?>

Custom O'ring STL file ID 44 × CS 1.5 mm 📦#3888

STL Download STL 1
Create a new model:
from scratch search for a model
3D file in STL format of circular seal with dimensions ID 44 mm by thickness 1.5  mm. Outer diameter (OD, for outer diameter) is therefore 47 mm.
Generation date: 2025-11-27
3D Model O'ring STL file ID 44 × CS 1.5 mm

3D model download

Free
  • o-ring-ID44mm-CS1.5mm_model388_model3888-nb0_dd{id}.stl : 1.5 Mo
STL Mesh quality : not defined
No compliance warranty No compliance warranty
(no copyright - public domain)
Safe download

Values for this model

This model was generated by the O-ring template, with the following values:
Parameter Value
#1 inner diameter (ID) 44 mm (≃1.73 in)
#2 cross section (CS) 1.5 mm (≃1/16 in)
Metadata Value
outer diameter (OD) 47 mm (≃1.85 in)
illustration of the parameters
Parameter overview

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 inner diameter (ID) ID
#2 cross section (CS) CS

Related 3D models

To search for a model based on your own parameters, go to the template page O-ring 

O-ring STL 3D file ID 45 × CS 1.5 mm (📦 #1343)

1 object(s) - format STL
O-ring STL 3D file ID 45 × CS 1.5 mm
3D file in STL format of O-ring with ID (inner diameter) 45 mm by section thickness 1.5  mm. Outer diameter (OD) corresponds to 48 mm.
Parameter Value Unit
inner diameter (ID) 45 mm
cross section (CS) 1.5 mm

O-ring STL file ID 43 × CS 1.5 mm (📦 #3908)

1 object(s) - format STL
O-ring STL file ID 43 × CS 1.5 mm
3D file in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 43 mm by section thickness 1.5  mm. Outer diameter (OD) is 46 mm.
Parameter Value Unit
inner diameter (ID) 43 mm
cross section (CS) 1.5 mm

O'ring STL 3D file ID 48 × CS 1.7 mm (📦 #2177)

1 object(s) - format STL
o'ring STL 3D file ID 48 × CS 1.7 mm
Model of O-ring (torus-shaped seal) with Inner diameter 48 mm by section thickness 1.7  mm. Outer diameter (OD) resulting is 51.4 mm.
Parameter Value Unit
inner diameter (ID) 48 mm
cross section (CS) 1.7 mm

O-ring STL 3D file ID 45 × CS 2 mm (📦 #1675)

1 object(s) - format STL
O-ring STL 3D file ID 45 × CS 2 mm
STL file of O-ring with Internal diameter 45 mm × CS (cross section) 2  mm. Outer diameter (OD) is therefore 49 mm.
Parameter Value Unit
inner diameter (ID) 45 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 41.7 × CS 2 mm (📦 #2888)

1 object(s) - format STL
O-ring STL 3D file ID 41.7 × CS 2 mm
3D file of rubber ring with Inner diameter (ID) 41.7 mm by CS (cross section) 2  mm. The outer diameter resulting is therefore 45.7 mm.
Parameter Value Unit
inner diameter (ID) 41.7 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 40 × CS 2 mm (📦 #1054)

1 object(s) - format STL
O-ring STL 3D file ID 40 × CS 2 mm
STL file of sealing ring with Internal diameter (ID) 40 mm by CS 2  mm. External diameter (OD) resulting is therefore 44 mm.
Parameter Value Unit
inner diameter (ID) 40 mm
cross section (CS) 2 mm

O-ring STL file ID 36 × CS 2 mm (📦 #2163)

1 object(s) - format STL
O-ring STL file ID 36 × CS 2 mm
File of O-ring with Internal diameter (ID) 36 mm × CS (cross section) 2  mm. Outer diameter (OD, for outer diameter) resulting is 40 mm.
Parameter Value Unit
inner diameter (ID) 36 mm
cross section (CS) 2 mm

O-ring STL file ID 29 × CS 1.5 mm (📦 #3881)

1 object(s) - format STL
O-ring STL file ID 29 × CS 1.5 mm
File of rubber ring with Inner diameter 29 mm by thickness 1.5  mm. The outer diameter resulting corresponds to 32 mm.
Parameter Value Unit
inner diameter (ID) 29 mm
cross section (CS) 1.5 mm

O-ring STL file ID 28 × CS 1.5 mm (📦 #3886)

1 object(s) - format STL
O-ring STL file ID 28 × CS 1.5 mm
3D model in STL format of O-ring (torus-shaped seal) with Internal diameter 28 mm / CS (cross section) 1.5  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 31 mm.
Parameter Value Unit
inner diameter (ID) 28 mm
cross section (CS) 1.5 mm

O'ring STL file ID 27 × CS 1.5 mm (📦 #3913)

1 object(s) - format STL
o'ring STL file ID 27 × CS 1.5 mm
3D model of sealing ring with dimensions Internal diameter (ID) 27 mm × CS (cross section) 1.5  mm. Final diameter resulting is 30 mm.
Parameter Value Unit
inner diameter (ID) 27 mm
cross section (CS) 1.5 mm

O-ring STL file ID 30 × CS 2 mm (📦 #1118)

1 object(s) - format STL (5.0/5) 1 vote(s)
O-ring STL file ID 30 × CS 2 mm
File of circular seal with dimensions ID 30 mm / thickness 2  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 34 mm.
Parameter Value Unit
inner diameter (ID) 30 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 26 × CS 1.5 mm (📦 #3912)

1 object(s) - format STL
O-ring STL 3D file ID 26 × CS 1.5 mm
Model of circular seal with Internal diameter (ID) 26 mm × CS 1.5  mm. The outer diameter resulting is therefore 29 mm.
Parameter Value Unit
inner diameter (ID) 26 mm
cross section (CS) 1.5 mm

O-ring STL 3D file ID 25 × CS 1.5 mm (📦 #3910)

1 object(s) - format STL
O-ring STL 3D file ID 25 × CS 1.5 mm
STL file of sealing ring with dimensions ID (inner diameter) 25 mm / section thickness 1.5  mm. Outer diameter (OD) resulting is therefore 28 mm.
Parameter Value Unit
inner diameter (ID) 25 mm
cross section (CS) 1.5 mm

O-ring STL 3D file ID 60 × CS 2 mm (📦 #3666)

1 object(s) - format STL
O-ring STL 3D file ID 60 × CS 2 mm
3D file of circular seal with ID 60 mm by CS 2  mm. Outer diameter (OD, for outer diameter) resulting is therefore 64 mm.
Parameter Value Unit
inner diameter (ID) 60 mm
cross section (CS) 2 mm

O-ring STL file ID 62 × CS 2 mm (📦 #3582)

1 object(s) - format STL
O-ring STL file ID 62 × CS 2 mm
STL model of rubber ring with dimensions Inner diameter 62 mm × section thickness 2  mm. Final diameter resulting corresponds to 66 mm.
Parameter Value Unit
inner diameter (ID) 62 mm
cross section (CS) 2 mm

O'ring STL file ID 25 × CS 2 mm (📦 #2571)

1 object(s) - format STL
o'ring STL file ID 25 × CS 2 mm
STL file of rubber ring with dimensions Inner diameter (ID) 25 mm / thickness 2  mm. Outer diameter (OD) corresponds to 29 mm.
Parameter Value Unit
inner diameter (ID) 25 mm
cross section (CS) 2 mm

O'ring STL file ID 24 × CS 2 mm (📦 #2587)

1 object(s) - format STL
o'ring STL file ID 24 × CS 2 mm
Model of circular seal with Inner diameter 24 mm / CS 2  mm. Final diameter resulting is 28 mm.
Parameter Value Unit
inner diameter (ID) 24 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 49 × CS 2.5 mm (📦 #3308)

1 object(s) - format STL
O-ring STL 3D file ID 49 × CS 2.5 mm
Model of O-ring with dimensions ID (inner diameter) 49 mm × thickness 2.5  mm. Final diameter resulting is therefore 54 mm.
Parameter Value Unit
inner diameter (ID) 49 mm
cross section (CS) 2.5 mm

O-ring STL file ID 50 × CS 2.5 mm (📦 #1057)

1 object(s) - format STL
O-ring STL file ID 50 × CS 2.5 mm
3D file in STL format of rubber ring with ID (inner diameter) 50 mm / thickness 2.5 mm. Outer diameter (OD) resulting corresponds to 55 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 23 × CS 2 mm (📦 #2588)

1 object(s) - format STL
O-ring STL 3D file ID 23 × CS 2 mm
File of O-ring with ID 23 mm × CS (cross section) 2  mm. The outer diameter is 27 mm.
Parameter Value Unit
inner diameter (ID) 23 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 22 × CS 2 mm (📦 #1021)

1 object(s) - format STL
O-ring STL 3D file ID 22 × CS 2 mm
STL model of O-ring with ID 22 mm by CS 2  mm. External diameter (OD) is therefore 26 mm.
Parameter Value Unit
inner diameter (ID) 22 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 36.7 × CS 2.6 mm (📦 #1950)

1 object(s) - format STL
O-ring STL 3D file ID 36.7 × CS 2.6 mm
3D model in STL format of sealing ring with dimensions Inner diameter 36.7 mm / CS 2.6  mm. The outer diameter resulting is 41.9 mm.
Parameter Value Unit
inner diameter (ID) 36.7 mm
cross section (CS) 2.6 mm

O'ring STL file ID 36.4 × CS 2.6 mm (📦 #1951)

1 object(s) - format STL
o'ring STL file ID 36.4 × CS 2.6 mm
3D model of O-ring with Internal diameter 36.4 mm by CS 2.6  mm. External diameter (OD) resulting is 41.6 mm.
Parameter Value Unit
inner diameter (ID) 36.4 mm
cross section (CS) 2.6 mm

O-ring STL 3D file ID 37.75 × CS 2.62 mm (📦 #1034)

1 object(s) - format STL
O-ring STL 3D file ID 37.75 × CS 2.62 mm
3D file of O-ring (torus-shaped seal) with ID 37.75 mm / CS (cross section) 2.62  mm. Outer diameter (OD, for outer diameter) is therefore 42.99 mm.
Parameter Value Unit
inner diameter (ID) 37.75 mm
cross section (CS) 2.62 mm

O-ring STL file ID 20 × CS 2 mm (📦 #1020)

1 object(s) - format STL (5.0/5) 1 vote(s)
O-ring STL file ID 20 × CS 2 mm
3D model of O-ring (torus-shaped seal) with Inner diameter 20 mm × thickness 2  mm. External diameter (OD) is 24 mm.
Parameter Value Unit
inner diameter (ID) 20 mm
cross section (CS) 2 mm

O'ring STL file ID 17 × CS 1.5 mm (📦 #1559)

1 object(s) - format STL
o'ring STL file ID 17 × CS 1.5 mm
Model of sealing ring with Inner diameter (ID) 17 mm by CS (cross section) 1.5  mm. Final diameter is 20 mm.
Parameter Value Unit
inner diameter (ID) 17 mm
cross section (CS) 1.5 mm

O-ring STL file ID 17.8 × CS 1.8 mm (📦 #3317)

1 object(s) - format STL
O-ring STL file ID 17.8 × CS 1.8 mm
3D file in STL format of sealing ring with Inner diameter (ID) 17.8 mm × CS (cross section) 1.8  mm. Final diameter resulting is therefore 21.4 mm.
Parameter Value Unit
inner diameter (ID) 17.8 mm
cross section (CS) 1.8 mm

O-ring STL file ID 17.6 × CS 1.8 mm (📦 #1593)

1 object(s) - format STL
O-ring STL file ID 17.6 × CS 1.8 mm
File of O-ring with ID (inner diameter) 17.6 mm / thickness 1.8  mm. Outer diameter (OD) resulting is 21.2 mm.
Parameter Value Unit
inner diameter (ID) 17.6 mm
cross section (CS) 1.8 mm

O-ring STL file ID 25 × CS 2.4 mm (📦 #1390)

1 object(s) - format STL
O-ring STL file ID 25 × CS 2.4 mm
3D file in STL format of circular seal with dimensions Internal diameter (ID) 25 mm × CS 2.4  mm. The outer diameter corresponds to 29.8 mm.
Parameter Value Unit
inner diameter (ID) 25 mm
cross section (CS) 2.4 mm

O'ring STL file ID 16.5 × CS 1.7 mm (📦 #2884)

1 object(s) - format STL
o'ring STL file ID 16.5 × CS 1.7 mm
3D model in STL format of circular seal with dimensions Internal diameter 16.5 mm × section thickness 1.7  mm. The outer diameter corresponds to 19.9 mm.
Parameter Value Unit
inner diameter (ID) 16.5 mm
cross section (CS) 1.7 mm