Custom O-ring STL file ID 78.5 × CS 5.8 mm 📦#3251
Generation date: 2025-11-13
3D model download
Free- o-ring-ID78.5mm-CS5.8mm_model3_model3251-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 78.5 mm (≃3.09 in) |
| #2 | cross section (CS) | 5.8 mm (≃0.23 in) |
| Metadata | Value |
|---|---|
| outer diameter (OD) | 90.1 mm (≃3 9/16 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O-ring STL 3D file ID 78 × CS 6 mm (📦 #1821)
1 object(s) - format STL
3D model in STL format of sealing ring with dimensions Internal diameter 78 mm by section thickness 6 mm. External diameter (OD) resulting corresponds to 90 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 78 | mm |
| cross section (CS) | 6 | mm |
O-ring STL 3D file ID 80 × CS 6 mm (📦 #2636)
1 object(s) - format STL
STL file of rubber ring with dimensions Inner diameter (ID) 80 mm × CS (cross section) 6 mm. External diameter (OD) resulting is 92 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 80 | mm |
| cross section (CS) | 6 | mm |
O'ring STL file ID 80 × CS 5.3 mm (📦 #3247)
1 object(s) - format STL
Model of O-ring with dimensions Inner diameter (ID) 80 mm × section thickness 5.3 mm. External diameter (OD) is 90.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 80 | mm |
| cross section (CS) | 5.3 | mm |
O-ring STL 3D file ID 75 × CS 5.3 mm (📦 #3246)
1 object(s) - format STL
STL file of rubber ring with Internal diameter 75 mm × thickness 5.3 mm. Outer diameter (OD) is therefore 85.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 75 | mm |
| cross section (CS) | 5.3 | mm |
O-ring STL 3D file ID 80 × CS 5 mm (📦 #1547)
1 object(s) - format STL
File of rubber ring with Internal diameter (ID) 80 mm by thickness 5 mm. Final diameter resulting is therefore 90 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 80 | mm |
| cross section (CS) | 5 | mm |
O-ring STL 3D file ID 88.9 × CS 5 mm (📦 #3281)
1 object(s) - format STL
3D file in STL format of circular seal with dimensions ID 88.9 mm by CS 5 mm. External diameter (OD) resulting corresponds to 98.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 88.9 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 96 × CS 5.3 mm (📦 #3088)
1 object(s) - format STL
Model of rubber ring with Internal diameter 96 mm / thickness 5.3 mm. External diameter (OD) is 106.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 96 | mm |
| cross section (CS) | 5.3 | mm |
O-ring STL 3D file ID 90 × CS 5 mm (📦 #2677)
1 object(s) - format STL
3D model of rubber ring with Inner diameter 90 mm by CS (cross section) 5 mm. Outer diameter (OD) resulting corresponds to 100 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 90 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 100 × CS 5 mm (📦 #1171)
1 object(s) - format STL
Model of rubber ring with dimensions ID (inner diameter) 100 mm / thickness 5 mm. Outer diameter (OD, for outer diameter) resulting is 110 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 100 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 67 × CS 7 mm (📦 #1995)
1 object(s) - format STL
File of O-ring (torus-shaped seal) with dimensions Inner diameter 67 mm by CS (cross section) 7 mm. Outer diameter (OD) resulting corresponds to 81 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 67 | mm |
| cross section (CS) | 7 | mm |
O'ring STL 3D file ID 49 × CS 5.8 mm (📦 #3252)
1 object(s) - format STL
STL file of circular seal with dimensions ID (inner diameter) 49 mm / CS 5.8 mm. Outer diameter (OD) is therefore 60.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 49 | mm |
| cross section (CS) | 5.8 | mm |
O-ring STL 3D file ID 50 × CS 5.3 mm (📦 #3248)
1 object(s) - format STL
3D file in STL format of circular seal with ID (inner diameter) 50 mm × CS 5.3 mm. Outer diameter (OD, for outer diameter) is therefore 60.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 50 | mm |
| cross section (CS) | 5.3 | mm |
O-ring STL file ID 60 × CS 7 mm (📦 #1598)
1 object(s) - format STL
Model of rubber ring with dimensions Internal diameter (ID) 60 mm × CS (cross section) 7 mm. Final diameter resulting is therefore 74 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 60 | mm |
| cross section (CS) | 7 | mm |
O-ring STL 3D file ID 50 × CS 5 mm (📦 #1595)
1 object(s) - format STL
Model of circular seal with ID (inner diameter) 50 mm / thickness 5 mm. Final diameter corresponds to 60 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 50 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 48 × CS 5 mm (📦 #1373)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 48 mm × thickness 5 mm. External diameter (OD) resulting is 58 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 48 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 43.8 × CS 5.4 mm (📦 #1935)
1 object(s) - format STL
3D model of rubber ring with dimensions ID 43.8 mm × section thickness 5.4 mm. Final diameter is therefore 54.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 43.8 | mm |
| cross section (CS) | 5.4 | mm |
O-ring STL 3D file ID 45 × CS 5 mm (📦 #1212)
1 object(s) - format STL
3D model of sealing ring with dimensions ID (inner diameter) 45 mm by thickness 5 mm. The outer diameter is 55 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 45 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 40 × CS 6 mm (📦 #1051)
1 object(s) - format STL
3D model in STL format of O-ring with dimensions Inner diameter 40 mm × thickness 6 mm. The outer diameter is therefore 52 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 40 | mm |
| cross section (CS) | 6 | mm |
O-ring STL 3D file ID 70 × CS 4 mm (📦 #1681)
1 object(s) - format STL
STL file of sealing ring with dimensions Internal diameter 70 mm / CS 4 mm. External diameter (OD) is therefore 78 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 70 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 90 × CS 4 mm (📦 #2183)
1 object(s) - format STL
STL model of O-ring (torus-shaped seal) with Internal diameter 90 mm by CS 4 mm. Outer diameter (OD, for outer diameter) is 98 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 90 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 91 × CS 4 mm (📦 #2989)
1 object(s) - format STL
STL file of sealing ring with Internal diameter (ID) 91 mm by CS (cross section) 4 mm. Outer diameter (OD) resulting is therefore 99 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 91 | mm |
| cross section (CS) | 4 | mm |
O'ring STL file ID 66 × CS 4 mm (📦 #3609)
1 object(s) - format STL
STL model of sealing ring with ID (inner diameter) 66 mm × CS (cross section) 4 mm. The outer diameter corresponds to 74 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 66 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 73.2 × CS 7.7 mm (📦 #2089)
1 object(s) - format STL
3D file of O-ring with dimensions Inner diameter (ID) 73.2 mm × thickness 7.7 mm. Outer diameter (OD) resulting is therefore 88.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 73.2 | mm |
| cross section (CS) | 7.7 | mm |
O-ring STL file ID 62 × CS 4 mm (📦 #3586)
1 object(s) - format STL
Model of O-ring (torus-shaped seal) with dimensions ID 62 mm by thickness 4 mm. External diameter (OD) resulting is 70 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 62 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 120 × CS 5 mm (📦 #1543)
1 object(s) - format STL
3D file of sealing ring with dimensions Internal diameter (ID) 120 mm by CS 5 mm. Outer diameter (OD) resulting is 130 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 120 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 35 × CS 5 mm (📦 #2716)
1 object(s) - format STL
3D file in STL format of sealing ring with dimensions Inner diameter 35 mm × thickness 5 mm. Final diameter resulting is 45 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 35 | mm |
| cross section (CS) | 5 | mm |
O-ring STL file ID 39 × CS 7 mm (📦 #3090)
1 object(s) - format STL
3D file in STL format of circular seal with dimensions ID (inner diameter) 39 mm / thickness 7 mm. Final diameter corresponds to 53 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 39 | mm |
| cross section (CS) | 7 | mm |
O-ring STL 3D file ID 110 × CS 4 mm (📦 #1399)
1 object(s) - format STL
Model of O-ring with dimensions Internal diameter 110 mm by CS (cross section) 4 mm. Final diameter resulting corresponds to 118 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 110 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 70 × CS 3.5 mm (📦 #1336)
1 object(s) - format STL
3D file in STL format of rubber ring with dimensions Inner diameter 70 mm × CS 3.5 mm. The outer diameter resulting is 77 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 70 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 90 × CS 3.5 mm (📦 #1328)
1 object(s) - format STL
STL model of O-ring (torus-shaped seal) with dimensions ID 90 mm × section thickness 3.5 mm. Outer diameter (OD) resulting corresponds to 97 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 90 | mm |
| cross section (CS) | 3.5 | mm |