Custom O-ring STL file ID 48 × CS 2 mm 📦#6105
Generation date: 2026-01-06
3D model download
Free- o-ring-ID48mm-CS2mm_model6105-_model6105-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 48 mm (≃1 7/8 in) |
| #2 | cross section (CS) | 2 mm (≃0.08 in) |
| Metadata | Value |
|---|---|
| outer diameter (OD) | 52 mm (≃2 1/16 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O-ring STL 3D file ID 45 × CS 2 mm (📦 #1675)
1 object(s) - format STL
STL file of O-ring with Internal diameter 45 mm × CS (cross section) 2 mm. Outer diameter (OD) is therefore 49 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 45 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 46.8 × CS 2.2 mm (📦 #4403)
1 object(s) - format STL
3D file of circular seal with ID 46.8 mm / CS 2.2 mm. Final diameter resulting corresponds to 51.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 46.8 | mm |
| cross section (CS) | 2.2 | mm |
O'ring STL 3D file ID 48 × CS 1.7 mm (📦 #2177)
1 object(s) - format STL
Model of O-ring (torus-shaped seal) with Inner diameter 48 mm by section thickness 1.7 mm. Outer diameter (OD) resulting is 51.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 48 | mm |
| cross section (CS) | 1.7 | mm |
O-ring STL 3D file ID 41.7 × CS 2 mm (📦 #2888)
1 object(s) - format STL
3D file of rubber ring with Inner diameter (ID) 41.7 mm by CS (cross section) 2 mm. The outer diameter resulting is therefore 45.7 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 41.7 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 42.4 × CS 2.2 mm (📦 #4249)
1 object(s) - format STL
Model of O-ring (torus-shaped seal) with dimensions ID (inner diameter) 42.4 mm × CS (cross section) 2.2 mm. Final diameter is 46.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 42.4 | mm |
| cross section (CS) | 2.2 | mm |
O-ring STL 3D file ID 40 × CS 2 mm (📦 #1054)
1 object(s) - format STL
STL file of sealing ring with Internal diameter (ID) 40 mm by CS 2 mm. External diameter (OD) resulting is therefore 44 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 40 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 49 × CS 2.5 mm (📦 #3308)
1 object(s) - format STL
Model of O-ring with dimensions ID (inner diameter) 49 mm × thickness 2.5 mm. Final diameter resulting is therefore 54 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 49 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL file ID 50 × CS 2.5 mm (📦 #1057)
1 object(s) - format STL
3D file in STL format of rubber ring with ID (inner diameter) 50 mm / thickness 2.5 mm. Outer diameter (OD) resulting corresponds to 55 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 50 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 45 × CS 1.5 mm (📦 #1343)
1 object(s) - format STL
3D file in STL format of O-ring with ID (inner diameter) 45 mm by section thickness 1.5 mm. Outer diameter (OD) corresponds to 48 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 45 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 52 × CS 2.5 mm (📦 #8722)
1 object(s) - format STL
3D model in STL format of circular seal with dimensions Internal diameter 52 mm / CS 2.5 mm. Outer diameter (OD) corresponds to 57 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 52 | mm |
| cross section (CS) | 2.5 | mm |
O'ring STL file ID 44 × CS 1.5 mm (📦 #3888)
1 object(s) - format STL
3D file in STL format of circular seal with dimensions ID 44 mm by thickness 1.5 mm. Outer diameter (OD, for outer diameter) is therefore 47 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 44 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 43 × CS 1.5 mm (📦 #3908)
1 object(s) - format STL
3D file in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 43 mm by section thickness 1.5 mm. Outer diameter (OD) is 46 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 43 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 60 × CS 2 mm (📦 #3666)
1 object(s) - format STL
3D file of circular seal with ID 60 mm by CS 2 mm. Outer diameter (OD, for outer diameter) resulting is therefore 64 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 60 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 36 × CS 2 mm (📦 #2163)
1 object(s) - format STL
File of O-ring with Internal diameter (ID) 36 mm × CS (cross section) 2 mm. Outer diameter (OD, for outer diameter) resulting is 40 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 61.5 × CS 2 mm (📦 #5143)
1 object(s) - format STL
File of sealing ring with Internal diameter (ID) 61.5 mm / CS (cross section) 2 mm. Outer diameter (OD) is therefore 65.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 61.5 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 34 × CS 2 mm (📦 #7277)
1 object(s) - format STL
3D file of circular seal with Internal diameter (ID) 34 mm / thickness 2 mm. Final diameter is 38 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 34 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 62 × CS 2 mm (📦 #3582)
1 object(s) - format STL
STL model of rubber ring with dimensions Inner diameter 62 mm × section thickness 2 mm. Final diameter resulting corresponds to 66 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 62 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 37.75 × CS 2.62 mm (📦 #1034)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with ID 37.75 mm / CS (cross section) 2.62 mm. Outer diameter (OD, for outer diameter) is therefore 42.99 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 37.75 | mm |
| cross section (CS) | 2.62 | mm |
O-ring STL 3D file ID 36.7 × CS 2.6 mm (📦 #1950)
1 object(s) - format STL
3D model in STL format of sealing ring with dimensions Inner diameter 36.7 mm / CS 2.6 mm. The outer diameter resulting is 41.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36.7 | mm |
| cross section (CS) | 2.6 | mm |
O'ring STL file ID 36.4 × CS 2.6 mm (📦 #1951)
1 object(s) - format STL
3D model of O-ring with Internal diameter 36.4 mm by CS 2.6 mm. External diameter (OD) resulting is 41.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36.4 | mm |
| cross section (CS) | 2.6 | mm |
O-ring STL 3D file ID 65 × CS 2 mm (📦 #8678)
1 object(s) - format STL
STL model of rubber ring with ID 65 mm / CS 2 mm. The outer diameter resulting corresponds to 69 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 65 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 35.5 × CS 2.6 mm (📦 #7757)
1 object(s) - format STL
3D model in STL format of circular seal with ID (inner diameter) 35.5 mm by CS (cross section) 2.6 mm. Final diameter is therefore 40.7 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 35.5 | mm |
| cross section (CS) | 2.6 | mm |
O-ring STL file ID 64 × CS 1.6 mm (📦 #8681)
1 object(s) - format STL
3D file in STL format of rubber ring with Internal diameter 64 mm by section thickness 1.6 mm. Outer diameter (OD) corresponds to 67.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 64 | mm |
| cross section (CS) | 1.6 | mm |
O-ring STL file ID 30 × CS 2 mm (📦 #1118)
1 object(s) - format STL (5.0/5) 1 vote(s)
File of circular seal with dimensions ID 30 mm / thickness 2 mm. Outer diameter (OD, for outer diameter) resulting corresponds to 34 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 30 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 68 × CS 2.2 mm (📦 #8675)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with ID 68 mm / thickness 2.2 mm. External diameter (OD) resulting is therefore 72.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 68 | mm |
| cross section (CS) | 2.2 | mm |
O-ring STL 3D file ID 48 × CS 1 mm (📦 #7961)
1 object(s) - format STL
File of rubber ring with dimensions Internal diameter 48 mm × CS 1 mm. Outer diameter (OD, for outer diameter) is therefore 50 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 48 | mm |
| cross section (CS) | 1 | mm |
O-ring STL file ID 47 × CS 3 mm (📦 #5147)
1 object(s) - format STL
File of O-ring with ID (inner diameter) 47 mm / CS 3 mm. The outer diameter is 53 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 47 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 50 × CS 3 mm (📦 #2430)
1 object(s) - format STL
3D model in STL format of sealing ring with dimensions ID 50 mm by CS (cross section) 3 mm. Outer diameter (OD) is therefore 56 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 50 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 44 × CS 3 mm (📦 #6659)
1 object(s) - format STL
STL model of O-ring with ID 44 mm / thickness 3 mm. Outer diameter (OD, for outer diameter) resulting is therefore 50 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 44 | mm |
| cross section (CS) | 3 | mm |