?>

O-ring STL file ID 150 × CS 1 mm 📦#2927

STL Download STL
Create a new model:
from scratch search for a model
3D file of O-ring with dimensions ID (inner diameter) 150 mm × section thickness 1  mm. External diameter (OD) is 152 mm.
Generation date: 2025-10-31
3D Model O-ring STL file ID 150 × CS 1 mm

3D model download

Free
  • o-ring-ID150mm-CS1mm_model2927_model2927-nb0_dd{id}.stl : 1.5 Mo
STL Mesh quality : not defined
No compliance warranty No compliance warranty
(no copyright - public domain)
Safe download

Values for this model

This model was generated by the O-ring template, with the following values:
Parameter Value
#1 inner diameter (ID) 150 mm
#2 cross section (CS) 1 mm
Metadata Value
outer diameter (OD) 152 mm
illustration of the parameters
Representation of the parameters

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 inner diameter (ID) ID
#2 cross section (CS) CS

Related 3D models

To search for a model based on your own parameters, go to the template page O-ring 

O-ring STL 3D file ID 145 × CS 1 mm (📦 #2930)

1 object(s) - format STL
O-ring STL 3D file ID 145 × CS 1 mm
STL model of circular seal with dimensions Inner diameter 145 mm × thickness 1  mm. The outer diameter is 147 mm.
Parameter Value Unit
inner diameter (ID) 145 mm
cross section (CS) 1 mm

O-ring STL 3D file ID 150 × CS 2.5 mm (📦 #1347)

1 object(s) - format STL
O-ring STL 3D file ID 150 × CS 2.5 mm
3D model in STL format of O-ring with Inner diameter 150 mm by CS (cross section) 2.5  mm. The outer diameter resulting is 155 mm.
Parameter Value Unit
inner diameter (ID) 150 mm
cross section (CS) 2.5 mm

O-ring STL file ID 144.7 × CS 2.6 mm (📦 #2005)

1 object(s) - format STL
O-ring STL file ID 144.7 × CS 2.6 mm
File of rubber ring with Internal diameter 144.7 mm × CS (cross section) 2.6  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 149.9 mm.
Parameter Value Unit
inner diameter (ID) 144.7 mm
cross section (CS) 2.6 mm

O-ring STL file ID 185 × CS 2 mm (📦 #2761)

1 object(s) - format STL
O-ring STL file ID 185 × CS 2 mm
3D model in STL format of circular seal with Inner diameter (ID) 185 mm by section thickness 2  mm. Outer diameter (OD) is 189 mm.
Parameter Value Unit
inner diameter (ID) 185 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 200 × CS 1 mm (📦 #1050)

1 object(s) - format STL
O-ring STL 3D file ID 200 × CS 1 mm
3D model in STL format of circular seal with Internal diameter 200 mm by section thickness 1  mm. External diameter (OD) is therefore 202 mm.
Parameter Value Unit
inner diameter (ID) 200 mm
cross section (CS) 1 mm

O-ring STL file ID 101 × CS 2 mm (📦 #2469)

1 object(s) - format STL
O-ring STL file ID 101 × CS 2 mm
3D model in STL format of O-ring (torus-shaped seal) with ID 101 mm × CS 2  mm. External diameter (OD) is therefore 105 mm.
Parameter Value Unit
inner diameter (ID) 101 mm
cross section (CS) 2 mm

O-ring STL file ID 200 × CS 2 mm (📦 #1512)

1 object(s) - format STL
O-ring STL file ID 200 × CS 2 mm
3D model in STL format of circular seal with Inner diameter (ID) 200 mm × thickness 2  mm. Outer diameter (OD, for outer diameter) resulting is therefore 204 mm.
Parameter Value Unit
inner diameter (ID) 200 mm
cross section (CS) 2 mm

O-ring STL file ID 80 × CS 1 mm (📦 #2471)

1 object(s) - format STL
O-ring STL file ID 80 × CS 1 mm
STL model of O-ring (torus-shaped seal) with Inner diameter 80 mm / section thickness 1  mm. External diameter (OD) corresponds to 82 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 1 mm

O-ring STL 3D file ID 74 × CS 1 mm (📦 #1519)

1 object(s) - format STL
O-ring STL 3D file ID 74 × CS 1 mm
STL file of O-ring with ID (inner diameter) 74 mm by CS (cross section) 1  mm. External diameter (OD) corresponds to 76 mm.
Parameter Value Unit
inner diameter (ID) 74 mm
cross section (CS) 1 mm

O-ring STL 3D file ID 91 × CS 3 mm (📦 #2986)

1 object(s) - format STL
O-ring STL 3D file ID 91 × CS 3 mm
Model of O-ring (torus-shaped seal) with ID (inner diameter) 91 mm / thickness 3  mm. The outer diameter corresponds to 97 mm.
Parameter Value Unit
inner diameter (ID) 91 mm
cross section (CS) 3 mm

O-ring STL file ID 80 × CS 2.5 mm (📦 #1348)

1 object(s) - format STL
O-ring STL file ID 80 × CS 2.5 mm
3D model of O-ring (torus-shaped seal) with ID (inner diameter) 80 mm × CS 2.5  mm. Outer diameter (OD) is therefore 85 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 84 × CS 3 mm (📦 #1807)

1 object(s) - format STL
O-ring STL 3D file ID 84 × CS 3 mm
File of sealing ring with dimensions Inner diameter 84 mm / CS 3  mm. Final diameter corresponds to 90 mm.
Parameter Value Unit
inner diameter (ID) 84 mm
cross section (CS) 3 mm

O-ring STL file ID 110 × CS 4 mm (📦 #1399)

1 object(s) - format STL
O-ring STL file ID 110 × CS 4 mm
Model of O-ring with dimensions Internal diameter 110 mm by CS (cross section) 4  mm. Final diameter resulting corresponds to 118 mm.
Parameter Value Unit
inner diameter (ID) 110 mm
cross section (CS) 4 mm

O-ring STL file ID 90 × CS 3.5 mm (📦 #1328)

1 object(s) - format STL
O-ring STL file ID 90 × CS 3.5 mm
STL model of O-ring (torus-shaped seal) with dimensions ID 90 mm × section thickness 3.5  mm. Outer diameter (OD) resulting corresponds to 97 mm.
Parameter Value Unit
inner diameter (ID) 90 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 72.4 × CS 2.6 mm (📦 #2004)

1 object(s) - format STL
O-ring STL 3D file ID 72.4 × CS 2.6 mm
3D file in STL format of sealing ring with Internal diameter 72.4 mm by thickness 2.6  mm. External diameter (OD) corresponds to 77.6 mm.
Parameter Value Unit
inner diameter (ID) 72.4 mm
cross section (CS) 2.6 mm

O-ring STL file ID 91 × CS 4 mm (📦 #2989)

1 object(s) - format STL
O-ring STL file ID 91 × CS 4 mm
STL file of sealing ring with Internal diameter (ID) 91 mm by CS (cross section) 4  mm. Outer diameter (OD) resulting is therefore 99 mm.
Parameter Value Unit
inner diameter (ID) 91 mm
cross section (CS) 4 mm

O-ring STL file ID 90 × CS 4 mm (📦 #2183)

1 object(s) - format STL
O-ring STL file ID 90 × CS 4 mm
STL model of O-ring (torus-shaped seal) with Internal diameter 90 mm by CS 4  mm. Outer diameter (OD, for outer diameter) is 98 mm.
Parameter Value Unit
inner diameter (ID) 90 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 150 × CS 5 mm (📦 #1107)

1 object(s) - format STL
O-ring STL 3D file ID 150 × CS 5 mm
3D model in STL format of rubber ring with dimensions Internal diameter 150 mm / section thickness 5  mm. Outer diameter (OD, for outer diameter) resulting is therefore 160 mm.
Parameter Value Unit
inner diameter (ID) 150 mm
cross section (CS) 5 mm

O-ring STL file ID 70 × CS 3.5 mm (📦 #1336)

1 object(s) - format STL
O-ring STL file ID 70 × CS 3.5 mm
3D file in STL format of rubber ring with dimensions Inner diameter 70 mm × CS 3.5  mm. The outer diameter resulting is 77 mm.
Parameter Value Unit
inner diameter (ID) 70 mm
cross section (CS) 3.5 mm

O-ring STL file ID 120 × CS 5 mm (📦 #1543)

1 object(s) - format STL
O-ring STL file ID 120 × CS 5 mm
3D file of sealing ring with dimensions Internal diameter (ID) 120 mm by CS 5  mm. Outer diameter (OD) resulting is 130 mm.
Parameter Value Unit
inner diameter (ID) 120 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 48 × CS 1.7 mm (📦 #2177)

1 object(s) - format STL
O-ring STL 3D file ID 48 × CS 1.7 mm
Model of O-ring (torus-shaped seal) with Inner diameter 48 mm by section thickness 1.7  mm. Outer diameter (OD) resulting is 51.4 mm.
Parameter Value Unit
inner diameter (ID) 48 mm
cross section (CS) 1.7 mm

O-ring STL 3D file ID 45 × CS 1.5 mm (📦 #1343)

1 object(s) - format STL
O-ring STL 3D file ID 45 × CS 1.5 mm
3D file in STL format of O-ring with ID (inner diameter) 45 mm by section thickness 1.5  mm. Outer diameter (OD) corresponds to 48 mm.
Parameter Value Unit
inner diameter (ID) 45 mm
cross section (CS) 1.5 mm

O-ring STL 3D file ID 50 × CS 2.5 mm (📦 #1057)

1 object(s) - format STL
O-ring STL 3D file ID 50 × CS 2.5 mm
3D file in STL format of rubber ring with ID (inner diameter) 50 mm / thickness 2.5 mm. Outer diameter (OD) resulting corresponds to 55 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 2.5 mm

O-ring STL file ID 54 × CS 3 mm (📦 #1806)

1 object(s) - format STL
O-ring STL file ID 54 × CS 3 mm
Model of O-ring (torus-shaped seal) with Internal diameter 54 mm by CS 3  mm. The outer diameter resulting is 60 mm.
Parameter Value Unit
inner diameter (ID) 54 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 45 × CS 2 mm (📦 #1675)

1 object(s) - format STL
O-ring STL 3D file ID 45 × CS 2 mm
STL file of O-ring with Internal diameter 45 mm × CS (cross section) 2  mm. Outer diameter (OD) is therefore 49 mm.
Parameter Value Unit
inner diameter (ID) 45 mm
cross section (CS) 2 mm

O-ring STL file ID 70 × CS 4 mm (📦 #1681)

1 object(s) - format STL
O-ring STL file ID 70 × CS 4 mm
STL file of sealing ring with dimensions Internal diameter 70 mm / CS 4  mm. External diameter (OD) is therefore 78 mm.
Parameter Value Unit
inner diameter (ID) 70 mm
cross section (CS) 4 mm

O-ring STL file ID 100 × CS 5 mm (📦 #1171)

1 object(s) - format STL
O-ring STL file ID 100 × CS 5 mm
Model of rubber ring with dimensions ID (inner diameter) 100 mm / thickness 5  mm. Outer diameter (OD, for outer diameter) resulting is 110 mm.
Parameter Value Unit
inner diameter (ID) 100 mm
cross section (CS) 5 mm

O-ring STL file ID 41.7 × CS 2 mm (📦 #2888)

1 object(s) - format STL
O-ring STL file ID 41.7 × CS 2 mm
3D file of rubber ring with Inner diameter (ID) 41.7 mm by CS (cross section) 2  mm. The outer diameter resulting is therefore 45.7 mm.
Parameter Value Unit
inner diameter (ID) 41.7 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 50 × CS 3 mm (📦 #2430)

1 object(s) - format STL
O-ring STL 3D file ID 50 × CS 3 mm
3D model in STL format of sealing ring with dimensions ID 50 mm by CS (cross section) 3  mm. Outer diameter (OD) is therefore 56 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 3 mm