O-ring STL file ID 16 × CS 1.5 mm 📦#1560
Generation date: 2025-09-04
3D model download
Free- o-ring-ID16mm-CS1.5mm_model156_model1560-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 16 mm |
| #2 | cross section (CS) | 1.5 mm |
| Metadata | Value |
|---|---|
| outer diameter (OD) | 19 mm |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O-ring STL file ID 15.8 × CS 1.5 mm (📦 #2883)
1 object(s) - format STL
Model of circular seal with ID 15.8 mm × CS (cross section) 1.5 mm. The outer diameter resulting is 18.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 15.8 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 17 × CS 1.5 mm (📦 #1559)
1 object(s) - format STL
Model of sealing ring with Inner diameter (ID) 17 mm by CS (cross section) 1.5 mm. Final diameter is 20 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 15 × CS 1.5 mm (📦 #1561)
1 object(s) - format STL
STL model of sealing ring with Inner diameter 15 mm / thickness 1.5 mm. The outer diameter resulting is therefore 18 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 15 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 12 × CS 1.5 mm (📦 #1036)
1 object(s) - format STL
File of rubber ring with Inner diameter 12 mm × CS (cross section) 1.5 mm. Outer diameter (OD, for outer diameter) resulting is therefore 15 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 16.5 × CS 1.7 mm (📦 #2884)
1 object(s) - format STL
3D model in STL format of circular seal with dimensions Internal diameter 16.5 mm × section thickness 1.7 mm. The outer diameter corresponds to 19.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 16.5 | mm |
| cross section (CS) | 1.7 | mm |
O-ring STL 3D file ID 16.5 × CS 1.8 mm (📦 #1594)
1 object(s) - format STL
STL model of rubber ring with dimensions ID (inner diameter) 16.5 mm by section thickness 1.8 mm. Outer diameter (OD, for outer diameter) corresponds to 20.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 16.5 | mm |
| cross section (CS) | 1.8 | mm |
O-ring STL file ID 17.6 × CS 1.8 mm (📦 #1593)
1 object(s) - format STL
File of O-ring with ID (inner diameter) 17.6 mm / thickness 1.8 mm. Outer diameter (OD) resulting is 21.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17.6 | mm |
| cross section (CS) | 1.8 | mm |
O-ring STL file ID 14 × CS 1.8 mm (📦 #1638)
1 object(s) - format STL
File of O-ring (torus-shaped seal) with dimensions ID (inner diameter) 14 mm / section thickness 1.8 mm. The outer diameter corresponds to 17.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 14 | mm |
| cross section (CS) | 1.8 | mm |
O-ring STL 3D file ID 13 × CS 1.8 mm (📦 #2107)
1 object(s) - format STL
File of rubber ring with dimensions Internal diameter (ID) 13 mm × thickness 1.8 mm. Final diameter corresponds to 16.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 13 | mm |
| cross section (CS) | 1.8 | mm |
O-ring STL 3D file ID 7 × CS 1.5 mm (📦 #1039)
1 object(s) - format STL
3D file in STL format of O-ring with dimensions Internal diameter 7 mm / CS 1.5 mm. External diameter (OD) is therefore 10 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 7 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 5.1 × CS 1.6 mm (📦 #1565)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with Internal diameter 5.1 mm × thickness 1.6 mm. Outer diameter (OD) resulting is therefore 8.3 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 5.1 | mm |
| cross section (CS) | 1.6 | mm |
O-ring STL file ID 6.07 × CS 1.78 mm (📦 #1033)
1 object(s) - format STL
3D model of sealing ring with Internal diameter 6.07 mm by CS 1.78 mm. The outer diameter is 9.63 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 6.07 | mm |
| cross section (CS) | 1.78 | mm |
O-ring STL 3D file ID 16 × CS 2 mm (📦 #1945)
1 object(s) - format STL
File of circular seal with dimensions Internal diameter (ID) 16 mm / thickness 2 mm. Final diameter resulting corresponds to 20 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 16 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 17.8 × CS 2 mm (📦 #2739)
1 object(s) - format STL
3D file of sealing ring with ID 17.8 mm × CS 2 mm. Final diameter is 21.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17.8 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 13 × CS 2 mm (📦 #1518)
1 object(s) - format STL
Model of sealing ring with Internal diameter (ID) 13 mm by section thickness 2 mm. External diameter (OD) resulting corresponds to 17 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 13 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 13 × CS 1 mm (📦 #2106)
1 object(s) - format STL
STL model of rubber ring with ID 13 mm / thickness 1 mm. Final diameter resulting is therefore 15 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 13 | mm |
| cross section (CS) | 1 | mm |
O-ring STL 3D file ID 20 × CS 2 mm (📦 #1020)
1 object(s) - format STL (5.0/5) 1 vote(s)
3D model of O-ring (torus-shaped seal) with Inner diameter 20 mm × thickness 2 mm. External diameter (OD) is 24 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 20 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 12 × CS 1 mm (📦 #1576)
1 object(s) - format STL
3D file of O-ring with Internal diameter (ID) 12 mm × section thickness 1 mm. Final diameter resulting is therefore 14 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12 | mm |
| cross section (CS) | 1 | mm |
O-ring STL file ID 12 × CS 2 mm (📦 #1017)
1 object(s) - format STL
STL model of circular seal with dimensions ID 12 mm / CS (cross section) 2 mm. Final diameter corresponds to 16 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 3 × CS 1.5 mm (📦 #1041)
1 object(s) - format STL
Model of rubber ring with Internal diameter (ID) 3 mm / section thickness 1.5 mm. The outer diameter resulting corresponds to 6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 3 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 4.47 × CS 1.78 mm (📦 #1037)
1 object(s) - format STL (5.0/5) 1 vote(s)
File of circular seal with dimensions ID (inner diameter) 4.47 mm × section thickness 1.78 mm. Final diameter is therefore 8.03 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 4.47 | mm |
| cross section (CS) | 1.78 | mm |
O-ring STL file ID 10 × CS 2 mm (📦 #1016)
1 object(s) - format STL (5.0/5) 1 vote(s)
3D file in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 10 mm by CS (cross section) 2 mm. Outer diameter (OD) corresponds to 14 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 10 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 22 × CS 2 mm (📦 #1021)
1 object(s) - format STL
STL model of O-ring with ID 22 mm by CS 2 mm. External diameter (OD) is therefore 26 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 22 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 23 × CS 2 mm (📦 #2588)
1 object(s) - format STL
File of O-ring with ID 23 mm × CS (cross section) 2 mm. The outer diameter is 27 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 23 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 9 × CS 2 mm (📦 #2327)
1 object(s) - format STL
STL model of O-ring with Internal diameter (ID) 9 mm by thickness 2 mm. Final diameter resulting is therefore 13 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 9 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 8 × CS 2 mm (📦 #2362)
1 object(s) - format STL
3D file of sealing ring with dimensions Inner diameter 8 mm / thickness 2 mm. Outer diameter (OD, for outer diameter) resulting corresponds to 12 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 8 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 24 × CS 2 mm (📦 #2587)
1 object(s) - format STL
Model of circular seal with Inner diameter 24 mm / CS 2 mm. Final diameter resulting is 28 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 24 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 25 × CS 2 mm (📦 #2571)
1 object(s) - format STL
STL file of rubber ring with dimensions Inner diameter (ID) 25 mm / thickness 2 mm. Outer diameter (OD) corresponds to 29 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 25 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 7 × CS 2 mm (📦 #1015)
1 object(s) - format STL
Model of rubber ring with dimensions Inner diameter 7 mm × thickness 2 mm. Final diameter resulting is therefore 11 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 7 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 5.2 × CS 2 mm (📦 #1056)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with Internal diameter 5.2 mm / CS 2 mm. Final diameter resulting corresponds to 9.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 5.2 | mm |
| cross section (CS) | 2 | mm |