Custom O-ring STL file ID 55 × CS 10 mm 📦#3550
Generation date: 2025-11-22
3D model download
Free- o-ring-ID55mm-CS10mm_model3550_model3550-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 55 mm (≃2.17 in) |
| #2 | cross section (CS) | 10 mm (≃0.39 in) |
| Metadata | Value |
|---|---|
| outer diameter (OD) | 75 mm (≃2 15/16 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O'ring STL 3D file ID 60 × CS 10 mm (📦 #3155)
1 object(s) - format STL
STL model of rubber ring with dimensions Internal diameter 60 mm / thickness 10 mm. External diameter (OD) corresponds to 80 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 60 | mm |
| cross section (CS) | 10 | mm |
O-ring STL 3D file ID 70 × CS 10 mm (📦 #3156)
1 object(s) - format STL
3D model of rubber ring with ID (inner diameter) 70 mm by thickness 10 mm. Outer diameter (OD, for outer diameter) is 90 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 70 | mm |
| cross section (CS) | 10 | mm |
O-ring STL 3D file ID 76 × CS 9.5 mm (📦 #1637)
1 object(s) - format STL
STL model of circular seal with dimensions Inner diameter 76 mm by CS 9.5 mm. External diameter (OD) resulting corresponds to 95 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 76 | mm |
| cross section (CS) | 9.5 | mm |
O-ring STL file ID 30 × CS 10 mm (📦 #4238)
1 object(s) - format STL
3D model in STL format of rubber ring with dimensions ID 30 mm × thickness 10 mm. Outer diameter (OD, for outer diameter) resulting corresponds to 50 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 30 | mm |
| cross section (CS) | 10 | mm |
O-ring STL 3D file ID 25 × CS 10 mm (📦 #2664)
1 object(s) - format STL
3D file in STL format of circular seal with dimensions Inner diameter (ID) 25 mm × CS 10 mm. Outer diameter (OD, for outer diameter) is 45 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 25 | mm |
| cross section (CS) | 10 | mm |
O-ring STL 3D file ID 11.4 × CS 9.9 mm (📦 #4617)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with ID 11.4 mm by section thickness 9.9 mm. Final diameter is 31.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 11.4 | mm |
| cross section (CS) | 9.9 | mm |
O-ring STL file ID 40 × CS 8 mm (📦 #8012)
1 object(s) - format STL
3D model in STL format of sealing ring with dimensions ID (inner diameter) 40 mm by CS 8 mm. Outer diameter (OD) resulting corresponds to 56 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 40 | mm |
| cross section (CS) | 8 | mm |
O-ring STL file ID 34 × CS 8 mm (📦 #7348)
1 object(s) - format STL
3D file in STL format of rubber ring with Internal diameter 34 mm / CS 8 mm. External diameter (OD) resulting is 50 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 34 | mm |
| cross section (CS) | 8 | mm |
O-ring STL file ID 32 × CS 8 mm (📦 #1520)
1 object(s) - format STL
3D model of O-ring with dimensions Internal diameter (ID) 32 mm × section thickness 8 mm. External diameter (OD) resulting is 48 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 32 | mm |
| cross section (CS) | 8 | mm |
O-ring STL 3D file ID 73.2 × CS 7.7 mm (📦 #2089)
1 object(s) - format STL
3D file of O-ring with dimensions Inner diameter (ID) 73.2 mm × thickness 7.7 mm. Outer diameter (OD) resulting is therefore 88.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 73.2 | mm |
| cross section (CS) | 7.7 | mm |
O'ring STL 3D file ID 25 × CS 8 mm (📦 #2229)
1 object(s) - format STL
3D file in STL format of O-ring with dimensions Inner diameter (ID) 25 mm by section thickness 8 mm. External diameter (OD) resulting corresponds to 41 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 25 | mm |
| cross section (CS) | 8 | mm |
O-ring STL file ID 60 × CS 7 mm (📦 #1598)
1 object(s) - format STL
Model of rubber ring with dimensions Internal diameter (ID) 60 mm × CS (cross section) 7 mm. Final diameter resulting is therefore 74 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 60 | mm |
| cross section (CS) | 7 | mm |
O-ring STL file ID 67 × CS 7 mm (📦 #1995)
1 object(s) - format STL
File of O-ring (torus-shaped seal) with dimensions Inner diameter 67 mm by CS (cross section) 7 mm. Outer diameter (OD) resulting corresponds to 81 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 67 | mm |
| cross section (CS) | 7 | mm |
O-ring STL file ID 39 × CS 7 mm (📦 #3090)
1 object(s) - format STL
3D file in STL format of circular seal with dimensions ID (inner diameter) 39 mm / thickness 7 mm. Final diameter corresponds to 53 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 39 | mm |
| cross section (CS) | 7 | mm |
O-ring STL 3D file ID 28 × CS 7 mm (📦 #1677)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with dimensions ID 28 mm / CS 7 mm. The outer diameter is 42 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 28 | mm |
| cross section (CS) | 7 | mm |
O'ring STL 3D file ID 18.5 × CS 7 mm (📦 #8762)
1 object(s) - format STL
File of circular seal with dimensions ID (inner diameter) 18.5 mm / thickness 7 mm. Outer diameter (OD) corresponds to 32.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 18.5 | mm |
| cross section (CS) | 7 | mm |
O-ring STL 3D file ID 18.2 × CS 7 mm (📦 #8764)
1 object(s) - format STL
Model of O-ring with Inner diameter 18.2 mm × thickness 7 mm. Outer diameter (OD) is therefore 32.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 18.2 | mm |
| cross section (CS) | 7 | mm |
O-ring STL 3D file ID 17.5 × CS 7 mm (📦 #8765)
1 object(s) - format STL
STL file of circular seal with dimensions Internal diameter (ID) 17.5 mm × CS 7 mm. Final diameter corresponds to 31.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17.5 | mm |
| cross section (CS) | 7 | mm |
O-ring STL file ID 16 × CS 7 mm (📦 #8766)
1 object(s) - format STL
3D model in STL format of O-ring with dimensions ID (inner diameter) 16 mm / CS (cross section) 7 mm. The outer diameter resulting is 30 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 16 | mm |
| cross section (CS) | 7 | mm |
O-ring STL 3D file ID 15 × CS 7 mm (📦 #8767)
1 object(s) - format STL
Model of circular seal with Internal diameter 15 mm by section thickness 7 mm. The outer diameter resulting corresponds to 29 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 15 | mm |
| cross section (CS) | 7 | mm |
O-ring STL file ID 69 × CS 6.5 mm (📦 #3815)
1 object(s) - format STL
3D model in STL format of sealing ring with dimensions ID 69 mm × section thickness 6.5 mm. Final diameter resulting is 82 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 69 | mm |
| cross section (CS) | 6.5 | mm |
O-ring STL file ID 96 × CS 7 mm (📦 #5004)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with ID 96 mm / section thickness 7 mm. External diameter (OD) is therefore 110 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 96 | mm |
| cross section (CS) | 7 | mm |
O-ring STL 3D file ID 13.5 × CS 7 mm (📦 #8768)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with dimensions Inner diameter 13.5 mm by thickness 7 mm. Outer diameter (OD) is 27.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 13.5 | mm |
| cross section (CS) | 7 | mm |
O-ring STL 3D file ID 12.9 × CS 7 mm (📦 #8771)
1 object(s) - format STL
File of rubber ring with dimensions Internal diameter 12.9 mm by thickness 7 mm. Final diameter resulting corresponds to 26.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12.9 | mm |
| cross section (CS) | 7 | mm |
O'ring STL file ID 12.7 × CS 7 mm (📦 #8770)
1 object(s) - format STL
3D file of circular seal with Internal diameter (ID) 12.7 mm / CS 7 mm. Outer diameter (OD, for outer diameter) is 26.7 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12.7 | mm |
| cross section (CS) | 7 | mm |
O-ring STL 3D file ID 12.5 × CS 7 mm (📦 #8769)
1 object(s) - format STL
3D file in STL format of circular seal with dimensions Internal diameter 12.5 mm / CS (cross section) 7 mm. Final diameter resulting is therefore 26.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12.5 | mm |
| cross section (CS) | 7 | mm |
O-ring STL file ID 12.4 × CS 7 mm (📦 #8679)
1 object(s) - format STL
Model of sealing ring with dimensions Inner diameter (ID) 12.4 mm by thickness 7 mm. External diameter (OD) is therefore 26.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12.4 | mm |
| cross section (CS) | 7 | mm |