O-ring ID 40 × CS 2 mm 📦#1054

STL file of sealing ring with Internal diameter (ID) 40 mm by CS 2 mm. External diameter (OD) resulting is therefore 44 mm.

Generation date: 2025-05-29

3D model download

Free

Download format: zip : 1.5 Mo (1 file(s))

o-ring-ID40mm-CS2mm_model1054-_model1054-nb0_dd{id}.stl : 1.5 Mo

STL Mesh quality : not defined

License: CC0 - Creative commons

(no copyright - public domain)

Values for this model

This model was generated by the O-ring template, with the following values:

	Template parameter	Value	Unit	Label
#1	inner diameter (ID)	40	mm	ID
#2	cross section (CS)	2	mm	CS

Representation of the parameters

See details

To determine the outer diameter (OD), apply the formula OD = ID + 2×CS.

Related 3D models

To search for a model based on your own parameters, go to the template page O-ring

O-ring ID 30 × CS 2 mm (📦 #1118)

1 object(s) - format STL (5.0/5) 1 vote(s)

3D model O-ring ID 30 × CS 2 mm

File of circular seal with dimensions ID 30 mm / thickness 2 mm. Outer diameter (OD, for outer diameter) resulting corresponds to 34 mm.

Parameter	Value	Unit
inner diameter (ID)	30	mm
cross section (CS)	2	mm

O-ring ID 45 × CS 1.5 mm (📦 #1343)

1 object(s) - format STL

3D model O-ring ID 45 × CS 1.5 mm

3D file in STL format of O-ring with ID (inner diameter) 45 mm by section thickness 1.5 mm. Outer diameter (OD) corresponds to 48 mm.

Parameter	Value	Unit
inner diameter (ID)	45	mm
cross section (CS)	1.5	mm

O-ring ID 50 × CS 2.5 mm (📦 #1057)

1 object(s) - format STL

3D model O-ring ID 50 × CS 2.5 mm

3D file in STL format of rubber ring with ID (inner diameter) 50 mm / thickness 2.5 mm. Outer diameter (OD) resulting corresponds to 55 mm.

Parameter	Value	Unit
inner diameter (ID)	50	mm
cross section (CS)	2.5	mm

O-ring ID 37.75 × CS 2.62 mm (📦 #1034)

1 object(s) - format STL

3D model O-ring ID 37.75 × CS 2.62 mm

3D file of O-ring (torus-shaped seal) with ID 37.75 mm / CS (cross section) 2.62 mm. Outer diameter (OD, for outer diameter) is therefore 42.99 mm.

Parameter	Value	Unit
inner diameter (ID)	37...	mm
cross section (CS)	2.62	mm

O-ring ID 22 × CS 2 mm (📦 #1021)

1 object(s) - format STL

3D model O-ring ID 22 × CS 2 mm

STL model of O-ring with ID 22 mm by CS 2 mm. External diameter (OD) is therefore 26 mm.

Parameter	Value	Unit
inner diameter (ID)	22	mm
cross section (CS)	2	mm

O-ring ID 25 × CS 2.4 mm (📦 #1390)

1 object(s) - format STL

3D model O-ring ID 25 × CS 2.4 mm

3D file in STL format of circular seal with dimensions Internal diameter (ID) 25 mm × CS 2.4 mm. The outer diameter corresponds to 29.8 mm.

Parameter	Value	Unit
inner diameter (ID)	25	mm
cross section (CS)	2.4	mm

O-ring ID 20 × CS 2 mm (📦 #1020)

1 object(s) - format STL (5.0/5) 1 vote(s)

3D model O-ring ID 20 × CS 2 mm

3D model of O-ring (torus-shaped seal) with Inner diameter 20 mm × thickness 2 mm. External diameter (OD) is 24 mm.

Parameter	Value	Unit
inner diameter (ID)	20	mm
cross section (CS)	2	mm

O-ring ID 26 × CS 2.5 mm (📦 #1437)

1 object(s) - format STL

3D model O-ring ID 26 × CS 2.5 mm

STL model of rubber ring with Internal diameter 26 mm / section thickness 2.5 mm. Final diameter is therefore 31 mm.

Parameter	Value	Unit
inner diameter (ID)	26	mm
cross section (CS)	2.5	mm

O-ring ID 20 × CS 2.5 mm (📦 #1030)

1 object(s) - format STL

3D model O-ring ID 20 × CS 2.5 mm

3D model of sealing ring with dimensions Internal diameter 20 mm by section thickness 2.5 mm. External diameter (OD) resulting is 25 mm.

Parameter	Value	Unit
inner diameter (ID)	20	mm
cross section (CS)	2.5	mm

O-ring ID 17 × CS 2.5 mm (📦 #1019)

1 object(s) - format STL

3D model O-ring ID 17 × CS 2.5 mm

File of rubber ring with ID (inner diameter) 17 mm / CS 2.5 mm. Outer diameter (OD) resulting corresponds to 22 mm.

Parameter	Value	Unit
inner diameter (ID)	17	mm
cross section (CS)	2.5	mm

O-ring ID 24 × CS 2.8 mm (📦 #1389)

1 object(s) - format STL

3D model O-ring ID 24 × CS 2.8 mm

3D file of O-ring (torus-shaped seal) with dimensions ID 24 mm / CS (cross section) 2.8 mm. Final diameter resulting corresponds to 29.6 mm.

Parameter	Value	Unit
inner diameter (ID)	24	mm
cross section (CS)	2.8	mm

O-ring ID 12 × CS 2 mm (📦 #1017)

1 object(s) - format STL

3D model O-ring ID 12 × CS 2 mm

STL model of circular seal with dimensions ID 12 mm / CS (cross section) 2 mm. Final diameter corresponds to 16 mm.

Parameter	Value	Unit
inner diameter (ID)	12	mm
cross section (CS)	2	mm

O-ring ID 12.2 × CS 2.2 mm (📦 #1459)

1 object(s) - format STL

3D model O-ring ID 12.2 × CS 2.2 mm

3D model of O-ring (torus-shaped seal) with dimensions Internal diameter 12.2 mm by section thickness 2.2 mm. The outer diameter is therefore 16.6 mm.

Parameter	Value	Unit
inner diameter (ID)	12.2	mm
cross section (CS)	2.2	mm

O-ring ID 15 × CS 2.5 mm (📦 #1018)

1 object(s) - format STL

3D model O-ring ID 15 × CS 2.5 mm

3D model of rubber ring with Inner diameter (ID) 15 mm / thickness 2.5 mm. The outer diameter resulting corresponds to 20 mm.

Parameter	Value	Unit
inner diameter (ID)	15	mm
cross section (CS)	2.5	mm

O-ring ID 14 × CS 2.5 mm (📦 #1038)

1 object(s) - format STL

3D model O-ring ID 14 × CS 2.5 mm

Model of O-ring with ID (inner diameter) 14 mm / section thickness 2.5 mm. Outer diameter (OD) is therefore 19 mm.

Parameter	Value	Unit
inner diameter (ID)	14	mm
cross section (CS)	2.5	mm

O-ring ID 16 × CS 2.62 mm (📦 #1043)

1 object(s) - format STL

3D model O-ring ID 16 × CS 2.62 mm

STL file of circular seal with ID (inner diameter) 16 mm / section thickness 2.62 mm. Final diameter corresponds to 21.24 mm.

Parameter	Value	Unit
inner diameter (ID)	16	mm
cross section (CS)	2.62	mm

O-ring ID 10 × CS 2 mm (📦 #1016)

1 object(s) - format STL (5.0/5) 1 vote(s)

3D model O-ring ID 10 × CS 2 mm

3D file in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 10 mm by CS (cross section) 2 mm. Outer diameter (OD) corresponds to 14 mm.

Parameter	Value	Unit
inner diameter (ID)	10	mm
cross section (CS)	2	mm

O-ring ID 30 × CS 3 mm (📦 #1047)

1 object(s) - format STL

3D model O-ring ID 30 × CS 3 mm

STL model of circular seal with dimensions ID (inner diameter) 30 mm × section thickness 3 mm. The outer diameter is therefore 36 mm.

Parameter	Value	Unit
inner diameter (ID)	30	mm
cross section (CS)	3	mm

O-ring ID 12 × CS 1.5 mm (📦 #1036)

1 object(s) - format STL

3D model O-ring ID 12 × CS 1.5 mm

File of rubber ring with Inner diameter 12 mm × CS (cross section) 1.5 mm. Outer diameter (OD, for outer diameter) resulting is therefore 15 mm.

Parameter	Value	Unit
inner diameter (ID)	12	mm
cross section (CS)	1.5	mm

O-ring ID 26 × CS 3 mm (📦 #1022)

1 object(s) - format STL

3D model O-ring ID 26 × CS 3 mm

3D file of rubber ring with dimensions ID 26 mm × thickness 3 mm. The outer diameter resulting is therefore 32 mm.

Parameter	Value	Unit
inner diameter (ID)	26	mm
cross section (CS)	3	mm

O-ring ID 25 × CS 3 mm (📦 #1045)

1 object(s) - format STL

3D model O-ring ID 25 × CS 3 mm

Model of O-ring with dimensions ID (inner diameter) 25 mm / thickness 3 mm. External diameter (OD) resulting corresponds to 31 mm.

Parameter	Value	Unit
inner diameter (ID)	25	mm
cross section (CS)	3	mm

O-ring ID 24 × CS 3 mm (📦 #1046)

1 object(s) - format STL

3D model O-ring ID 24 × CS 3 mm

3D model of rubber ring with Inner diameter 24 mm × CS 3 mm. Outer diameter (OD) corresponds to 30 mm.

Parameter	Value	Unit
inner diameter (ID)	24	mm
cross section (CS)	3	mm

O-ring ID 12.37 × CS 2.62 mm (📦 #1031)

1 object(s) - format STL (5.0/5) 2 vote(s)

3D model O-ring ID 12.37 × CS 2.62 mm

3D file in STL format of sealing ring with Inner diameter (ID) 12.37 mm × section thickness 2.62 mm. The outer diameter resulting is 17.61 mm.

Parameter	Value	Unit
inner diameter (ID)	12...	mm
cross section (CS)	2.62	mm

O-ring ID 7 × CS 2 mm (📦 #1015)

1 object(s) - format STL

3D model O-ring ID 7 × CS 2 mm

Model of rubber ring with dimensions Inner diameter 7 mm × thickness 2 mm. Final diameter resulting is therefore 11 mm.

Parameter	Value	Unit
inner diameter (ID)	7	mm
cross section (CS)	2	mm

O-ring ID 10 × CS 2.5 mm (📦 #1040)

1 object(s) - format STL

3D model O-ring ID 10 × CS 2.5 mm

File of O-ring (torus-shaped seal) with ID (inner diameter) 10 mm / CS 2.5 mm. Outer diameter (OD) resulting is therefore 15 mm.

Parameter	Value	Unit
inner diameter (ID)	10	mm
cross section (CS)	2.5	mm

O-ring ID 6.07 × CS 1.78 mm (📦 #1033)

1 object(s) - format STL

3D model O-ring ID 6.07 × CS 1.78 mm

3D model of sealing ring with Internal diameter 6.07 mm by CS 1.78 mm. The outer diameter is 9.63 mm.

Parameter	Value	Unit
inner diameter (ID)	6.07	mm
cross section (CS)	1.78	mm

O-ring ID 5.2 × CS 2 mm (📦 #1056)

1 object(s) - format STL

3D model O-ring ID 5.2 × CS 2 mm

3D file of O-ring (torus-shaped seal) with Internal diameter 5.2 mm / CS 2 mm. Final diameter resulting corresponds to 9.2 mm.

Parameter	Value	Unit
inner diameter (ID)	5.2	mm
cross section (CS)	2	mm

O-ring ID 5 × CS 2 mm (📦 #1035)

1 object(s) - format STL

3D model O-ring ID 5 × CS 2 mm

3D file in STL format of circular seal with dimensions Internal diameter 5 mm × CS 2 mm. Outer diameter (OD, for outer diameter) resulting is therefore 9 mm.

Parameter	Value	Unit
inner diameter (ID)	5	mm
cross section (CS)	2	mm

O-ring ID 7 × CS 1.5 mm (📦 #1039)

1 object(s) - format STL

3D model O-ring ID 7 × CS 1.5 mm

3D file in STL format of O-ring with dimensions Internal diameter 7 mm / CS 1.5 mm. External diameter (OD) is therefore 10 mm.

Parameter	Value	Unit
inner diameter (ID)	7	mm
cross section (CS)	1.5	mm

O-ring ID 4.47 × CS 1.78 mm (📦 #1037)

1 object(s) - format STL

3D model O-ring ID 4.47 × CS 1.78 mm

File of circular seal with dimensions ID (inner diameter) 4.47 mm × section thickness 1.78 mm. Final diameter is therefore 8.03 mm.

Parameter	Value	Unit
inner diameter (ID)	4.47	mm
cross section (CS)	1.78	mm