of O-ring with ID 22 mm by CS 2 mm. External diameter (OD) is therefore 26 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 22 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 15 × CS 2.5 mm (📦 #1018)
1 object(s) - format STL
3D model of rubber ring with Inner diameter (ID) 15 mm / thickness 2.5 mm. The outer diameter resulting corresponds to 20 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 15 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 36 × CS 3.5 mm (📦 #2203)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 36 mm / CS (cross section) 3.5 mm. Outer diameter (OD, for outer diameter) corresponds to 43 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 20 × CS 2 mm (📦 #1020)
1 object(s) - format STL (5.0/5) 1 vote(s)
3D model of O-ring (torus-shaped seal) with Inner diameter 20 mm × thickness 2 mm. External diameter (OD) is 24 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 20 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 31 × CS 3.5 mm (📦 #1579)
1 object(s) - format STL
STL model of rubber ring with Internal diameter 31 mm × CS 3.5 mm. External diameter (OD) resulting corresponds to 38 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 31 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 42 × CS 3.5 mm (📦 #2201)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 42 mm by CS (cross section) 3.5 mm. The outer diameter resulting corresponds to 49 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 42 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL file ID 14 × CS 2.5 mm (📦 #1038)
1 object(s) - format STL
Model of O-ring with ID (inner diameter) 14 mm / section thickness 2.5 mm. Outer diameter (OD) is therefore 19 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 14 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 28.5 × CS 3.5 mm (📦 #1581)
1 object(s) - format STL
STL file of rubber ring with dimensions ID (inner diameter) 28.5 mm by CS (cross section) 3.5 mm. Outer diameter (OD) resulting is 35.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 28.5 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL file ID 12.37 × CS 2.62 mm (📦 #1031)
1 object(s) - format STL (5.0/5) 2 vote(s)
3D file in STL format of sealing ring with Inner diameter (ID) 12.37 mm × section thickness 2.62 mm. The outer diameter resulting is 17.61 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12.37 | mm |
| cross section (CS) | 2.62 | mm |
O-ring STL 3D file ID 36 × CS 3.6 mm (📦 #2227)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with ID 36 mm × CS (cross section) 3.6 mm. Final diameter corresponds to 43.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36 | mm |
| cross section (CS) | 3.6 | mm |