?>

O-ring STL 3D file ID 13 × CS 1.8 mm 📦#2107

STL Download STL
Create a new model:
from scratch search for a model
File of rubber ring with dimensions Internal diameter (ID) 13 mm × thickness 1.8  mm. Final diameter corresponds to 16.6 mm.
Generation date: 2025-09-30
3D Model O-ring STL 3D file ID 13 × CS 1.8 mm

3D model download

Free
  • o-ring-ID13mm-CS1.8mm_model210_model2107-nb0_dd{id}.stl : 1.5 Mo
STL Mesh quality : not defined
No compliance warranty No compliance warranty
(no copyright - public domain)
Safe download

Values for this model

This model was generated by the O-ring template, with the following values:
Parameter Value
#1 inner diameter (ID) 13 mm
#2 cross section (CS) 1.8 mm
illustration of the parameters
Representation of the parameters

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 inner diameter (ID) ID
#2 cross section (CS) CS

Related 3D models

To search for a model based on your own parameters, go to the template page O-ring 

O-ring STL file ID 14 × CS 1.8 mm (📦 #1638)

1 object(s) - format STL
O-ring STL file ID 14 × CS 1.8 mm
File of O-ring (torus-shaped seal) with dimensions ID (inner diameter) 14 mm / section thickness 1.8  mm. The outer diameter corresponds to 17.6 mm.
Parameter Value Unit
inner diameter (ID) 14 mm
cross section (CS) 1.8 mm

O-ring STL 3D file ID 16.5 × CS 1.8 mm (📦 #1594)

1 object(s) - format STL
O-ring STL 3D file ID 16.5 × CS 1.8 mm
STL model of rubber ring with dimensions ID (inner diameter) 16.5 mm by section thickness 1.8  mm. Outer diameter (OD, for outer diameter) corresponds to 20.1 mm.
Parameter Value Unit
inner diameter (ID) 16.5 mm
cross section (CS) 1.8 mm

O-ring STL file ID 17.6 × CS 1.8 mm (📦 #1593)

1 object(s) - format STL
O-ring STL file ID 17.6 × CS 1.8 mm
File of O-ring with ID (inner diameter) 17.6 mm / thickness 1.8  mm. Outer diameter (OD) resulting is 21.2 mm.
Parameter Value Unit
inner diameter (ID) 17.6 mm
cross section (CS) 1.8 mm

O-ring STL 3D file ID 13 × CS 2 mm (📦 #1518)

1 object(s) - format STL
O-ring STL 3D file ID 13 × CS 2 mm
Model of sealing ring with Internal diameter (ID) 13 mm by section thickness 2  mm. External diameter (OD) resulting corresponds to 17 mm.
Parameter Value Unit
inner diameter (ID) 13 mm
cross section (CS) 2 mm

O-ring STL file ID 12 × CS 2 mm (📦 #1017)

1 object(s) - format STL
O-ring STL file ID 12 × CS 2 mm
STL model of circular seal with dimensions ID 12 mm / CS (cross section) 2  mm. Final diameter corresponds to 16 mm.
Parameter Value Unit
inner diameter (ID) 12 mm
cross section (CS) 2 mm

O-ring STL file ID 10 × CS 2 mm (📦 #1016)

1 object(s) - format STL (5.0/5) 1 vote(s)
O-ring STL file ID 10 × CS 2 mm
3D file in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 10 mm by CS (cross section) 2  mm. Outer diameter (OD) corresponds to 14 mm.
Parameter Value Unit
inner diameter (ID) 10 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 16 × CS 2 mm (📦 #1945)

1 object(s) - format STL
O-ring STL 3D file ID 16 × CS 2 mm
File of circular seal with dimensions Internal diameter (ID) 16 mm / thickness 2  mm. Final diameter resulting corresponds to 20 mm.
Parameter Value Unit
inner diameter (ID) 16 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 9 × CS 2 mm (📦 #2327)

1 object(s) - format STL
O-ring STL 3D file ID 9 × CS 2 mm
STL model of O-ring with Internal diameter (ID) 9 mm by thickness 2  mm. Final diameter resulting is therefore 13 mm.
Parameter Value Unit
inner diameter (ID) 9 mm
cross section (CS) 2 mm

O-ring STL file ID 6.07 × CS 1.78 mm (📦 #1033)

1 object(s) - format STL
O-ring STL file ID 6.07 × CS 1.78 mm
3D model of sealing ring with Internal diameter 6.07 mm by CS 1.78  mm. The outer diameter is 9.63 mm.
Parameter Value Unit
inner diameter (ID) 6.07 mm
cross section (CS) 1.78 mm

O-ring STL file ID 8 × CS 2 mm (📦 #2362)

1 object(s) - format STL
O-ring STL file ID 8 × CS 2 mm
3D file of sealing ring with dimensions Inner diameter 8 mm / thickness 2  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 12 mm.
Parameter Value Unit
inner diameter (ID) 8 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 12 × CS 1.5 mm (📦 #1036)

1 object(s) - format STL
O-ring STL 3D file ID 12 × CS 1.5 mm
File of rubber ring with Inner diameter 12 mm × CS (cross section) 1.5  mm. Outer diameter (OD, for outer diameter) resulting is therefore 15 mm.
Parameter Value Unit
inner diameter (ID) 12 mm
cross section (CS) 1.5 mm

O-ring STL file ID 15 × CS 1.5 mm (📦 #1561)

1 object(s) - format STL
O-ring STL file ID 15 × CS 1.5 mm
STL model of sealing ring with Inner diameter 15 mm / thickness 1.5  mm. The outer diameter resulting is therefore 18 mm.
Parameter Value Unit
inner diameter (ID) 15 mm
cross section (CS) 1.5 mm

O-ring STL file ID 7 × CS 2 mm (📦 #1015)

1 object(s) - format STL
O-ring STL file ID 7 × CS 2 mm
Model of rubber ring with dimensions Inner diameter 7 mm × thickness 2  mm. Final diameter resulting is therefore 11 mm.
Parameter Value Unit
inner diameter (ID) 7 mm
cross section (CS) 2 mm

O-ring STL file ID 16 × CS 1.5 mm (📦 #1560)

1 object(s) - format STL
O-ring STL file ID 16 × CS 1.5 mm
3D file in STL format of circular seal with dimensions Inner diameter 16 mm by CS (cross section) 1.5  mm. Outer diameter (OD, for outer diameter) corresponds to 19 mm.
Parameter Value Unit
inner diameter (ID) 16 mm
cross section (CS) 1.5 mm

O-ring STL file ID 17 × CS 1.5 mm (📦 #1559)

1 object(s) - format STL
O-ring STL file ID 17 × CS 1.5 mm
Model of sealing ring with Inner diameter (ID) 17 mm by CS (cross section) 1.5  mm. Final diameter is 20 mm.
Parameter Value Unit
inner diameter (ID) 17 mm
cross section (CS) 1.5 mm

O-ring STL 3D file ID 20 × CS 2 mm (📦 #1020)

1 object(s) - format STL (5.0/5) 1 vote(s)
O-ring STL 3D file ID 20 × CS 2 mm
3D model of O-ring (torus-shaped seal) with Inner diameter 20 mm × thickness 2  mm. External diameter (OD) is 24 mm.
Parameter Value Unit
inner diameter (ID) 20 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 4.47 × CS 1.78 mm (📦 #1037)

1 object(s) - format STL (5.0/5) 1 vote(s)
O-ring STL 3D file ID 4.47 × CS 1.78 mm
File of circular seal with dimensions ID (inner diameter) 4.47 mm × section thickness 1.78  mm. Final diameter is therefore 8.03 mm.
Parameter Value Unit
inner diameter (ID) 4.47 mm
cross section (CS) 1.78 mm

O-ring STL file ID 5.2 × CS 2 mm (📦 #1056)

1 object(s) - format STL
O-ring STL file ID 5.2 × CS 2 mm
3D file of O-ring (torus-shaped seal) with Internal diameter 5.2 mm / CS 2 mm. Final diameter resulting corresponds to 9.2 mm.
Parameter Value Unit
inner diameter (ID) 5.2 mm
cross section (CS) 2 mm

O-ring STL file ID 5.1 × CS 1.6 mm (📦 #1565)

1 object(s) - format STL
O-ring STL file ID 5.1 × CS 1.6 mm
STL file of O-ring (torus-shaped seal) with Internal diameter 5.1 mm × thickness 1.6  mm. Outer diameter (OD) resulting is therefore 8.3 mm.
Parameter Value Unit
inner diameter (ID) 5.1 mm
cross section (CS) 1.6 mm

O-ring STL 3D file ID 5 × CS 2 mm (📦 #1035)

1 object(s) - format STL
O-ring STL 3D file ID 5 × CS 2 mm
3D file in STL format of circular seal with dimensions Internal diameter 5 mm × CS 2  mm. Outer diameter (OD, for outer diameter) resulting is therefore 9 mm.
Parameter Value Unit
inner diameter (ID) 5 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 7 × CS 1.5 mm (📦 #1039)

1 object(s) - format STL
O-ring STL 3D file ID 7 × CS 1.5 mm
3D file in STL format of O-ring with dimensions Internal diameter 7 mm / CS 1.5  mm. External diameter (OD) is therefore 10 mm.
Parameter Value Unit
inner diameter (ID) 7 mm
cross section (CS) 1.5 mm

O-ring STL 3D file ID 12.2 × CS 2.2 mm (📦 #1459)

1 object(s) - format STL
O-ring STL 3D file ID 12.2 × CS 2.2 mm
3D model of O-ring (torus-shaped seal) with dimensions Internal diameter 12.2 mm by section thickness 2.2  mm. The outer diameter is therefore 16.6 mm.
Parameter Value Unit
inner diameter (ID) 12.2 mm
cross section (CS) 2.2 mm

O-ring STL file ID 22 × CS 2 mm (📦 #1021)

1 object(s) - format STL
O-ring STL file ID 22 × CS 2 mm
STL model of O-ring with ID 22 mm by CS 2  mm. External diameter (OD) is therefore 26 mm.
Parameter Value Unit
inner diameter (ID) 22 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 3 × CS 1.5 mm (📦 #1041)

1 object(s) - format STL
O-ring STL 3D file ID 3 × CS 1.5 mm
Model of rubber ring with Internal diameter (ID) 3 mm / section thickness 1.5  mm. The outer diameter resulting corresponds to 6 mm.
Parameter Value Unit
inner diameter (ID) 3 mm
cross section (CS) 1.5 mm

O-ring STL file ID 5.3 × CS 2.4 mm (📦 #1014)

1 object(s) - format STL
O-ring STL file ID 5.3 × CS 2.4 mm
File of O-ring with dimensions ID (inner diameter) 5.3 mm / section thickness 2.4  mm. Outer diameter (OD) is 10.1 mm.
Parameter Value Unit
inner diameter (ID) 5.3 mm
cross section (CS) 2.4 mm

O-ring STL file ID 14 × CS 2.5 mm (📦 #1038)

1 object(s) - format STL
O-ring STL file ID 14 × CS 2.5 mm
Model of O-ring with ID (inner diameter) 14 mm / section thickness 2.5  mm. Outer diameter (OD) is therefore 19 mm.
Parameter Value Unit
inner diameter (ID) 14 mm
cross section (CS) 2.5 mm

O-ring STL file ID 11.8 × CS 2.5 mm (📦 #1922)

1 object(s) - format STL
O-ring STL file ID 11.8 × CS 2.5 mm
Model of O-ring with dimensions Inner diameter 11.8 mm × thickness 2.5  mm. Final diameter resulting is 16.8 mm.
Parameter Value Unit
inner diameter (ID) 11.8 mm
cross section (CS) 2.5 mm

O-ring STL file ID 15 × CS 2.5 mm (📦 #1018)

1 object(s) - format STL
O-ring STL file ID 15 × CS 2.5 mm
3D model of rubber ring with Inner diameter (ID) 15 mm / thickness 2.5  mm. The outer diameter resulting corresponds to 20 mm.
Parameter Value Unit
inner diameter (ID) 15 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 10 × CS 2.5 mm (📦 #1040)

1 object(s) - format STL
O-ring STL 3D file ID 10 × CS 2.5 mm
File of O-ring (torus-shaped seal) with ID (inner diameter) 10 mm / CS 2.5  mm. Outer diameter (OD) resulting is therefore 15 mm.
Parameter Value Unit
inner diameter (ID) 10 mm
cross section (CS) 2.5 mm

O-ring STL file ID 17 × CS 2.5 mm (📦 #1019)

1 object(s) - format STL
O-ring STL file ID 17 × CS 2.5 mm
File of rubber ring with ID (inner diameter) 17 mm / CS 2.5  mm. Outer diameter (OD) resulting corresponds to 22 mm.
Parameter Value Unit
inner diameter (ID) 17 mm
cross section (CS) 2.5 mm