O-ring STL 3D file ID 26 × CS 0.2 mm 📦#2854
Generation date: 2025-10-28
3D model download
Free- o-ring-ID26mm-CS0.2mm_model285_model2854-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 26 mm |
| #2 | cross section (CS) | 0.2 mm |
| Metadata | Value |
|---|---|
| outer diameter (OD) | 26.4 mm |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O-ring STL 3D file ID 13 × CS 1 mm (📦 #2106)
1 object(s) - format STL
STL model of rubber ring with ID 13 mm / thickness 1 mm. Final diameter resulting is therefore 15 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 13 | mm |
| cross section (CS) | 1 | mm |
O-ring STL file ID 12 × CS 1 mm (📦 #1576)
1 object(s) - format STL
3D file of O-ring with Internal diameter (ID) 12 mm × section thickness 1 mm. Final diameter resulting is therefore 14 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12 | mm |
| cross section (CS) | 1 | mm |
O-ring STL 3D file ID 4.6 × CS 0.8 mm (📦 #1753)
1 object(s) - format STL
3D model in STL format of O-ring with dimensions Inner diameter (ID) 4.6 mm by CS 0.8 mm. Final diameter resulting is 6.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 4.6 | mm |
| cross section (CS) | 0.8 | mm |
O-ring STL file ID 5 × CS 1 mm (📦 #1044)
1 object(s) - format STL
3D file of sealing ring with Inner diameter (ID) 5 mm / CS (cross section) 1 mm. Final diameter resulting is 7 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 5 | mm |
| cross section (CS) | 1 | mm |
O-ring STL file ID 4 × CS 1 mm (📦 #2370)
1 object(s) - format STL
3D model of O-ring with dimensions Inner diameter 4 mm by CS (cross section) 1 mm. Outer diameter (OD, for outer diameter) resulting is therefore 6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 4 | mm |
| cross section (CS) | 1 | mm |
O-ring STL file ID 3 × CS 1 mm (📦 #1042)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with dimensions Internal diameter (ID) 3 mm / CS 1 mm. Outer diameter (OD, for outer diameter) is 5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 3 | mm |
| cross section (CS) | 1 | mm |
O-ring STL file ID 2 × CS 1 mm (📦 #2369)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with dimensions ID (inner diameter) 2 mm / CS 1 mm. External diameter (OD) resulting corresponds to 4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 2 | mm |
| cross section (CS) | 1 | mm |
O-ring STL 3D file ID 0.74 × CS 1.02 mm (📦 #1032)
1 object(s) - format STL
3D model in STL format of O-ring with ID (inner diameter) 0.74 mm × section thickness 1.02 mm. External diameter (OD) corresponds to 2.78 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 0.74 | mm |
| cross section (CS) | 1.02 | mm |
O-ring STL file ID 17 × CS 1.5 mm (📦 #1559)
1 object(s) - format STL
Model of sealing ring with Inner diameter (ID) 17 mm by CS (cross section) 1.5 mm. Final diameter is 20 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 16 × CS 1.5 mm (📦 #1560)
1 object(s) - format STL
3D file in STL format of circular seal with dimensions Inner diameter 16 mm by CS (cross section) 1.5 mm. Outer diameter (OD, for outer diameter) corresponds to 19 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 16 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 15.8 × CS 1.5 mm (📦 #2883)
1 object(s) - format STL
Model of circular seal with ID 15.8 mm × CS (cross section) 1.5 mm. The outer diameter resulting is 18.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 15.8 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 15 × CS 1.5 mm (📦 #1561)
1 object(s) - format STL
STL model of sealing ring with Inner diameter 15 mm / thickness 1.5 mm. The outer diameter resulting is therefore 18 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 15 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 12 × CS 1.5 mm (📦 #1036)
1 object(s) - format STL
File of rubber ring with Inner diameter 12 mm × CS (cross section) 1.5 mm. Outer diameter (OD, for outer diameter) resulting is therefore 15 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 45 × CS 1.5 mm (📦 #1343)
1 object(s) - format STL
3D file in STL format of O-ring with ID (inner diameter) 45 mm by section thickness 1.5 mm. Outer diameter (OD) corresponds to 48 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 45 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 7 × CS 1.5 mm (📦 #1039)
1 object(s) - format STL
3D file in STL format of O-ring with dimensions Internal diameter 7 mm / CS 1.5 mm. External diameter (OD) is therefore 10 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 7 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 16.5 × CS 1.7 mm (📦 #2884)
1 object(s) - format STL
3D model in STL format of circular seal with dimensions Internal diameter 16.5 mm × section thickness 1.7 mm. The outer diameter corresponds to 19.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 16.5 | mm |
| cross section (CS) | 1.7 | mm |
O-ring STL 3D file ID 3 × CS 1.5 mm (📦 #1041)
1 object(s) - format STL
Model of rubber ring with Internal diameter (ID) 3 mm / section thickness 1.5 mm. The outer diameter resulting corresponds to 6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 3 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 17.6 × CS 1.8 mm (📦 #1593)
1 object(s) - format STL
File of O-ring with ID (inner diameter) 17.6 mm / thickness 1.8 mm. Outer diameter (OD) resulting is 21.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17.6 | mm |
| cross section (CS) | 1.8 | mm |
O-ring STL file ID 5.1 × CS 1.6 mm (📦 #1565)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with Internal diameter 5.1 mm × thickness 1.6 mm. Outer diameter (OD) resulting is therefore 8.3 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 5.1 | mm |
| cross section (CS) | 1.6 | mm |
O-ring STL 3D file ID 16.5 × CS 1.8 mm (📦 #1594)
1 object(s) - format STL
STL model of rubber ring with dimensions ID (inner diameter) 16.5 mm by section thickness 1.8 mm. Outer diameter (OD, for outer diameter) corresponds to 20.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 16.5 | mm |
| cross section (CS) | 1.8 | mm |
O-ring STL file ID 14 × CS 1.8 mm (📦 #1638)
1 object(s) - format STL
File of O-ring (torus-shaped seal) with dimensions ID (inner diameter) 14 mm / section thickness 1.8 mm. The outer diameter corresponds to 17.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 14 | mm |
| cross section (CS) | 1.8 | mm |
O-ring STL 3D file ID 13 × CS 1.8 mm (📦 #2107)
1 object(s) - format STL
File of rubber ring with dimensions Internal diameter (ID) 13 mm × thickness 1.8 mm. Final diameter corresponds to 16.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 13 | mm |
| cross section (CS) | 1.8 | mm |
O-ring STL 3D file ID 48 × CS 1.7 mm (📦 #2177)
1 object(s) - format STL
Model of O-ring (torus-shaped seal) with Inner diameter 48 mm by section thickness 1.7 mm. Outer diameter (OD) resulting is 51.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 48 | mm |
| cross section (CS) | 1.7 | mm |
O-ring STL file ID 6.07 × CS 1.78 mm (📦 #1033)
1 object(s) - format STL
3D model of sealing ring with Internal diameter 6.07 mm by CS 1.78 mm. The outer diameter is 9.63 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 6.07 | mm |
| cross section (CS) | 1.78 | mm |
O-ring STL file ID 25 × CS 2 mm (📦 #2571)
1 object(s) - format STL
STL file of rubber ring with dimensions Inner diameter (ID) 25 mm / thickness 2 mm. Outer diameter (OD) corresponds to 29 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 25 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 24 × CS 2 mm (📦 #2587)
1 object(s) - format STL
Model of circular seal with Inner diameter 24 mm / CS 2 mm. Final diameter resulting is 28 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 24 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 23 × CS 2 mm (📦 #2588)
1 object(s) - format STL
File of O-ring with ID 23 mm × CS (cross section) 2 mm. The outer diameter is 27 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 23 | mm |
| cross section (CS) | 2 | mm |
O-ring STL file ID 22 × CS 2 mm (📦 #1021)
1 object(s) - format STL
STL model of O-ring with ID 22 mm by CS 2 mm. External diameter (OD) is therefore 26 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 22 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 30 × CS 2 mm (📦 #1118)
1 object(s) - format STL (5.0/5) 1 vote(s)
File of circular seal with dimensions ID 30 mm / thickness 2 mm. Outer diameter (OD, for outer diameter) resulting corresponds to 34 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 30 | mm |
| cross section (CS) | 2 | mm |
O-ring STL 3D file ID 4.47 × CS 1.78 mm (📦 #1037)
1 object(s) - format STL (5.0/5) 1 vote(s)
File of circular seal with dimensions ID (inner diameter) 4.47 mm × section thickness 1.78 mm. Final diameter is therefore 8.03 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 4.47 | mm |
| cross section (CS) | 1.78 | mm |