?>

Custom O-ring STL file ID 101 × CS 3.5 mm 📦#3484

STL Download STL
Create a new model:
from scratch search for a model
3D model in STL format of rubber ring with Inner diameter 101 mm × section thickness 3.5  mm. External diameter (OD) resulting is 108 mm.
Generation date: 2025-11-20
3D Model O-ring STL file ID 101 × CS 3.5 mm

3D model download

Free
  • o-ring-ID101mm-CS3.5mm_model34_model3484-nb0_dd{id}.stl : 1.5 Mo
STL Mesh quality : not defined
No compliance warranty No compliance warranty
(no copyright - public domain)
Safe download

Values for this model

This model was generated by the O-ring template, with the following values:
Parameter Value
#1 inner diameter (ID) 101 mm (≃3.98 in)
#2 cross section (CS) 3.5 mm (≃1/8 in)
Metadata Value
outer diameter (OD) 108 mm (≃4 1/4 in)
illustration of the parameters
Parameter overview

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 inner diameter (ID) ID
#2 cross section (CS) CS

Related 3D models

To search for a model based on your own parameters, go to the template page O-ring 

O-ring STL 3D file ID 90 × CS 3.5 mm (📦 #1328)

1 object(s) - format STL
O-ring STL 3D file ID 90 × CS 3.5 mm
STL model of O-ring (torus-shaped seal) with dimensions ID 90 mm × section thickness 3.5  mm. Outer diameter (OD) resulting corresponds to 97 mm.
Parameter Value Unit
inner diameter (ID) 90 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 110 × CS 4 mm (📦 #1399)

1 object(s) - format STL
O-ring STL 3D file ID 110 × CS 4 mm
Model of O-ring with dimensions Internal diameter 110 mm by CS (cross section) 4  mm. Final diameter resulting corresponds to 118 mm.
Parameter Value Unit
inner diameter (ID) 110 mm
cross section (CS) 4 mm

O'ring STL file ID 91 × CS 3 mm (📦 #2986)

1 object(s) - format STL
o'ring STL file ID 91 × CS 3 mm
Model of O-ring (torus-shaped seal) with ID (inner diameter) 91 mm / thickness 3  mm. The outer diameter corresponds to 97 mm.
Parameter Value Unit
inner diameter (ID) 91 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 91 × CS 4 mm (📦 #2989)

1 object(s) - format STL
O-ring STL 3D file ID 91 × CS 4 mm
STL file of sealing ring with Internal diameter (ID) 91 mm by CS (cross section) 4  mm. Outer diameter (OD) resulting is therefore 99 mm.
Parameter Value Unit
inner diameter (ID) 91 mm
cross section (CS) 4 mm

O-ring STL file ID 90 × CS 4 mm (📦 #2183)

1 object(s) - format STL
O-ring STL file ID 90 × CS 4 mm
STL model of O-ring (torus-shaped seal) with Internal diameter 90 mm by CS 4  mm. Outer diameter (OD, for outer diameter) is 98 mm.
Parameter Value Unit
inner diameter (ID) 90 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 84 × CS 3 mm (📦 #1807)

1 object(s) - format STL
O-ring STL 3D file ID 84 × CS 3 mm
File of sealing ring with dimensions Inner diameter 84 mm / CS 3  mm. Final diameter corresponds to 90 mm.
Parameter Value Unit
inner diameter (ID) 84 mm
cross section (CS) 3 mm

O'ring STL file ID 80 × CS 2.5 mm (📦 #1348)

1 object(s) - format STL
o'ring STL file ID 80 × CS 2.5 mm
3D model of O-ring (torus-shaped seal) with ID (inner diameter) 80 mm × CS 2.5  mm. Outer diameter (OD) is therefore 85 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 2.5 mm

O-ring STL file ID 70 × CS 3.5 mm (📦 #1336)

1 object(s) - format STL
O-ring STL file ID 70 × CS 3.5 mm
3D file in STL format of rubber ring with dimensions Inner diameter 70 mm × CS 3.5  mm. The outer diameter resulting is 77 mm.
Parameter Value Unit
inner diameter (ID) 70 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 70 × CS 4 mm (📦 #1681)

1 object(s) - format STL
O-ring STL 3D file ID 70 × CS 4 mm
STL file of sealing ring with dimensions Internal diameter 70 mm / CS 4  mm. External diameter (OD) is therefore 78 mm.
Parameter Value Unit
inner diameter (ID) 70 mm
cross section (CS) 4 mm

O-ring STL file ID 101 × CS 2 mm (📦 #2469)

1 object(s) - format STL
O-ring STL file ID 101 × CS 2 mm
3D model in STL format of O-ring (torus-shaped seal) with ID 101 mm × CS 2  mm. External diameter (OD) is therefore 105 mm.
Parameter Value Unit
inner diameter (ID) 101 mm
cross section (CS) 2 mm

O-ring STL file ID 100 × CS 5 mm (📦 #1171)

1 object(s) - format STL
O-ring STL file ID 100 × CS 5 mm
Model of rubber ring with dimensions ID (inner diameter) 100 mm / thickness 5  mm. Outer diameter (OD, for outer diameter) resulting is 110 mm.
Parameter Value Unit
inner diameter (ID) 100 mm
cross section (CS) 5 mm

O-ring STL file ID 72.4 × CS 2.6 mm (📦 #2004)

1 object(s) - format STL
O-ring STL file ID 72.4 × CS 2.6 mm
3D file in STL format of sealing ring with Internal diameter 72.4 mm by thickness 2.6  mm. External diameter (OD) corresponds to 77.6 mm.
Parameter Value Unit
inner diameter (ID) 72.4 mm
cross section (CS) 2.6 mm

O-ring STL 3D file ID 90 × CS 5 mm (📦 #2677)

1 object(s) - format STL
O-ring STL 3D file ID 90 × CS 5 mm
3D model of rubber ring with Inner diameter 90 mm by CS (cross section) 5  mm. Outer diameter (OD) resulting corresponds to 100 mm.
Parameter Value Unit
inner diameter (ID) 90 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 88.9 × CS 5 mm (📦 #3281)

1 object(s) - format STL
O-ring STL 3D file ID 88.9 × CS 5 mm
3D file in STL format of circular seal with dimensions ID 88.9 mm by CS 5  mm. External diameter (OD) resulting corresponds to 98.9 mm.
Parameter Value Unit
inner diameter (ID) 88.9 mm
cross section (CS) 5 mm

O'ring STL file ID 66 × CS 4 mm (📦 #3609)

1 object(s) - format STL
o'ring STL file ID 66 × CS 4 mm
STL model of sealing ring with ID (inner diameter) 66 mm × CS (cross section) 4  mm. The outer diameter corresponds to 74 mm.
Parameter Value Unit
inner diameter (ID) 66 mm
cross section (CS) 4 mm

O-ring STL file ID 120 × CS 5 mm (📦 #1543)

1 object(s) - format STL
O-ring STL file ID 120 × CS 5 mm
3D file of sealing ring with dimensions Internal diameter (ID) 120 mm by CS 5  mm. Outer diameter (OD) resulting is 130 mm.
Parameter Value Unit
inner diameter (ID) 120 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 80 × CS 5 mm (📦 #1547)

1 object(s) - format STL
O-ring STL 3D file ID 80 × CS 5 mm
File of rubber ring with Internal diameter (ID) 80 mm by thickness 5  mm. Final diameter resulting is therefore 90 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 5 mm

O-ring STL file ID 96 × CS 5.3 mm (📦 #3088)

1 object(s) - format STL
O-ring STL file ID 96 × CS 5.3 mm
Model of rubber ring with Internal diameter 96 mm / thickness 5.3  mm. External diameter (OD) is 106.6 mm.
Parameter Value Unit
inner diameter (ID) 96 mm
cross section (CS) 5.3 mm

O-ring STL file ID 62 × CS 4 mm (📦 #3586)

1 object(s) - format STL
O-ring STL file ID 62 × CS 4 mm
Model of O-ring (torus-shaped seal) with dimensions ID 62 mm by thickness 4  mm. External diameter (OD) resulting is 70 mm.
Parameter Value Unit
inner diameter (ID) 62 mm
cross section (CS) 4 mm

O'ring STL file ID 80 × CS 5.3 mm (📦 #3247)

1 object(s) - format STL
o'ring STL file ID 80 × CS 5.3 mm
Model of O-ring with dimensions Inner diameter (ID) 80 mm × section thickness 5.3  mm. External diameter (OD) is 90.6 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 5.3 mm

O-ring STL 3D file ID 75 × CS 5.3 mm (📦 #3246)

1 object(s) - format STL
O-ring STL 3D file ID 75 × CS 5.3 mm
STL file of rubber ring with Internal diameter 75 mm × thickness 5.3  mm. Outer diameter (OD) is therefore 85.6 mm.
Parameter Value Unit
inner diameter (ID) 75 mm
cross section (CS) 5.3 mm

O-ring STL file ID 144.7 × CS 2.6 mm (📦 #2005)

1 object(s) - format STL
O-ring STL file ID 144.7 × CS 2.6 mm
File of rubber ring with Internal diameter 144.7 mm × CS (cross section) 2.6  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 149.9 mm.
Parameter Value Unit
inner diameter (ID) 144.7 mm
cross section (CS) 2.6 mm

O-ring STL file ID 54 × CS 3 mm (📦 #1806)

1 object(s) - format STL
O-ring STL file ID 54 × CS 3 mm
Model of O-ring (torus-shaped seal) with Internal diameter 54 mm by CS 3  mm. The outer diameter resulting is 60 mm.
Parameter Value Unit
inner diameter (ID) 54 mm
cross section (CS) 3 mm

O'ring STL 3D file ID 51 × CS 3.5 mm (📦 #3350)

1 object(s) - format STL
o'ring STL 3D file ID 51 × CS 3.5 mm
STL model of sealing ring with Inner diameter 51 mm / thickness 3.5  mm. Outer diameter (OD, for outer diameter) corresponds to 58 mm.
Parameter Value Unit
inner diameter (ID) 51 mm
cross section (CS) 3.5 mm

O-ring STL file ID 50 × CS 3.6 mm (📦 #3144)

1 object(s) - format STL
O-ring STL file ID 50 × CS 3.6 mm
3D file in STL format of O-ring with ID (inner diameter) 50 mm by CS 3.6  mm. External diameter (OD) resulting is therefore 57.2 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 3.6 mm

O-ring STL file ID 62 × CS 2 mm (📦 #3582)

1 object(s) - format STL
O-ring STL file ID 62 × CS 2 mm
STL model of rubber ring with dimensions Inner diameter 62 mm × section thickness 2  mm. Final diameter resulting corresponds to 66 mm.
Parameter Value Unit
inner diameter (ID) 62 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 49 × CS 3.6 mm (📦 #3253)

1 object(s) - format STL (5.0/5) 1 vote(s)
O-ring STL 3D file ID 49 × CS 3.6 mm
STL model of circular seal with Internal diameter 49 mm / section thickness 3.6  mm. Outer diameter (OD) is therefore 56.2 mm.
Parameter Value Unit
inner diameter (ID) 49 mm
cross section (CS) 3.6 mm

O-ring STL file ID 50 × CS 3 mm (📦 #2430)

1 object(s) - format STL
O-ring STL file ID 50 × CS 3 mm
3D model in STL format of sealing ring with dimensions ID 50 mm by CS (cross section) 3  mm. Outer diameter (OD) is therefore 56 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 3 mm

O'ring STL file ID 150 × CS 2.5 mm (📦 #1347)

1 object(s) - format STL
o'ring STL file ID 150 × CS 2.5 mm
3D model in STL format of O-ring with Inner diameter 150 mm by CS (cross section) 2.5  mm. The outer diameter resulting is 155 mm.
Parameter Value Unit
inner diameter (ID) 150 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 47 × CS 3.6 mm (📦 #3146)

1 object(s) - format STL
O-ring STL 3D file ID 47 × CS 3.6 mm
3D model of rubber ring with Internal diameter (ID) 47 mm by section thickness 3.6  mm. The outer diameter resulting is therefore 54.2 mm.
Parameter Value Unit
inner diameter (ID) 47 mm
cross section (CS) 3.6 mm