Inline tube adapter 3D Files - Side A outer diameter 100 to 150 mm | page 4

Straight tube reducer ⌀120 mm to ⌀80 mm in STL 3D format. Length of this connector is 240 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are rounded on the inside.

Inline sleeve ⌀120 mm to ⌀93 mm in STL 3D format. Final length of this coupler is 110 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Tube fitting ⌀120 mm to ⌀60 mm in STL format. Total length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.

Straight tube coupler ⌀120 mm to ⌀16 mm in STL format. Final length of this sleeve is 25 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 5 mm as well. The ends are not rounded.

Inline tube coupler ⌀120 mm to ⌀16 mm in STL 3D format. Length of this adapter is 30 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 10 mm. The ends have a fillet to ease the connection.

Straight tube connector ⌀120 mm to ⌀93 mm in STL format. Length of this adapter is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Tube adapter ⌀120 mm to ⌀10 mm in STL 3D format. Final length of this sleeve is 155 mm. The larger-diameter tube has a thickness of 20 mm and a length of 5 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 50 mm. The ends are not rounded.

Inline tube reducer ⌀122 mm to ⌀78 mm in STL format. Final length of this fitting is 105 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are raw.

Tube fitting ⌀123 mm to ⌀58 mm in STL format. Length of this sleeve is 85 mm. The larger-diameter tube has a thickness of 5 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 25 mm as well. The ends are not rounded.

Inline tube junction ⌀123 mm to ⌀58 mm in STL 3D format. Final length of this junction is 70 mm. The larger-diameter tube has a thickness of 5 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 25 mm as well. The ends feature a fillet to make tube connection easier.

Straight tube adapter ⌀123 mm to ⌀58 mm in STL format. Length of this reducer is 120 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The two axes of the tubes are off-center by 4.9 mm. The ends feature a fillet to facilitate the connection of the two tubes.

Straight sleeve ⌀124 mm to ⌀103 mm in STL format. Total length of this coupler is 120 mm. The thickness of the tubes is identical: 6 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are rounded to make tube connection easier.

Inline tube coupler ⌀124 mm to ⌀119 mm in STL format. Total length of this adapter is 40 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 10 mm. The ends are not rounded.

Inline tube junction ⌀125 mm to ⌀100 mm in STL 3D format. Length of this junction is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 25 mm. The axes of the tubes are off-center by 1 mm. The ends are not rounded.

Straight tube connector ⌀125 mm to ⌀124 mm in STL 3D format. Final length of this connector is 125 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends have no fillet.

Inline fitting ⌀125 mm to ⌀109 mm in STL 3D format. Length of this reducer is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet to ease the connection.

Inline tube coupler ⌀125 mm to ⌀107 mm in STL 3D format. Total length of this junction is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature a fillet to make tube connection easier.

Inline tube junction ⌀125 mm to ⌀105 mm in STL 3D format. Total length of this coupler is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet to ease the connection.

Straight tube adapter ⌀125 mm to ⌀113 mm in STL format. Length of this reducer is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet to facilitate the connection of the two tubes.

Inline tube junction ⌀126 mm to ⌀80 mm in STL format. Length of this junction is 97 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 27 mm, the smaller one of 30 mm. The ends are rounded on the inside to make tube connection easier.

Tube adapter ⌀127 mm to ⌀78 mm in STL 3D format. Total length of this junction is 105 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are raw.

Inline tube coupler ⌀127 mm to ⌀78 mm in STL 3D format. Total length of this junction is 85 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are raw.

Inline tube coupler ⌀128 mm to ⌀98 mm in STL format. Final length of this adapter is 71 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 21 mm. The ends are raw.

Tube connector ⌀130 mm to ⌀100 mm in STL format. Final length of this sleeve is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 25 mm. The axes of the tubes are offset by 1 mm. The ends have no fillet.

Straight sleeve ⌀133 mm to ⌀90 mm in STL 3D format. Length of this adapter is 240 mm. The thickness of the tubes is identical: 8 mm. The larger-diameter tube has a length of 100 mm, the smaller one of 100 mm as well. The ends have no fillet.

Tube adapter ⌀135 mm to ⌀100 mm in STL 3D format. Length of this coupler is 140 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends feature an external fillet to facilitate the connection of the two tubes.

Tube fitting ⌀140 mm to ⌀120 mm in STL 3D format. Final length of this sleeve is 60 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Straight tube connector ⌀140 mm to ⌀100 mm in STL format. Total length of this junction is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 30 mm. The two axes of the tubes are offset by 19.9 mm. The ends have no fillet.

Tube connector ⌀140 mm to ⌀93 mm in STL 3D format. Length of this adapter is 110 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Inline tubing adapter ⌀140 mm to ⌀100 mm in STL 3D format. Final length of this junction is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 30 mm. The two axes of the tubes are offset by 19.9 mm. The ends feature an external fillet to facilitate the connection of the two tubes.