Custom O'ring STL file ID 74 × CS 1 mm 📦#1519
Generation date: 2025-09-02
3D model download
Free- o-ring-ID74mm-CS1mm_model1519-_model1519-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 74 mm (≃2.91 in) |
| #2 | cross section (CS) | 1 mm (≃0.04 in) |
| Metadata | Value |
|---|---|
| outer diameter (OD) | 76 mm (≃3 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O'ring STL 3D file ID 80 × CS 1 mm (📦 #2471)
1 object(s) - format STL
STL model of O-ring (torus-shaped seal) with Inner diameter 80 mm / section thickness 1 mm. External diameter (OD) corresponds to 82 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 80 | mm |
| cross section (CS) | 1 | mm |
O-ring STL file ID 64 × CS 1.6 mm (📦 #8681)
1 object(s) - format STL
3D file in STL format of rubber ring with Internal diameter 64 mm by section thickness 1.6 mm. Outer diameter (OD) corresponds to 67.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 64 | mm |
| cross section (CS) | 1.6 | mm |
O-ring STL 3D file ID 65 × CS 2 mm (📦 #8678)
1 object(s) - format STL
STL model of rubber ring with ID 65 mm / CS 2 mm. The outer diameter resulting corresponds to 69 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 65 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 84 × CS 2 mm (📦 #7418)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 84 mm × thickness 2 mm. Final diameter is 88 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 84 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 62 × CS 2 mm (📦 #3582)
1 object(s) - format STL
STL model of rubber ring with dimensions Inner diameter 62 mm × section thickness 2 mm. Final diameter resulting corresponds to 66 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 62 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 61.5 × CS 2 mm (📦 #5143)
1 object(s) - format STL
File of sealing ring with Internal diameter (ID) 61.5 mm / CS (cross section) 2 mm. Outer diameter (OD) is therefore 65.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 61.5 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 60 × CS 2 mm (📦 #3666)
1 object(s) - format STL
3D file of circular seal with ID 60 mm by CS 2 mm. Outer diameter (OD, for outer diameter) resulting is therefore 64 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 60 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 68 × CS 2.2 mm (📦 #8675)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with ID 68 mm / thickness 2.2 mm. External diameter (OD) resulting is therefore 72.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 68 | mm |
| cross section (CS) | 2.2 | mm |
O-ring STL 3D file ID 90 × CS 2 mm (📦 #9247)
1 object(s) - format STL
File of circular seal with ID (inner diameter) 90 mm by CS 2 mm. Final diameter corresponds to 94 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 90 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 48 × CS 1 mm (📦 #7961)
1 object(s) - format STL
File of rubber ring with dimensions Internal diameter 48 mm × CS 1 mm. Outer diameter (OD, for outer diameter) is therefore 50 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 48 | mm |
| cross section (CS) | 1 | mm |
O'ring STL 3D file ID 48 × CS 1.7 mm (📦 #2177)
1 object(s) - format STL
Model of O-ring (torus-shaped seal) with Inner diameter 48 mm by section thickness 1.7 mm. Outer diameter (OD) resulting is 51.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 48 | mm |
| cross section (CS) | 1.7 | mm |
O-ring STL 3D file ID 45 × CS 1.5 mm (📦 #1343)
1 object(s) - format STL
3D file in STL format of O-ring with ID (inner diameter) 45 mm by section thickness 1.5 mm. Outer diameter (OD) corresponds to 48 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 45 | mm |
| cross section (CS) | 1.5 | mm |
O'ring STL file ID 80 × CS 2.5 mm (📦 #1348)
1 object(s) - format STL
3D model of O-ring (torus-shaped seal) with ID (inner diameter) 80 mm × CS 2.5 mm. Outer diameter (OD) is therefore 85 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 80 | mm |
| cross section (CS) | 2.5 | mm |
O'ring STL file ID 44 × CS 1.5 mm (📦 #3888)
1 object(s) - format STL
3D file in STL format of circular seal with dimensions ID 44 mm by thickness 1.5 mm. Outer diameter (OD, for outer diameter) is therefore 47 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 44 | mm |
| cross section (CS) | 1.5 | mm |
O'ring STL file ID 41.4 × CS 1 mm (📦 #8070)
1 object(s) - format STL
Model of circular seal with dimensions Inner diameter 41.4 mm × CS 1 mm. The outer diameter is 43.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 41.4 | mm |
| cross section (CS) | 1 | mm |
O-ring STL file ID 43 × CS 1.5 mm (📦 #3908)
1 object(s) - format STL
3D file in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 43 mm by section thickness 1.5 mm. Outer diameter (OD) is 46 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 43 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 72.4 × CS 2.6 mm (📦 #2004)
1 object(s) - format STL
3D file in STL format of sealing ring with Internal diameter 72.4 mm by thickness 2.6 mm. External diameter (OD) corresponds to 77.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 72.4 | mm |
| cross section (CS) | 2.6 | mm |
O-ring STL file ID 48 × CS 2 mm (📦 #6105)
1 object(s) - format STL
3D model in STL format of circular seal with ID (inner diameter) 48 mm × section thickness 2 mm. Final diameter resulting is therefore 52 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 48 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 88 × CS 2.5 mm (📦 #9251)
1 object(s) - format STL
Model of sealing ring with Internal diameter 88 mm by thickness 2.5 mm. Outer diameter (OD, for outer diameter) is 93 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 88 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL file ID 101 × CS 2 mm (📦 #2469)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with ID 101 mm × CS 2 mm. External diameter (OD) is therefore 105 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 101 | mm |
| cross section (CS) | 2 | mm |
O'ring STL file ID 89 × CS 2.5 mm (📦 #9250)
1 object(s) - format STL
3D file in STL format of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 89 mm / CS 2.5 mm. Outer diameter (OD, for outer diameter) resulting corresponds to 94 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 89 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 45 × CS 2 mm (📦 #1675)
1 object(s) - format STL
STL file of O-ring with Internal diameter 45 mm × CS (cross section) 2 mm. Outer diameter (OD) is therefore 49 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 45 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 46.8 × CS 2.2 mm (📦 #4403)
1 object(s) - format STL
3D file of circular seal with ID 46.8 mm / CS 2.2 mm. Final diameter resulting corresponds to 51.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 46.8 | mm |
| cross section (CS) | 2.2 | mm |
O-ring STL file ID 52 × CS 2.5 mm (📦 #8722)
1 object(s) - format STL
3D model in STL format of circular seal with dimensions Internal diameter 52 mm / CS 2.5 mm. Outer diameter (OD) corresponds to 57 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 52 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 41.7 × CS 2 mm (📦 #2888)
1 object(s) - format STL
3D file of rubber ring with Inner diameter (ID) 41.7 mm by CS (cross section) 2 mm. The outer diameter resulting is therefore 45.7 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 41.7 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 50 × CS 2.5 mm (📦 #1057)
1 object(s) - format STL
3D file in STL format of rubber ring with ID (inner diameter) 50 mm / thickness 2.5 mm. Outer diameter (OD) resulting corresponds to 55 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 50 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL file ID 35 × CS 1 mm (📦 #7278)
1 object(s) - format STL
Model of O-ring with ID 35 mm / thickness 1 mm. The outer diameter resulting is therefore 37 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 35 | mm |
| cross section (CS) | 1 | mm |
O-ring STL 3D file ID 35 × CS 0.8 mm (📦 #7281)
1 object(s) - format STL
File of sealing ring with dimensions ID 35 mm / CS (cross section) 0.8 mm. Outer diameter (OD) corresponds to 36.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 35 | mm |
| cross section (CS) | 0.8 | mm |
O-ring STL 3D file ID 49 × CS 2.5 mm (📦 #3308)
1 object(s) - format STL
Model of O-ring with dimensions ID (inner diameter) 49 mm × thickness 2.5 mm. Final diameter resulting is therefore 54 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 49 | mm |
| cross section (CS) | 2.5 | mm |