Tube adapter STL 3D file ⌀ 245–106 mm (Length: 145 mm) 📦#1930
Generation date: 2025-09-22
3D model download
Free- inline-tube-adapter-lenA70mm-d_model1930-nb0_dd{id}.stl : 4.1 Mo
STL
Mesh quality :
0.05
0.05
No compliance warranty
License: CC BY - Creative commons
(attribution - commercial use allowed)
Safe download
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | side A length | 70 mm |
| #2 | side A outer diameter | 245 mm |
| #3 | side A thickness | 3 mm |
| #4 | side B length | 5 mm |
| #5 | side B outer diameter | 106 mm |
| #6 | side B thickness | 3 mm |
| #7 | transition length | 70 mm |
| #8 | axis offset | 0 mm |
| #9 | ends fillet | no fillet |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 side A length | lenA |
| #2 side A outer diameter | diA |
| #3 side A thickness | thA |
| #4 side B length | lenB |
| #5 side B outer diameter | diB |
| #6 side B thickness | thB |
| #7 transition length | tra |
| #8 axis offset | ofs |
| #9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tube adapter STL file ⌀ 183–90 mm (Length: 117 mm) (📦 #1959)
1 object(s) - format STL
Tube adapter ⌀183 mm to ⌀90 mm in STL 3D format. Length of this sleeve is 117 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 17 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 183 | mm |
| side A thickness | 3 | mm |
| side B length | 17 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 3 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 180–60 mm (Length: 150 mm) (📦 #1424)
1 object(s) - format STL
Straight sleeve ⌀180 mm to ⌀60 mm in STL 3D format. Final length of this junction is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 30 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 180 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 150–96 mm (Length: 150 mm) (📦 #1468)
1 object(s) - format STL
Straight sleeve ⌀150 mm to ⌀96 mm in STL format. Length of this junction is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 96 | mm |
| side B thickness | 3 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 150–75 mm (Length: 150 mm) (📦 #1797)
1 object(s) - format STL
Straight tube reducer ⌀150 mm to ⌀75 mm in STL format. Total length of this sleeve is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 250–100 mm (Length: 80 mm) (📦 #1537)
1 object(s) - format STL
Inline fitting ⌀250 mm to ⌀100 mm in STL format. Total length of this adapter is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 250 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 240–106 mm (Length: 160 mm) (📦 #1932)
1 object(s) - format STL
Straight tube connector ⌀240 mm to ⌀106 mm in STL format. Length of this fitting is 160 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 70 mm, the smaller one of 70 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 70 | mm |
| side A outer diameter | 240 | mm |
| side A thickness | 3 | mm |
| side B length | 70 | mm |
| side B outer diameter | 106 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 200–100 mm (Length: 80 mm) (📦 #1536)
1 object(s) - format STL
Inline fitting ⌀200 mm to ⌀100 mm in STL format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 200 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 230–106 mm (Length: 160 mm) (📦 #1933)
1 object(s) - format STL
Tube reducer ⌀230 mm to ⌀106 mm in STL 3D format. Total length of this sleeve is 160 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 70 mm, the smaller one of 70 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 70 | mm |
| side A outer diameter | 230 | mm |
| side A thickness | 3 | mm |
| side B length | 70 | mm |
| side B outer diameter | 106 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 158–118 mm (Length: 90 mm) (📦 #2318)
1 object(s) - format STL
Inline fitting ⌀158 mm to ⌀118 mm in STL format. Final length of this connector is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 158 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 118 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 250–60 mm (Length: 80 mm) (📦 #1843)
1 object(s) - format STL
Inline tube reducer ⌀250 mm to ⌀60 mm in STL format. Length of this reducer is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 250 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 250–60 mm (Length: 140 mm) (📦 #1844)
1 object(s) - format STL
Tube connector ⌀250 mm to ⌀60 mm in STL 3D format. Length of this fitting is 140 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 250 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 2 | mm |
| transition length | 100 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 180–16 mm (Length: 150 mm) (📦 #1423)
1 object(s) - format STL
Straight tube adapter ⌀180 mm to ⌀16 mm in STL format. Final length of this fitting is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 30 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 180 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 16 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 245–106 mm (Length: 145 mm) (📦 #1931)
1 object(s) - format STL
Straight tube connector ⌀245 mm to ⌀106 mm in STL format. Final length of this sleeve is 145 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 70 mm, the smaller one of 70 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 70 | mm |
| side A outer diameter | 245 | mm |
| side A thickness | 3 | mm |
| side B length | 70 | mm |
| side B outer diameter | 106 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 200–50 mm (Length: 80 mm) (📦 #1483)
1 object(s) - format STL
Tube reducer ⌀200 mm to ⌀50 mm in STL 3D format. Total length of this junction is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 200 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 159–117 mm (Length: 105 mm) (📦 #2291)
1 object(s) - format STL
Straight sleeve ⌀159 mm to ⌀117 mm in STL format. Total length of this sleeve is 105 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 159 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 117 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 103–90 mm (Length: 150 mm) (📦 #1767)
1 object(s) - format STL
Inline tube coupler ⌀103 mm to ⌀90 mm in STL format. Final length of this sleeve is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 70 mm, the smaller one of 50 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 70 | mm |
| side A outer diameter | 103 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 116–100 mm (Length: 90 mm) (📦 #2153)
1 object(s) - format STL
Straight tube fitting ⌀116 mm to ⌀100 mm in STL format. Final length of this reducer is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 116 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 160–110 mm (Length: 65 mm) (📦 #2288)
1 object(s) - format STL
Tube adapter ⌀160 mm to ⌀110 mm in STL 3D format. Total length of this fitting is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 160 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 110 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 158–118 mm (Length: 65 mm) (📦 #2289)
1 object(s) - format STL
Tube adapter ⌀158 mm to ⌀118 mm in STL format. Final length of this fitting is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 158 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 118 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 200–180 mm (Length: 80 mm) (📦 #1161)
1 object(s) - format STL
Tube reducer ⌀200 mm to ⌀180 mm in STL format. Final length of this fitting is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 200 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 180 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 157–117 mm (Length: 65 mm) (📦 #2290)
1 object(s) - format STL
Tube connector ⌀157 mm to ⌀117 mm in STL 3D format. Total length of this fitting is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 157 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 117 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 128–98 mm (Length: 71 mm) (📦 #1846)
1 object(s) - format STL
Inline tube coupler ⌀128 mm to ⌀98 mm in STL format. Final length of this adapter is 71 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 21 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 128 | mm |
| side A thickness | 2 | mm |
| side B length | 21 | mm |
| side B outer diameter | 98 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 140–93 mm (Length: 110 mm) (📦 #1432)
1 object(s) - format STL
Tube connector ⌀140 mm to ⌀93 mm in STL 3D format. Length of this adapter is 110 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 140 | mm |
| side A thickness | 5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 93 | mm |
| side B thickness | 5 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 102–90 mm (Length: 150 mm) (📦 #1768)
1 object(s) - format STL
Diameter adapter ⌀102 mm to ⌀90 mm in STL 3D format. Length of this sleeve is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 70 mm, the smaller one of 50 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 70 | mm |
| side A outer diameter | 102 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 116–100 mm (Length: 113 mm) (📦 #1868)
1 object(s) - format STL
Tube adapter ⌀116 mm to ⌀100 mm in STL 3D format. Length of this junction is 113 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 116 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 3 | mm |
| transition length | 13 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 140–120 mm (Length: 60 mm) (📦 #1207)
1 object(s) - format STL
Tube fitting ⌀140 mm to ⌀120 mm in STL 3D format. Final length of this sleeve is 60 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 140 | mm |
| side A thickness | 4 | mm |
| side B length | 20 | mm |
| side B outer diameter | 120 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 130–100 mm (Length: 70 mm) (📦 #1996)
1 object(s) - format STL
Tube connector ⌀130 mm to ⌀100 mm in STL format. Final length of this sleeve is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 25 mm. The axes of the tubes are offset by 1 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 130 | mm |
| side A thickness | 2 | mm |
| side B length | 25 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 2 | mm |
| transition length | 25 | mm |
| axis offset | 1 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 135–100 mm (Length: 140 mm) (📦 #1463)
1 object(s) - format STL
Tube adapter ⌀135 mm to ⌀100 mm in STL 3D format. Length of this coupler is 140 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends feature an external fillet to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 135 | mm |
| side A thickness | 5 | mm |
| side B length | 50 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 5 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 80–66 mm (Length: 120 mm) (📦 #1998)
1 object(s) - format STL
Inline tube reducer ⌀80 mm to ⌀66 mm in STL 3D format. Final length of this sleeve is 120 mm. The larger-diameter tube has a thickness of 3 mm and a length of 40 mm. The smaller-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 66 | mm |
| side B thickness | 2.5 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 125–100 mm (Length: 70 mm) (📦 #1883)
1 object(s) - format STL
Inline tube junction ⌀125 mm to ⌀100 mm in STL 3D format. Length of this junction is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 25 mm. The axes of the tubes are off-center by 1 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 125 | mm |
| side A thickness | 2 | mm |
| side B length | 25 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 2 | mm |
| transition length | 25 | mm |
| axis offset | 1 | mm |
| ends fillet | no fillet |