O-ring STL 3D file ID 30 × CS 2 mm 📦#1118
Generation date: 2025-06-27
3D model download
Free- o-ring-ID30mm-CS2mm_model1118-_model1118-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 30 mm |
| #2 | cross section (CS) | 2 mm |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O-ring STL 3D file ID 36 × CS 2 mm (📦 #2163)
1 object(s) - format STL
File of O-ring with Internal diameter (ID) 36 mm × CS (cross section) 2 mm. Outer diameter (OD, for outer diameter) resulting is 40 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 22 × CS 2 mm (📦 #1021)
1 object(s) - format STL
STL model of O-ring with ID 22 mm by CS 2 mm. External diameter (OD) is therefore 26 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 22 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 40 × CS 2 mm (📦 #1054)
1 object(s) - format STL
STL file of sealing ring with Internal diameter (ID) 40 mm by CS 2 mm. External diameter (OD) resulting is therefore 44 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 40 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 20 × CS 2 mm (📦 #1020)
1 object(s) - format STL (5.0/5) 1 vote(s)
3D model of O-ring (torus-shaped seal) with Inner diameter 20 mm × thickness 2 mm. External diameter (OD) is 24 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 20 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 25 × CS 2.4 mm (📦 #1390)
1 object(s) - format STL
3D file in STL format of circular seal with dimensions Internal diameter (ID) 25 mm × CS 2.4 mm. The outer diameter corresponds to 29.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 25 | mm |
| cross section (CS) | 2.4 | mm |
O-ring STL file ID 26 × CS 2.5 mm (📦 #1437)
1 object(s) - format STL
STL model of rubber ring with Internal diameter 26 mm / section thickness 2.5 mm. Final diameter is therefore 31 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 26 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 25 × CS 2.5 mm (📦 #1586)
1 object(s) - format STL
STL file of O-ring with Internal diameter 25 mm by CS (cross section) 2.5 mm. Outer diameter (OD) resulting is 30 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 25 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL file ID 17.6 × CS 1.8 mm (📦 #1593)
1 object(s) - format STL
File of O-ring with ID (inner diameter) 17.6 mm / thickness 1.8 mm. Outer diameter (OD) resulting is 21.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17.6 | mm |
| cross section (CS) | 1.8 | mm |
O-ring STL 3D file ID 16 × CS 2 mm (📦 #1945)
1 object(s) - format STL
File of circular seal with dimensions Internal diameter (ID) 16 mm / thickness 2 mm. Final diameter resulting corresponds to 20 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 16 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 16.5 × CS 1.8 mm (📦 #1594)
1 object(s) - format STL
STL model of rubber ring with dimensions ID (inner diameter) 16.5 mm by section thickness 1.8 mm. Outer diameter (OD, for outer diameter) corresponds to 20.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 16.5 | mm |
| cross section (CS) | 1.8 | mm |
O-ring STL 3D file ID 45 × CS 2 mm (📦 #1675)
1 object(s) - format STL
STL file of O-ring with Internal diameter 45 mm × CS (cross section) 2 mm. Outer diameter (OD) is therefore 49 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 45 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 20 × CS 2.5 mm (📦 #1030)
1 object(s) - format STL
3D model of sealing ring with dimensions Internal diameter 20 mm by section thickness 2.5 mm. External diameter (OD) resulting is 25 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 20 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 36.4 × CS 2.6 mm (📦 #1951)
1 object(s) - format STL
3D model of O-ring with Internal diameter 36.4 mm by CS 2.6 mm. External diameter (OD) resulting is 41.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36.4 | mm |
| cross section (CS) | 2.6 | mm |
O-ring STL 3D file ID 36.7 × CS 2.6 mm (📦 #1950)
1 object(s) - format STL
3D model in STL format of sealing ring with dimensions Inner diameter 36.7 mm / CS 2.6 mm. The outer diameter resulting is 41.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 36.7 | mm |
| cross section (CS) | 2.6 | mm |
O-ring STL file ID 14 × CS 1.8 mm (📦 #1638)
1 object(s) - format STL
File of O-ring (torus-shaped seal) with dimensions ID (inner diameter) 14 mm / section thickness 1.8 mm. The outer diameter corresponds to 17.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 14 | mm |
| cross section (CS) | 1.8 | mm |
O-ring STL 3D file ID 37.75 × CS 2.62 mm (📦 #1034)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with ID 37.75 mm / CS (cross section) 2.62 mm. Outer diameter (OD, for outer diameter) is therefore 42.99 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 37.75 | mm |
| cross section (CS) | 2.62 | mm |
O-ring STL 3D file ID 13 × CS 2 mm (📦 #1518)
1 object(s) - format STL
Model of sealing ring with Internal diameter (ID) 13 mm by section thickness 2 mm. External diameter (OD) resulting corresponds to 17 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 13 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 13 × CS 1.8 mm (📦 #2107)
1 object(s) - format STL
File of rubber ring with dimensions Internal diameter (ID) 13 mm × thickness 1.8 mm. Final diameter corresponds to 16.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 13 | mm |
| cross section (CS) | 1.8 | mm |
O-ring STL file ID 17 × CS 1.5 mm (📦 #1559)
1 object(s) - format STL
Model of sealing ring with Inner diameter (ID) 17 mm by CS (cross section) 1.5 mm. Final diameter is 20 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 17 × CS 2.5 mm (📦 #1019)
1 object(s) - format STL
File of rubber ring with ID (inner diameter) 17 mm / CS 2.5 mm. Outer diameter (OD) resulting corresponds to 22 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL file ID 12 × CS 2 mm (📦 #1017)
1 object(s) - format STL
STL model of circular seal with dimensions ID 12 mm / CS (cross section) 2 mm. Final diameter corresponds to 16 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 12.2 × CS 2.2 mm (📦 #1459)
1 object(s) - format STL
3D model of O-ring (torus-shaped seal) with dimensions Internal diameter 12.2 mm by section thickness 2.2 mm. The outer diameter is therefore 16.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12.2 | mm |
| cross section (CS) | 2.2 | mm |
O-ring STL file ID 16 × CS 1.5 mm (📦 #1560)
1 object(s) - format STL
3D file in STL format of circular seal with dimensions Inner diameter 16 mm by CS (cross section) 1.5 mm. Outer diameter (OD, for outer diameter) corresponds to 19 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 16 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 15 × CS 1.5 mm (📦 #1561)
1 object(s) - format STL
STL model of sealing ring with Inner diameter 15 mm / thickness 1.5 mm. The outer diameter resulting is therefore 18 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 15 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 45 × CS 1.5 mm (📦 #1343)
1 object(s) - format STL
3D file in STL format of O-ring with ID (inner diameter) 45 mm by section thickness 1.5 mm. Outer diameter (OD) corresponds to 48 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 45 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 15 × CS 2.5 mm (📦 #1018)
1 object(s) - format STL
3D model of rubber ring with Inner diameter (ID) 15 mm / thickness 2.5 mm. The outer diameter resulting corresponds to 20 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 15 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 48 × CS 1.7 mm (📦 #2177)
1 object(s) - format STL
Model of O-ring (torus-shaped seal) with Inner diameter 48 mm by section thickness 1.7 mm. Outer diameter (OD) resulting is 51.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 48 | mm |
| cross section (CS) | 1.7 | mm |
O-ring STL file ID 10 × CS 2 mm (📦 #1016)
1 object(s) - format STL (5.0/5) 1 vote(s)
3D file in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 10 mm by CS (cross section) 2 mm. Outer diameter (OD) corresponds to 14 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 10 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 14 × CS 2.5 mm (📦 #1038)
1 object(s) - format STL
Model of O-ring with ID (inner diameter) 14 mm / section thickness 2.5 mm. Outer diameter (OD) is therefore 19 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 14 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL file ID 24 × CS 2.8 mm (📦 #1389)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with dimensions ID 24 mm / CS (cross section) 2.8 mm. Final diameter resulting corresponds to 29.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 24 | mm |
| cross section (CS) | 2.8 | mm |