?>

O-ring STL file ID 54 × CS 3 mm 📦#1806

STL Download STL
Create a new model:
from scratch search for a model
Model of O-ring (torus-shaped seal) with Internal diameter 54 mm by CS 3  mm. The outer diameter resulting is 60 mm.
Generation date: 2025-09-15
3D Model O-ring STL file ID 54 × CS 3 mm

3D model download

Free
  • o-ring-ID54mm-CS3mm_model1806-_model1806-nb0_dd{id}.stl : 1.5 Mo
STL Mesh quality : not defined
No compliance warranty No compliance warranty
(no copyright - public domain)
Safe download

Values for this model

This model was generated by the O-ring template, with the following values:
Parameter Value
#1 inner diameter (ID) 54 mm
#2 cross section (CS) 3 mm
Metadata Value
outer diameter (OD) 60 mm
illustration of the parameters
Representation of the parameters

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 inner diameter (ID) ID
#2 cross section (CS) CS

Related 3D models

To search for a model based on your own parameters, go to the template page O-ring 

O-ring STL 3D file ID 50 × CS 3 mm (📦 #2430)

1 object(s) - format STL
O-ring STL 3D file ID 50 × CS 3 mm
3D model in STL format of sealing ring with dimensions ID 50 mm by CS (cross section) 3  mm. Outer diameter (OD) is therefore 56 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 50 × CS 2.5 mm (📦 #1057)

1 object(s) - format STL
O-ring STL 3D file ID 50 × CS 2.5 mm
3D file in STL format of rubber ring with ID (inner diameter) 50 mm / thickness 2.5 mm. Outer diameter (OD) resulting corresponds to 55 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 42 × CS 3.5 mm (📦 #2201)

1 object(s) - format STL
O-ring STL 3D file ID 42 × CS 3.5 mm
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 42 mm by CS (cross section) 3.5  mm. The outer diameter resulting corresponds to 49 mm.
Parameter Value Unit
inner diameter (ID) 42 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 37.75 × CS 2.62 mm (📦 #1034)

1 object(s) - format STL
O-ring STL 3D file ID 37.75 × CS 2.62 mm
3D file of O-ring (torus-shaped seal) with ID 37.75 mm / CS (cross section) 2.62  mm. Outer diameter (OD, for outer diameter) is therefore 42.99 mm.
Parameter Value Unit
inner diameter (ID) 37.75 mm
cross section (CS) 2.62 mm

O-ring STL 3D file ID 42 × CS 3.6 mm (📦 #2226)

1 object(s) - format STL
O-ring STL 3D file ID 42 × CS 3.6 mm
3D model of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 42 mm × CS (cross section) 3.6  mm. Outer diameter (OD, for outer diameter) resulting is therefore 49.2 mm.
Parameter Value Unit
inner diameter (ID) 42 mm
cross section (CS) 3.6 mm

O-ring STL 3D file ID 36.7 × CS 2.6 mm (📦 #1950)

1 object(s) - format STL
O-ring STL 3D file ID 36.7 × CS 2.6 mm
3D model in STL format of sealing ring with dimensions Inner diameter 36.7 mm / CS 2.6  mm. The outer diameter resulting is 41.9 mm.
Parameter Value Unit
inner diameter (ID) 36.7 mm
cross section (CS) 2.6 mm

O-ring STL file ID 70 × CS 3.5 mm (📦 #1336)

1 object(s) - format STL
O-ring STL file ID 70 × CS 3.5 mm
3D file in STL format of rubber ring with dimensions Inner diameter 70 mm × CS 3.5  mm. The outer diameter resulting is 77 mm.
Parameter Value Unit
inner diameter (ID) 70 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 36.4 × CS 2.6 mm (📦 #1951)

1 object(s) - format STL
O-ring STL 3D file ID 36.4 × CS 2.6 mm
3D model of O-ring with Internal diameter 36.4 mm by CS 2.6  mm. External diameter (OD) resulting is 41.6 mm.
Parameter Value Unit
inner diameter (ID) 36.4 mm
cross section (CS) 2.6 mm

O-ring STL 3D file ID 72.4 × CS 2.6 mm (📦 #2004)

1 object(s) - format STL
O-ring STL 3D file ID 72.4 × CS 2.6 mm
3D file in STL format of sealing ring with Internal diameter 72.4 mm by thickness 2.6  mm. External diameter (OD) corresponds to 77.6 mm.
Parameter Value Unit
inner diameter (ID) 72.4 mm
cross section (CS) 2.6 mm

O-ring STL 3D file ID 36 × CS 3.5 mm (📦 #2203)

1 object(s) - format STL
O-ring STL 3D file ID 36 × CS 3.5 mm
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 36 mm / CS (cross section) 3.5  mm. Outer diameter (OD, for outer diameter) corresponds to 43 mm.
Parameter Value Unit
inner diameter (ID) 36 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 36 × CS 3.6 mm (📦 #2227)

1 object(s) - format STL
O-ring STL 3D file ID 36 × CS 3.6 mm
STL file of O-ring (torus-shaped seal) with ID 36 mm × CS (cross section) 3.6  mm. Final diameter corresponds to 43.2 mm.
Parameter Value Unit
inner diameter (ID) 36 mm
cross section (CS) 3.6 mm

O-ring STL file ID 30 × CS 3 mm (📦 #1047)

1 object(s) - format STL
O-ring STL file ID 30 × CS 3 mm
STL model of circular seal with dimensions ID (inner diameter) 30 mm × section thickness 3  mm. The outer diameter is therefore 36 mm.
Parameter Value Unit
inner diameter (ID) 30 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 45 × CS 2 mm (📦 #1675)

1 object(s) - format STL
O-ring STL 3D file ID 45 × CS 2 mm
STL file of O-ring with Internal diameter 45 mm × CS (cross section) 2  mm. Outer diameter (OD) is therefore 49 mm.
Parameter Value Unit
inner diameter (ID) 45 mm
cross section (CS) 2 mm

O-ring STL file ID 31 × CS 3.5 mm (📦 #1579)

1 object(s) - format STL
O-ring STL file ID 31 × CS 3.5 mm
STL model of rubber ring with Internal diameter 31 mm × CS 3.5  mm. External diameter (OD) resulting corresponds to 38 mm.
Parameter Value Unit
inner diameter (ID) 31 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 42 × CS 4 mm (📦 #1500)

1 object(s) - format STL
O-ring STL 3D file ID 42 × CS 4 mm
3D file in STL format of sealing ring with ID (inner diameter) 42 mm / CS (cross section) 4  mm. External diameter (OD) is therefore 50 mm.
Parameter Value Unit
inner diameter (ID) 42 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 27 × CS 3 mm (📦 #2782)

1 object(s) - format STL
O-ring STL 3D file ID 27 × CS 3 mm
3D file in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter 27 mm / section thickness 3  mm. External diameter (OD) resulting is 33 mm.
Parameter Value Unit
inner diameter (ID) 27 mm
cross section (CS) 3 mm

O-ring STL file ID 41.7 × CS 2 mm (📦 #2888)

1 object(s) - format STL
O-ring STL file ID 41.7 × CS 2 mm
3D file of rubber ring with Inner diameter (ID) 41.7 mm by CS (cross section) 2  mm. The outer diameter resulting is therefore 45.7 mm.
Parameter Value Unit
inner diameter (ID) 41.7 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 30.5 × CS 3.6 mm (📦 #1503)

1 object(s) - format STL
O-ring STL 3D file ID 30.5 × CS 3.6 mm
3D file in STL format of sealing ring with dimensions ID (inner diameter) 30.5 mm × CS (cross section) 3.6  mm. Outer diameter (OD) resulting corresponds to 37.7 mm.
Parameter Value Unit
inner diameter (ID) 30.5 mm
cross section (CS) 3.6 mm

O-ring STL file ID 40 × CS 2 mm (📦 #1054)

1 object(s) - format STL
O-ring STL file ID 40 × CS 2 mm
STL file of sealing ring with Internal diameter (ID) 40 mm by CS 2  mm. External diameter (OD) resulting is therefore 44 mm.
Parameter Value Unit
inner diameter (ID) 40 mm
cross section (CS) 2 mm

O-ring STL file ID 40 × CS 4 mm (📦 #1055)

1 object(s) - format STL
O-ring STL file ID 40 × CS 4 mm
STL file of O-ring with dimensions ID (inner diameter) 40 mm / section thickness 4 mm. The outer diameter resulting is 48 mm.
Parameter Value Unit
inner diameter (ID) 40 mm
cross section (CS) 4 mm

O-ring STL file ID 26 × CS 3 mm (📦 #1022)

1 object(s) - format STL
O-ring STL file ID 26 × CS 3 mm
3D file of rubber ring with dimensions ID 26 mm × thickness 3  mm. The outer diameter resulting is therefore 32 mm.
Parameter Value Unit
inner diameter (ID) 26 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 28.5 × CS 3.5 mm (📦 #1581)

1 object(s) - format STL
O-ring STL 3D file ID 28.5 × CS 3.5 mm
STL file of rubber ring with dimensions ID (inner diameter) 28.5 mm by CS (cross section) 3.5  mm. Outer diameter (OD) resulting is 35.5 mm.
Parameter Value Unit
inner diameter (ID) 28.5 mm
cross section (CS) 3.5 mm

O-ring STL file ID 80 × CS 2.5 mm (📦 #1348)

1 object(s) - format STL
O-ring STL file ID 80 × CS 2.5 mm
3D model of O-ring (torus-shaped seal) with ID (inner diameter) 80 mm × CS 2.5  mm. Outer diameter (OD) is therefore 85 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 2.5 mm

O-ring STL file ID 70 × CS 4 mm (📦 #1681)

1 object(s) - format STL
O-ring STL file ID 70 × CS 4 mm
STL file of sealing ring with dimensions Internal diameter 70 mm / CS 4  mm. External diameter (OD) is therefore 78 mm.
Parameter Value Unit
inner diameter (ID) 70 mm
cross section (CS) 4 mm

O-ring STL file ID 25 × CS 3 mm (📦 #1045)

1 object(s) - format STL
O-ring STL file ID 25 × CS 3 mm
Model of O-ring with dimensions ID (inner diameter) 25 mm / thickness 3  mm. External diameter (OD) resulting corresponds to 31 mm.
Parameter Value Unit
inner diameter (ID) 25 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 84 × CS 3 mm (📦 #1807)

1 object(s) - format STL
O-ring STL 3D file ID 84 × CS 3 mm
File of sealing ring with dimensions Inner diameter 84 mm / CS 3  mm. Final diameter corresponds to 90 mm.
Parameter Value Unit
inner diameter (ID) 84 mm
cross section (CS) 3 mm

O-ring STL file ID 24 × CS 3 mm (📦 #1046)

1 object(s) - format STL (5.0/5) 1 vote(s)
O-ring STL file ID 24 × CS 3 mm
3D model of rubber ring with Inner diameter 24 mm × CS 3  mm. Outer diameter (OD) corresponds to 30 mm.
Parameter Value Unit
inner diameter (ID) 24 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 36 × CS 2 mm (📦 #2163)

1 object(s) - format STL
O-ring STL 3D file ID 36 × CS 2 mm
File of O-ring with Internal diameter (ID) 36 mm × CS (cross section) 2  mm. Outer diameter (OD, for outer diameter) resulting is 40 mm.
Parameter Value Unit
inner diameter (ID) 36 mm
cross section (CS) 2 mm

O-ring STL file ID 24 × CS 2.8 mm (📦 #1389)

1 object(s) - format STL
O-ring STL file ID 24 × CS 2.8 mm
3D file of O-ring (torus-shaped seal) with dimensions ID 24 mm / CS (cross section) 2.8  mm. Final diameter resulting corresponds to 29.6 mm.
Parameter Value Unit
inner diameter (ID) 24 mm
cross section (CS) 2.8 mm

O-ring STL file ID 26 × CS 2.5 mm (📦 #1437)

1 object(s) - format STL
O-ring STL file ID 26 × CS 2.5 mm
STL model of rubber ring with Internal diameter 26 mm / section thickness 2.5  mm. Final diameter is therefore 31 mm.
Parameter Value Unit
inner diameter (ID) 26 mm
cross section (CS) 2.5 mm