?>

Tube adapter STL 3D file ⌀ 250–60 mm (Length: 140 mm) 📦#1844

STL Download STL
Create a new model:
from scratch search for a model
Tube connector ⌀250 mm to ⌀60 mm in STL 3D format. Length of this fitting is 140 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
Generation date: 2025-09-17
3D Model Tube adapter STL 3D file ⌀ 250–60 mm (Length: 140 mm)

3D model download

Free
  • inline-tube-adapter-lenA20mm-d_model1844-nb0_dd{id}.stl : 5.5 Mo
STL Mesh quality : Linear deflection 0.05 Angular deflection 0.05
No compliance warranty No compliance warranty
(attribution - commercial use allowed)
Safe download

Values for this model

This model was generated by the Inline tube adapter template, with the following values:
Parameter Value
#1 side A length 20 mm
#2 side A outer diameter 250 mm
#3 side A thickness 2 mm
#4 side B length 20 mm
#5 side B outer diameter 60 mm
#6 side B thickness 2 mm
#7 transition length 100 mm
#8 axis offset 0 mm
#9 ends fillet no fillet
illustration of the parameters
Representation of the parameters

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 side A length lenA
#2 side A outer diameter diA
#3 side A thickness thA
#4 side B length lenB
#5 side B outer diameter diB
#6 side B thickness thB
#7 transition length tra
#8 axis offset ofs
#9 ends fillet fil

Related 3D models

To search for a model based on your own parameters, go to the template page Inline tube adapter 

Tube adapter STL file ⌀ 250–60 mm (Length: 80 mm) (📦 #1843)

1 object(s) - format STL
Tube adapter STL file ⌀ 250–60 mm (Length: 80 mm)
Inline tube reducer ⌀250 mm to ⌀60 mm in STL format. Length of this reducer is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 20 mm
side A outer diameter 250 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 40 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 180–60 mm (Length: 150 mm) (📦 #1424)

1 object(s) - format STL
Tube adapter STL file ⌀ 180–60 mm (Length: 150 mm)
Straight sleeve ⌀180 mm to ⌀60 mm in STL 3D format. Final length of this junction is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 30 mm. The ends are raw.
Parameter Value Unit
side A length 50 mm
side A outer diameter 180 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 60 mm
side B thickness 3 mm
transition length 70 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 150–75 mm (Length: 150 mm) (📦 #1797)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 150–75 mm (Length: 150 mm)
Straight tube reducer ⌀150 mm to ⌀75 mm in STL format. Total length of this sleeve is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 40 mm
side A outer diameter 150 mm
side A thickness 3 mm
side B length 40 mm
side B outer diameter 75 mm
side B thickness 3 mm
transition length 70 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 180–16 mm (Length: 150 mm) (📦 #1423)

1 object(s) - format STL
Tube adapter STL file ⌀ 180–16 mm (Length: 150 mm)
Straight tube adapter ⌀180 mm to ⌀16 mm in STL format. Final length of this fitting is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 30 mm. The ends are not rounded.
Parameter Value Unit
side A length 50 mm
side A outer diameter 180 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 16 mm
side B thickness 3 mm
transition length 70 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 183–90 mm (Length: 117 mm) (📦 #1959)

1 object(s) - format STL
Tube adapter STL file ⌀ 183–90 mm (Length: 117 mm)
Tube adapter ⌀183 mm to ⌀90 mm in STL 3D format. Length of this sleeve is 117 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 17 mm. The ends are not rounded.
Parameter Value Unit
side A length 50 mm
side A outer diameter 183 mm
side A thickness 3 mm
side B length 17 mm
side B outer diameter 90 mm
side B thickness 3 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 245–106 mm (Length: 145 mm) (📦 #1930)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 245–106 mm (Length: 145 mm)
Inline tube junction ⌀245 mm to ⌀106 mm in STL format. Final length of this reducer is 145 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 70 mm, the smaller one of 5 mm. The ends have no fillet.
Parameter Value Unit
side A length 70 mm
side A outer diameter 245 mm
side A thickness 3 mm
side B length 5 mm
side B outer diameter 106 mm
side B thickness 3 mm
transition length 70 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 120–60 mm (Length: 80 mm) (📦 #1842)

1 object(s) - format STL
Tube adapter STL file ⌀ 120–60 mm (Length: 80 mm)
Tube fitting ⌀120 mm to ⌀60 mm in STL format. Total length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
Parameter Value Unit
side A length 20 mm
side A outer diameter 120 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 40 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 100–16 mm (Length: 140 mm) (📦 #1341)

1 object(s) - format STL
Tube adapter STL file ⌀ 100–16 mm (Length: 140 mm)
Inline tube coupler ⌀100 mm to ⌀16 mm in STL 3D format. Final length of this sleeve is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 30 mm. The ends are not rounded.
Parameter Value Unit
side A length 10 mm
side A outer diameter 100 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 16 mm
side B thickness 3 mm
transition length 100 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 200–50 mm (Length: 80 mm) (📦 #1483)

1 object(s) - format STL
Tube adapter STL file ⌀ 200–50 mm (Length: 80 mm)
Tube reducer ⌀200 mm to ⌀50 mm in STL 3D format. Total length of this junction is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 200 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 50 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 250–100 mm (Length: 80 mm) (📦 #1537)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 250–100 mm (Length: 80 mm)
Inline fitting ⌀250 mm to ⌀100 mm in STL format. Total length of this adapter is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 250 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 100 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 150–96 mm (Length: 150 mm) (📦 #1468)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 150–96 mm (Length: 150 mm)
Straight sleeve ⌀150 mm to ⌀96 mm in STL format. Length of this junction is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 150 mm
side A thickness 3 mm
side B length 50 mm
side B outer diameter 96 mm
side B thickness 3 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 150–75 mm (Length: 80 mm) (📦 #1758)

1 object(s) - format STL
Tube adapter STL file ⌀ 150–75 mm (Length: 80 mm)
Inline sleeve ⌀150 mm to ⌀75 mm in STL format. Final length of this fitting is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are rounded on the inside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 20 mm
side A outer diameter 150 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 75 mm
side B thickness 2 mm
transition length 40 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 100–16 mm (Length: 110 mm) (📦 #1342)

1 object(s) - format STL (4.7/5) 3 vote(s)
Tube adapter STL 3D file ⌀ 100–16 mm (Length: 110 mm)
Tube fitting ⌀100 mm to ⌀16 mm in STL 3D format. Length of this coupler is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 30 mm. The ends are raw.
Parameter Value Unit
side A length 10 mm
side A outer diameter 100 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 16 mm
side B thickness 3 mm
transition length 70 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 200–100 mm (Length: 80 mm) (📦 #1536)

1 object(s) - format STL
Tube adapter STL file ⌀ 200–100 mm (Length: 80 mm)
Inline fitting ⌀200 mm to ⌀100 mm in STL format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 200 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 100 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 82–61 mm (Length: 100 mm) (📦 #1969)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 82–61 mm (Length: 100 mm)
Inline fitting ⌀82 mm to ⌀61 mm in STL format. Total length of this connector is 100 mm. The larger-diameter tube has a thickness of 2 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 20 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 20 mm
side A outer diameter 82 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 61 mm
side B thickness 3 mm
transition length 60 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 150–5 mm (Length: 248 mm) (📦 #1705)

1 object(s) - format STL
Tube adapter STL file ⌀ 150–5 mm (Length: 248 mm)
Inline tube coupler ⌀150 mm to ⌀5 mm in STL 3D format. Final length of this sleeve is 248 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 60 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 38 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 60 mm
side A outer diameter 150 mm
side A thickness 2.5 mm
side B length 38 mm
side B outer diameter 5 mm
side B thickness 2 mm
transition length 150 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 158–118 mm (Length: 90 mm) (📦 #2318)

1 object(s) - format STL
Tube adapter STL file ⌀ 158–118 mm (Length: 90 mm)
Inline fitting ⌀158 mm to ⌀118 mm in STL format. Final length of this connector is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 158 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 118 mm
side B thickness 3 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 130–100 mm (Length: 70 mm) (📦 #1996)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 130–100 mm (Length: 70 mm)
Tube connector ⌀130 mm to ⌀100 mm in STL format. Final length of this sleeve is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 25 mm. The axes of the tubes are offset by 1 mm. The ends have no fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 130 mm
side A thickness 2 mm
side B length 25 mm
side B outer diameter 100 mm
side B thickness 2 mm
transition length 25 mm
axis offset 1 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 155–90 mm (Length: 90 mm) (📦 #1387)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 155–90 mm (Length: 90 mm)
Inline tube adapter ⌀155 mm to ⌀90 mm in STL 3D format. Length of this reducer is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 50 mm. The ends are rounded on the outside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 20 mm
side A outer diameter 155 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 90 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 125–100 mm (Length: 70 mm) (📦 #1883)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 125–100 mm (Length: 70 mm)
Inline tube junction ⌀125 mm to ⌀100 mm in STL 3D format. Length of this junction is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 25 mm. The axes of the tubes are off-center by 1 mm. The ends are not rounded.
Parameter Value Unit
side A length 20 mm
side A outer diameter 125 mm
side A thickness 2 mm
side B length 25 mm
side B outer diameter 100 mm
side B thickness 2 mm
transition length 25 mm
axis offset 1 mm
ends fillet no fillet

Tube adapter STL file ⌀ 153–90 mm (Length: 90 mm) (📦 #1380)

1 object(s) - format STL
Tube adapter STL file ⌀ 153–90 mm (Length: 90 mm)
Tube coupler ⌀153 mm to ⌀90 mm in STL 3D format. Total length of this sleeve is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 50 mm. The ends are rounded on the outside to ease the connection.
Parameter Value Unit
side A length 20 mm
side A outer diameter 153 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 90 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 150–90 mm (Length: 90 mm) (📦 #1378)

1 object(s) - format STL
Tube adapter STL file ⌀ 150–90 mm (Length: 90 mm)
Tube junction ⌀150 mm to ⌀90 mm in STL format. Total length of this reducer is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 50 mm. The ends feature an external fillet to make tube connection easier.
Parameter Value Unit
side A length 20 mm
side A outer diameter 150 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 90 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 90–68 mm (Length: 90 mm) (📦 #1188)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 90–68 mm (Length: 90 mm)
Tube connector ⌀90 mm to ⌀68 mm in STL 3D format. Final length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 30 mm. The two axes of the tubes are offset by 10 mm. The ends are not rounded.
Parameter Value Unit
side A length 15 mm
side A outer diameter 90 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 68 mm
side B thickness 2 mm
transition length 45 mm
axis offset 10 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 75–50 mm (Length: 100 mm) (📦 #1238)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 75–50 mm (Length: 100 mm)
Tube fitting ⌀75 mm to ⌀50 mm in STL format. Total length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are off-center by 12.4 mm. The ends have no fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 75 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 60 mm
axis offset 12.4 mm
ends fillet no fillet

Tube adapter STL file ⌀ 128–98 mm (Length: 71 mm) (📦 #1846)

1 object(s) - format STL
Tube adapter STL file ⌀ 128–98 mm (Length: 71 mm)
Inline tube coupler ⌀128 mm to ⌀98 mm in STL format. Final length of this adapter is 71 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 21 mm. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 128 mm
side A thickness 2 mm
side B length 21 mm
side B outer diameter 98 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–66 mm (Length: 120 mm) (📦 #1998)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–66 mm (Length: 120 mm)
Inline tube reducer ⌀80 mm to ⌀66 mm in STL 3D format. Final length of this sleeve is 120 mm. The larger-diameter tube has a thickness of 3 mm and a length of 40 mm. The smaller-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The ends have no fillet.
Parameter Value Unit
side A length 40 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 66 mm
side B thickness 2.5 mm
transition length 50 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 100–60 mm (Length: 180 mm) (📦 #1414)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 100–60 mm (Length: 180 mm)
Tube junction ⌀100 mm to ⌀60 mm in STL format. Total length of this junction is 180 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends feature an external fillet.
Parameter Value Unit
side A length 60 mm
side A outer diameter 100 mm
side A thickness 2 mm
side B length 60 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 60 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 120–80 mm (Length: 240 mm) (📦 #1400)

1 object(s) - format STL
Tube adapter STL file ⌀ 120–80 mm (Length: 240 mm)
Straight tube reducer ⌀120 mm to ⌀80 mm in STL 3D format. Length of this connector is 240 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are rounded on the inside.
Parameter Value Unit
side A length 50 mm
side A outer diameter 120 mm
side A thickness 3 mm
side B length 50 mm
side B outer diameter 80 mm
side B thickness 3 mm
transition length 140 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 116–100 mm (Length: 90 mm) (📦 #2153)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 116–100 mm (Length: 90 mm)
Straight tube fitting ⌀116 mm to ⌀100 mm in STL format. Final length of this reducer is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 116 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 100 mm
side B thickness 3 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 150–5 mm (Length: 280 mm) (📦 #1703)

1 object(s) - format STL
Tube adapter STL file ⌀ 150–5 mm (Length: 280 mm)
Straight tube reducer ⌀150 mm to ⌀5 mm in STL 3D format. Total length of this connector is 280 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 60 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 70 mm. The ends have a fillet on the outside.
Parameter Value Unit
side A length 60 mm
side A outer diameter 150 mm
side A thickness 2.5 mm
side B length 70 mm
side B outer diameter 5 mm
side B thickness 2 mm
transition length 150 mm
axis offset 0 mm
ends fillet fillet on th...