O-ring 3D Files - Inner diameter (ID) 100 mm and over

30 Model(s)

O-ring STL file ID 100 × CS 5 mm (📦 #1171)

1 object(s) - format STL
O-ring STL file ID 100 × CS 5 mm
Model of rubber ring with dimensions ID (inner diameter) 100 mm / thickness 5  mm. Outer diameter (OD, for outer diameter) resulting is 110 mm.
Parameter Value Unit
inner diameter (ID) 100 mm
cross section (CS) 5 mm

O'ring STL file ID 100 × CS 3 mm (📦 #3802)

1 object(s) - format STL
o'ring STL file ID 100 × CS 3 mm
STL model of sealing ring with ID (inner diameter) 100 mm / section thickness 3  mm. Outer diameter (OD) resulting is therefore 106 mm.
Parameter Value Unit
inner diameter (ID) 100 mm
cross section (CS) 3 mm

O-ring STL file ID 101 × CS 2 mm (📦 #2469)

1 object(s) - format STL
O-ring STL file ID 101 × CS 2 mm
3D model in STL format of O-ring (torus-shaped seal) with ID 101 mm × CS 2  mm. External diameter (OD) is therefore 105 mm.
Parameter Value Unit
inner diameter (ID) 101 mm
cross section (CS) 2 mm

O-ring STL file ID 101 × CS 3.5 mm (📦 #3484)

1 object(s) - format STL
O-ring STL file ID 101 × CS 3.5 mm
3D model in STL format of rubber ring with Inner diameter 101 mm × section thickness 3.5  mm. External diameter (OD) resulting is 108 mm.
Parameter Value Unit
inner diameter (ID) 101 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 110 × CS 4 mm (📦 #1399)

1 object(s) - format STL
O-ring STL 3D file ID 110 × CS 4 mm
Model of O-ring with dimensions Internal diameter 110 mm by CS (cross section) 4  mm. Final diameter resulting corresponds to 118 mm.
Parameter Value Unit
inner diameter (ID) 110 mm
cross section (CS) 4 mm

O'ring STL 3D file ID 113.6 × CS 7 mm (📦 #7205)

1 object(s) - format STL
o'ring STL 3D file ID 113.6 × CS 7 mm
3D model of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 113.6 mm by CS 7  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 127.6 mm.
Parameter Value Unit
inner diameter (ID) 113.6 mm
cross section (CS) 7 mm

O-ring STL file ID 120 × CS 5 mm (📦 #1543)

1 object(s) - format STL
O-ring STL file ID 120 × CS 5 mm
3D file of sealing ring with dimensions Internal diameter (ID) 120 mm by CS 5  mm. Outer diameter (OD) resulting is 130 mm.
Parameter Value Unit
inner diameter (ID) 120 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 120 × CS 1 mm (📦 #4095)

1 object(s) - format STL
O-ring STL 3D file ID 120 × CS 1 mm
STL model of O-ring with ID 120 mm × section thickness 1  mm. Outer diameter (OD, for outer diameter) is 122 mm.
Parameter Value Unit
inner diameter (ID) 120 mm
cross section (CS) 1 mm

O-ring STL 3D file ID 130 × CS 6 mm (📦 #8560)

1 object(s) - format STL
O-ring STL 3D file ID 130 × CS 6 mm
STL model of sealing ring with Internal diameter (ID) 130 mm / section thickness 6  mm. Final diameter resulting is 142 mm.
Parameter Value Unit
inner diameter (ID) 130 mm
cross section (CS) 6 mm

O-ring STL 3D file ID 134 × CS 8.4 mm (📦 #3267)

1 object(s) - format STL
O-ring STL 3D file ID 134 × CS 8.4 mm
File of rubber ring with Inner diameter (ID) 134 mm / CS 8.4  mm. The outer diameter corresponds to 150.8 mm.
Parameter Value Unit
inner diameter (ID) 134 mm
cross section (CS) 8.4 mm

O-ring STL file ID 144.7 × CS 2.6 mm (📦 #2005)

1 object(s) - format STL
O-ring STL file ID 144.7 × CS 2.6 mm
File of rubber ring with Internal diameter 144.7 mm × CS (cross section) 2.6  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 149.9 mm.
Parameter Value Unit
inner diameter (ID) 144.7 mm
cross section (CS) 2.6 mm

O'ring STL 3D file ID 145 × CS 1 mm (📦 #2930)

1 object(s) - format STL
o'ring STL 3D file ID 145 × CS 1 mm
STL model of circular seal with dimensions Inner diameter 145 mm × thickness 1  mm. The outer diameter is 147 mm.
Parameter Value Unit
inner diameter (ID) 145 mm
cross section (CS) 1 mm

O-ring STL 3D file ID 145 × CS 5.3 mm (📦 #3089)

1 object(s) - format STL
O-ring STL 3D file ID 145 × CS 5.3 mm
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 145 mm by thickness 5.3  mm. Final diameter is 155.6 mm.
Parameter Value Unit
inner diameter (ID) 145 mm
cross section (CS) 5.3 mm

O-ring STL file ID 147.5 × CS 5.8 mm (📦 #3250)

1 object(s) - format STL
O-ring STL file ID 147.5 × CS 5.8 mm
Model of rubber ring with Internal diameter 147.5 mm / thickness 5.8  mm. Outer diameter (OD, for outer diameter) corresponds to 159.1 mm.
Parameter Value Unit
inner diameter (ID) 147.5 mm
cross section (CS) 5.8 mm

O'ring STL file ID 150 × CS 5 mm (📦 #1107)

1 object(s) - format STL
o'ring STL file ID 150 × CS 5 mm
3D model in STL format of rubber ring with dimensions Internal diameter 150 mm / section thickness 5  mm. Outer diameter (OD, for outer diameter) resulting is therefore 160 mm.
Parameter Value Unit
inner diameter (ID) 150 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 150 × CS 10 mm (📦 #1240)

1 object(s) - format STL
O-ring STL 3D file ID 150 × CS 10 mm
3D model in STL format of sealing ring with Internal diameter 150 mm by CS (cross section) 10  mm. Outer diameter (OD, for outer diameter) is therefore 170 mm.
Parameter Value Unit
inner diameter (ID) 150 mm
cross section (CS) 10 mm

O'ring STL file ID 150 × CS 2.5 mm (📦 #1347)

1 object(s) - format STL
o'ring STL file ID 150 × CS 2.5 mm
3D model in STL format of O-ring with Inner diameter 150 mm by CS (cross section) 2.5  mm. The outer diameter resulting is 155 mm.
Parameter Value Unit
inner diameter (ID) 150 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 150 × CS 1 mm (📦 #2927)

1 object(s) - format STL
O-ring STL 3D file ID 150 × CS 1 mm
3D file of O-ring with dimensions ID (inner diameter) 150 mm × section thickness 1  mm. External diameter (OD) is 152 mm.
Parameter Value Unit
inner diameter (ID) 150 mm
cross section (CS) 1 mm

O-ring STL 3D file ID 150 × CS 5.3 mm (📦 #3071)

1 object(s) - format STL
O-ring STL 3D file ID 150 × CS 5.3 mm
STL model of O-ring with Inner diameter 150 mm × CS 5.3  mm. The outer diameter resulting is 160.6 mm.
Parameter Value Unit
inner diameter (ID) 150 mm
cross section (CS) 5.3 mm

O'ring STL file ID 154.5 × CS 2 mm (📦 #7756)

1 object(s) - format STL
o'ring STL file ID 154.5 × CS 2 mm
3D file in STL format of O-ring (torus-shaped seal) with dimensions ID (inner diameter) 154.5 mm × CS 2  mm. Outer diameter (OD, for outer diameter) corresponds to 158.5 mm.
Parameter Value Unit
inner diameter (ID) 154.5 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 158 × CS 2.5 mm (📦 #3885)

1 object(s) - format STL
O-ring STL 3D file ID 158 × CS 2.5 mm
3D model in STL format of O-ring with dimensions Internal diameter (ID) 158 mm × thickness 2.5  mm. Outer diameter (OD, for outer diameter) is therefore 163 mm.
Parameter Value Unit
inner diameter (ID) 158 mm
cross section (CS) 2.5 mm

O-ring STL file ID 160 × CS 2.5 mm (📦 #3880)

1 object(s) - format STL
O-ring STL file ID 160 × CS 2.5 mm
Model of sealing ring with Inner diameter 160 mm by thickness 2.5  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 165 mm.
Parameter Value Unit
inner diameter (ID) 160 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 185 × CS 2 mm (📦 #2761)

1 object(s) - format STL
O-ring STL 3D file ID 185 × CS 2 mm
3D model in STL format of circular seal with Inner diameter (ID) 185 mm by section thickness 2  mm. Outer diameter (OD) is 189 mm.
Parameter Value Unit
inner diameter (ID) 185 mm
cross section (CS) 2 mm

O-ring STL file ID 200 × CS 1 mm (📦 #1050)

1 object(s) - format STL
O-ring STL file ID 200 × CS 1 mm
3D model in STL format of circular seal with Internal diameter 200 mm by section thickness 1  mm. External diameter (OD) is therefore 202 mm.
Parameter Value Unit
inner diameter (ID) 200 mm
cross section (CS) 1 mm

O-ring STL file ID 200 × CS 10 mm (📦 #1053)

1 object(s) - format STL
O-ring STL file ID 200 × CS 10 mm
3D model of O-ring with dimensions ID (inner diameter) 200 mm by thickness 10  mm. Outer diameter (OD) resulting is 220 mm.
Parameter Value Unit
inner diameter (ID) 200 mm
cross section (CS) 10 mm

O'ring STL file ID 200 × CS 8 mm (📦 #1172)

1 object(s) - format STL
o'ring STL file ID 200 × CS 8 mm
STL file of O-ring with dimensions ID (inner diameter) 200 mm by section thickness 8  mm. The outer diameter resulting is therefore 216 mm.
Parameter Value Unit
inner diameter (ID) 200 mm
cross section (CS) 8 mm

O'ring STL 3D file ID 200 × CS 6 mm (📦 #1173)

1 object(s) - format STL
o'ring STL 3D file ID 200 × CS 6 mm
Model of O-ring with Inner diameter (ID) 200 mm by CS (cross section) 6  mm. Final diameter resulting is 212 mm.
Parameter Value Unit
inner diameter (ID) 200 mm
cross section (CS) 6 mm

O-ring STL 3D file ID 200 × CS 2 mm (📦 #1512)

1 object(s) - format STL
O-ring STL 3D file ID 200 × CS 2 mm
3D model in STL format of circular seal with Inner diameter (ID) 200 mm × thickness 2  mm. Outer diameter (OD, for outer diameter) resulting is therefore 204 mm.
Parameter Value Unit
inner diameter (ID) 200 mm
cross section (CS) 2 mm

O-ring STL file ID 200 × CS 3 mm (📦 #6319)

1 object(s) - format STL
O-ring STL file ID 200 × CS 3 mm
3D model in STL format of rubber ring with Inner diameter (ID) 200 mm by section thickness 3  mm. Outer diameter (OD) is 206 mm.
Parameter Value Unit
inner diameter (ID) 200 mm
cross section (CS) 3 mm

O-ring STL file ID 200 × CS 2.2 mm (📦 #8672)

1 object(s) - format STL
O-ring STL file ID 200 × CS 2.2 mm
STL file of circular seal with Inner diameter (ID) 200 mm × CS 2.2  mm. Final diameter is therefore 204.4 mm.
Parameter Value Unit
inner diameter (ID) 200 mm
cross section (CS) 2.2 mm
Can't find the right model? Create it with your specs