O-ring 3D Files - Inner diameter (ID) 20 to 40 mm | page 2

Model(s) 31 to 60 of 79

O-ring STL 3D file ID 25 × CS 3.5 mm (📦 #8200)

1 object(s) - format STL (3.0/5) 1 vote(s)
O-ring STL 3D file ID 25 × CS 3.5 mm
3D model in STL format of rubber ring with dimensions Internal diameter 25 mm / thickness 3.5  mm. The outer diameter corresponds to 32 mm.
Parameter Value Unit
inner diameter (ID) 25 mm
cross section (CS) 3.5 mm

O-ring STL file ID 25.3 × CS 3 mm (📦 #4759)

1 object(s) - format STL
O-ring STL file ID 25.3 × CS 3 mm
STL model of rubber ring with ID 25.3 mm / section thickness 3  mm. Outer diameter (OD, for outer diameter) is 31.3 mm.
Parameter Value Unit
inner diameter (ID) 25.3 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 26 × CS 3 mm (📦 #1022)

1 object(s) - format STL
O-ring STL 3D file ID 26 × CS 3 mm
3D file of rubber ring with dimensions ID 26 mm × thickness 3  mm. The outer diameter resulting is therefore 32 mm.
Parameter Value Unit
inner diameter (ID) 26 mm
cross section (CS) 3 mm

O-ring STL file ID 26 × CS 2.5 mm (📦 #1437)

1 object(s) - format STL
O-ring STL file ID 26 × CS 2.5 mm
STL model of rubber ring with Internal diameter 26 mm / section thickness 2.5  mm. Final diameter is therefore 31 mm.
Parameter Value Unit
inner diameter (ID) 26 mm
cross section (CS) 2.5 mm

O-ring STL file ID 26 × CS 0.2 mm (📦 #2854)

1 object(s) - format STL
O-ring STL file ID 26 × CS 0.2 mm
File of O-ring with dimensions Inner diameter 26 mm by section thickness 0.2  mm. External diameter (OD) resulting is 26.4 mm.
Parameter Value Unit
inner diameter (ID) 26 mm
cross section (CS) 0.2 mm

O-ring STL 3D file ID 26 × CS 1.5 mm (📦 #3912)

1 object(s) - format STL
O-ring STL 3D file ID 26 × CS 1.5 mm
Model of circular seal with Internal diameter (ID) 26 mm × CS 1.5  mm. The outer diameter resulting is therefore 29 mm.
Parameter Value Unit
inner diameter (ID) 26 mm
cross section (CS) 1.5 mm

O-ring STL file ID 26 × CS 1 mm (📦 #4597)

1 object(s) - format STL
O-ring STL file ID 26 × CS 1 mm
3D model of circular seal with ID 26 mm / CS (cross section) 1  mm. External diameter (OD) resulting corresponds to 28 mm.
Parameter Value Unit
inner diameter (ID) 26 mm
cross section (CS) 1 mm

O'ring STL file ID 27 × CS 3 mm (📦 #2782)

1 object(s) - format STL
o'ring STL file ID 27 × CS 3 mm
3D file in STL format of O-ring (torus-shaped seal) with dimensions Internal diameter 27 mm / section thickness 3  mm. External diameter (OD) resulting is 33 mm.
Parameter Value Unit
inner diameter (ID) 27 mm
cross section (CS) 3 mm

O'ring STL file ID 27 × CS 1.5 mm (📦 #3913)

1 object(s) - format STL
o'ring STL file ID 27 × CS 1.5 mm
3D model of sealing ring with dimensions Internal diameter (ID) 27 mm × CS (cross section) 1.5  mm. Final diameter resulting is 30 mm.
Parameter Value Unit
inner diameter (ID) 27 mm
cross section (CS) 1.5 mm

O-ring STL 3D file ID 27 × CS 4 mm (📦 #9216)

1 object(s) - format STL
O-ring STL 3D file ID 27 × CS 4 mm
3D model in STL format of sealing ring with ID (inner diameter) 27 mm / CS 4  mm. External diameter (OD) resulting is therefore 35 mm.
Parameter Value Unit
inner diameter (ID) 27 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 28 × CS 7 mm (📦 #1677)

1 object(s) - format STL
O-ring STL 3D file ID 28 × CS 7 mm
3D file of O-ring (torus-shaped seal) with dimensions ID 28 mm / CS 7  mm. The outer diameter is 42 mm.
Parameter Value Unit
inner diameter (ID) 28 mm
cross section (CS) 7 mm

O-ring STL file ID 28 × CS 1.5 mm (📦 #3886)

1 object(s) - format STL
O-ring STL file ID 28 × CS 1.5 mm
3D model in STL format of O-ring (torus-shaped seal) with Internal diameter 28 mm / CS (cross section) 1.5  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 31 mm.
Parameter Value Unit
inner diameter (ID) 28 mm
cross section (CS) 1.5 mm

O'ring STL 3D file ID 28 × CS 5 mm (📦 #4470)

1 object(s) - format STL
o'ring STL 3D file ID 28 × CS 5 mm
File of O-ring (torus-shaped seal) with Internal diameter (ID) 28 mm × CS 5  mm. The outer diameter corresponds to 38 mm.
Parameter Value Unit
inner diameter (ID) 28 mm
cross section (CS) 5 mm

O-ring STL file ID 28.5 × CS 3.5 mm (📦 #1581)

1 object(s) - format STL
O-ring STL file ID 28.5 × CS 3.5 mm
STL file of rubber ring with dimensions ID (inner diameter) 28.5 mm by CS (cross section) 3.5  mm. Outer diameter (OD) resulting is 35.5 mm.
Parameter Value Unit
inner diameter (ID) 28.5 mm
cross section (CS) 3.5 mm

O'ring STL 3D file ID 28.5 × CS 3.6 mm (📦 #3249)

1 object(s) - format STL
o'ring STL 3D file ID 28.5 × CS 3.6 mm
3D model of O-ring with Internal diameter 28.5 mm / CS (cross section) 3.6  mm. Outer diameter (OD, for outer diameter) is 35.7 mm.
Parameter Value Unit
inner diameter (ID) 28.5 mm
cross section (CS) 3.6 mm

O-ring STL file ID 29 × CS 1.5 mm (📦 #3881)

1 object(s) - format STL
O-ring STL file ID 29 × CS 1.5 mm
File of rubber ring with Inner diameter 29 mm by thickness 1.5  mm. The outer diameter resulting corresponds to 32 mm.
Parameter Value Unit
inner diameter (ID) 29 mm
cross section (CS) 1.5 mm

O-ring STL file ID 30 × CS 4 mm (📦 #1023)

1 object(s) - format STL
O-ring STL file ID 30 × CS 4 mm
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 30 mm by CS (cross section) 4  mm. Final diameter is 38 mm.
Parameter Value Unit
inner diameter (ID) 30 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 30 × CS 3 mm (📦 #1047)

1 object(s) - format STL
O-ring STL 3D file ID 30 × CS 3 mm
STL model of circular seal with dimensions ID (inner diameter) 30 mm × section thickness 3  mm. The outer diameter is therefore 36 mm.
Parameter Value Unit
inner diameter (ID) 30 mm
cross section (CS) 3 mm

O-ring STL file ID 30 × CS 2 mm (📦 #1118)

1 object(s) - format STL (5.0/5) 1 vote(s)
O-ring STL file ID 30 × CS 2 mm
File of circular seal with dimensions ID 30 mm / thickness 2  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 34 mm.
Parameter Value Unit
inner diameter (ID) 30 mm
cross section (CS) 2 mm

O-ring STL file ID 30 × CS 10 mm (📦 #4238)

1 object(s) - format STL
O-ring STL file ID 30 × CS 10 mm
3D model in STL format of rubber ring with dimensions ID 30 mm × thickness 10  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 50 mm.
Parameter Value Unit
inner diameter (ID) 30 mm
cross section (CS) 10 mm

O-ring STL 3D file ID 30 × CS 5 mm (📦 #7009)

1 object(s) - format STL
O-ring STL 3D file ID 30 × CS 5 mm
3D file of O-ring with ID (inner diameter) 30 mm by section thickness 5  mm. Outer diameter (OD, for outer diameter) resulting is 40 mm.
Parameter Value Unit
inner diameter (ID) 30 mm
cross section (CS) 5 mm

O'ring STL file ID 30 × CS 6 mm (📦 #9957)

1 object(s) - format STL
o'ring STL file ID 30 × CS 6 mm
3D file in STL format of circular seal with Inner diameter (ID) 30 mm × CS (cross section) 6  mm. Outer diameter (OD) resulting is therefore 42 mm.
Parameter Value Unit
inner diameter (ID) 30 mm
cross section (CS) 6 mm

O-ring STL 3D file ID 30.5 × CS 3.6 mm (📦 #1503)

1 object(s) - format STL
O-ring STL 3D file ID 30.5 × CS 3.6 mm
3D file in STL format of sealing ring with dimensions ID (inner diameter) 30.5 mm × CS (cross section) 3.6  mm. Outer diameter (OD) resulting corresponds to 37.7 mm.
Parameter Value Unit
inner diameter (ID) 30.5 mm
cross section (CS) 3.6 mm

O-ring STL 3D file ID 31 × CS 3.5 mm (📦 #1579)

1 object(s) - format STL
O-ring STL 3D file ID 31 × CS 3.5 mm
STL model of rubber ring with Internal diameter 31 mm × CS 3.5  mm. External diameter (OD) resulting corresponds to 38 mm.
Parameter Value Unit
inner diameter (ID) 31 mm
cross section (CS) 3.5 mm

O-ring STL file ID 31.7 × CS 3.5 mm (📦 #8243)

1 object(s) - format STL
O-ring STL file ID 31.7 × CS 3.5 mm
3D model of rubber ring with dimensions Inner diameter (ID) 31.7 mm × CS (cross section) 3.5  mm. Final diameter resulting is therefore 38.7 mm.
Parameter Value Unit
inner diameter (ID) 31.7 mm
cross section (CS) 3.5 mm

O-ring STL file ID 32 × CS 8 mm (📦 #1520)

1 object(s) - format STL
O-ring STL file ID 32 × CS 8 mm
3D model of O-ring with dimensions Internal diameter (ID) 32 mm × section thickness 8  mm. External diameter (OD) resulting is 48 mm.
Parameter Value Unit
inner diameter (ID) 32 mm
cross section (CS) 8 mm

O-ring STL 3D file ID 32 × CS 4 mm (📦 #2202)

1 object(s) - format STL
O-ring STL 3D file ID 32 × CS 4 mm
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter 32 mm / CS (cross section) 4  mm. Outer diameter (OD) corresponds to 40 mm.
Parameter Value Unit
inner diameter (ID) 32 mm
cross section (CS) 4 mm

O-ring STL file ID 32.8 × CS 3 mm (📦 #3665)

1 object(s) - format STL (5.0/5) 1 vote(s)
O-ring STL file ID 32.8 × CS 3 mm
3D model of rubber ring with Internal diameter (ID) 32.8 mm × CS 3  mm. The outer diameter resulting is 38.8 mm.
Parameter Value Unit
inner diameter (ID) 32.8 mm
cross section (CS) 3 mm

O'ring STL file ID 33 × CS 3.5 mm (📦 #8201)

1 object(s) - format STL
o'ring STL file ID 33 × CS 3.5 mm
STL file of O-ring with ID (inner diameter) 33 mm by CS (cross section) 3.5  mm. The outer diameter is 40 mm.
Parameter Value Unit
inner diameter (ID) 33 mm
cross section (CS) 3.5 mm

O'ring STL file ID 33.8 × CS 3 mm (📦 #3664)

1 object(s) - format STL
o'ring STL file ID 33.8 × CS 3 mm
3D model of O-ring (torus-shaped seal) with dimensions ID (inner diameter) 33.8 mm / CS 3  mm. External diameter (OD) is 39.8 mm.
Parameter Value Unit
inner diameter (ID) 33.8 mm
cross section (CS) 3 mm
Can't find the right model? Create it with your specs