Tube adapter ⌀ 147–75 mm (Length: 180 mm) 📦#1237

Download 1 object(s) STL
Create a new model:
from scratch
Straight tube connector ⌀147 mm to ⌀75 mm in STL format. Length of this reducer is 180 mm. The thickness of the tubes is identical: 2 mm. The two axes of the tubes are offset. The ends are not rounded.
Generation date: 2025-07-20
3D Model Tube adapter ⌀ 147–75 mm (Length: 180 mm)

3D model download

  • inline-tube-adapter-lenA20mm-d_model1237-nb0_dd{id}.stl : 197 Ko
(attribution - commercial use allowed)
Free download
Please answer the anti-robot question:
🥥🥥🥥🥥🥥🥥🍌🥥🥝

Values for this model

Parameter Value Unit Label
#1 side A length 20 mm lenA
#2 side A outer diameter 147 mm diA
#3 side A thickness 2 mm thA
#4 side B length 40 mm lenB
#5 side B outer diameter 75 mm diB
#6 side B thickness 2 mm thB
#7 transition length 120 mm tra
#8 axis offset 35.9 mm ofs
#9 ends fillet 0 0,1,2,3 fil
illustration of the parameters
Representation of the parameters

The transition refers to the connection interface between the two tubes. It defines the total length of the adapter, which is equal to the sum of the tube lengths plus the length of the transition.

Details for parameter #9 ends fillet:

  • 0: no fillet
  • 1: fillet on the outside
  • 2: fillet on the inside
  • 3: fillet on both inside and outside

Related 3D models

To search for a model based on your own parameters, go to the template page Inline tube adapter 

📦 3D model #1120

1 object(s) - format STL (5.0/5) 1 vote(s)
Tube adapter ⌀ 85–29 mm (Length: 180 mm)
Tube adapter ⌀ 85–29 mm (Length: 180 mm)
Straight tube reducer ⌀85 mm to ⌀29 mm in STL format. Length of this reducer is 180 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends are raw.
Parameter Value Unit
side A length40mm
side A outer diameter85mm
side A thickness2mm
side B length40mm
side B outer diameter29mm
side B thickness2mm
transition length100mm
axis offset27mm
ends fillet00,1,2,3

📦 3D model #1119

1 object(s) - format STL
Tube adapter ⌀ 85–29 mm (Length: 140 mm)
Tube adapter ⌀ 85–29 mm (Length: 140 mm)
Tube connector ⌀85 mm to ⌀29 mm in STL format. Total length of this sleeve is 140 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends have no fillet.
Parameter Value Unit
side A length20mm
side A outer diameter85mm
side A thickness2mm
side B length20mm
side B outer diameter29mm
side B thickness2mm
transition length100mm
axis offset27mm
ends fillet00,1,2,3

📦 3D model #1151

1 object(s) - format STL
Tube adapter ⌀ 147–49.9 mm (Length: 140 mm)
Tube adapter ⌀ 147–49.9 mm (Length: 140 mm)
Diameter adapter ⌀147 mm to ⌀49.9 mm in STL format. Length of this adapter is 140 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are offset. The ends feature an external fillet to make tube connection easier.
Parameter Value Unit
side A length30mm
side A outer diameter147mm
side A thickness2mm
side B length40mm
side B outer diameter49.9mm
side B thickness2mm
transition length70mm
axis offset48mm
ends fillet10,1,2,3

📦 3D model #1238

1 object(s) - format STL
Tube adapter ⌀ 75–50 mm (Length: 100 mm)
Tube adapter ⌀ 75–50 mm (Length: 100 mm)
Tube adapter ⌀75 mm to ⌀50 mm in STL format. Length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends are not rounded.
Parameter Value Unit
side A length20mm
side A outer diameter75mm
side A thickness2mm
side B length20mm
side B outer diameter50mm
side B thickness2mm
transition length60mm
axis offset12.4mm
ends fillet00,1,2,3

📦 3D model #1188

1 object(s) - format STL
Tube adapter ⌀ 90–68 mm (Length: 90 mm)
Tube adapter ⌀ 90–68 mm (Length: 90 mm)
Inline tube coupler ⌀90 mm to ⌀68 mm in STL format. Length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are offset. The ends are raw.
Parameter Value Unit
side A length15mm
side A outer diameter90mm
side A thickness2mm
side B length30mm
side B outer diameter68mm
side B thickness2mm
transition length45mm
axis offset10mm
ends fillet00,1,2,3

📦 3D model #1100

1 object(s) - format STL
Tube adapter ⌀ 60–30 mm (Length: 140 mm)
Tube adapter ⌀ 60–30 mm (Length: 140 mm)
Inline tube reducer ⌀60 mm to ⌀30 mm in STL format. Total length of this sleeve is 140 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 3 mm. The two axes of the tubes are offset. The ends are raw.
Parameter Value Unit
side A length20mm
side A outer diameter60mm
side A thickness4mm
side B length20mm
side B outer diameter30mm
side B thickness3mm
transition length100mm
axis offset13.9mm
ends fillet00,1,2,3

📦 3D model #1115

1 object(s) - format STL (5.0/5) 1 vote(s)
Tube adapter ⌀ 100–60 mm (Length: 70 mm)
Tube adapter ⌀ 100–60 mm (Length: 70 mm)
Diameter adapter ⌀100 mm to ⌀60 mm in STL format. Total length of this coupler is 70 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends have a fillet on the outside.
Parameter Value Unit
side A length10mm
side A outer diameter100mm
side A thickness2mm
side B length20mm
side B outer diameter60mm
side B thickness2mm
transition length40mm
axis offset15mm
ends fillet10,1,2,3

📦 3D model #1217

1 object(s) - format STL
Tube adapter ⌀ 140–100 mm (Length: 80 mm)
Tube adapter ⌀ 140–100 mm (Length: 80 mm)
Straight tube fitting ⌀140 mm to ⌀100 mm in STL format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The two axes of the tubes are offset. The ends are raw.
Parameter Value Unit
side A length20mm
side A outer diameter140mm
side A thickness3mm
side B length30mm
side B outer diameter100mm
side B thickness3mm
transition length30mm
axis offset19.9mm
ends fillet00,1,2,3

📦 3D model #1166

1 object(s) - format STL (4.5/5) 2 vote(s)
Tube adapter ⌀ 80–70 mm (Length: 80 mm)
Tube adapter ⌀ 80–70 mm (Length: 80 mm)
Diameter adapter ⌀80 mm to ⌀70 mm in STL format. Final length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The axes of the tubes are offset. The ends are not rounded.
Parameter Value Unit
side A length30mm
side A outer diameter80mm
side A thickness3mm
side B length30mm
side B outer diameter70mm
side B thickness3mm
transition length20mm
axis offset4.9mm
ends fillet00,1,2,3

📦 3D model #1218

1 object(s) - format STL
Tube adapter ⌀ 80–75 mm (Length: 111 mm)
Tube adapter ⌀ 80–75 mm (Length: 111 mm)
Inline fitting ⌀80 mm to ⌀75 mm in STL format. Total length of this sleeve is 111 mm. The thickness of the tubes is identical: 2.5 mm. The axes of the tubes are offset. The ends have a fillet on the outside.
Parameter Value Unit
side A length46mm
side A outer diameter80mm
side A thickness2.5mm
side B length45mm
side B outer diameter75mm
side B thickness2.5mm
transition length20mm
axis offset2.4mm
ends fillet10,1,2,3

📦 3D model #1213

1 object(s) - format STL
Tube adapter ⌀ 80–75 mm (Length: 115 mm)
Tube adapter ⌀ 80–75 mm (Length: 115 mm)
Inline tube reducer ⌀80 mm to ⌀75 mm in STL format. Final length of this reducer is 115 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends are raw.
Parameter Value Unit
side A length50mm
side A outer diameter80mm
side A thickness2mm
side B length50mm
side B outer diameter75mm
side B thickness2mm
transition length15mm
axis offset2.4mm
ends fillet00,1,2,3

📦 3D model #1288

1 object(s) - format STL (5.0/5) 2 vote(s)
Tube adapter ⌀ 149–100 mm (Length: 200 mm)
Tube adapter ⌀ 149–100 mm (Length: 200 mm)
Straight tube adapter ⌀149 mm to ⌀100 mm in STL format. Final length of this junction is 200 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length50mm
side A outer diameter149mm
side A thickness2mm
side B length100mm
side B outer diameter100mm
side B thickness2mm
transition length50mm
axis offset0mm
ends fillet10,1,2,3

📦 3D model #1272

1 object(s) - format STL
Tube adapter ⌀ 45–15 mm (Length: 90 mm)
Tube adapter ⌀ 45–15 mm (Length: 90 mm)
Inline sleeve ⌀45 mm to ⌀15 mm in STL format. Length of this junction is 90 mm. The thickness of the larger diameter tube is 2.5 mm, and the smaller one is 2 mm. The ends are raw.
Parameter Value Unit
side A length30mm
side A outer diameter45mm
side A thickness2.5mm
side B length30mm
side B outer diameter15mm
side B thickness2mm
transition length30mm
axis offset0mm
ends fillet00,1,2,3

📦 3D model #1163

1 object(s) - format STL
Tube adapter ⌀ 80–50 mm (Length: 80 mm)
Tube adapter ⌀ 80–50 mm (Length: 80 mm)
Tube reducer ⌀80 mm to ⌀50 mm in STL format. Length of this fitting is 80 mm. The thickness of the tubes is identical: 3 mm. The ends have no fillet.
Parameter Value Unit
side A length30mm
side A outer diameter80mm
side A thickness3mm
side B length30mm
side B outer diameter50mm
side B thickness3mm
transition length20mm
axis offset0mm
ends fillet00,1,2,3

📦 3D model #1270

1 object(s) - format STL
Tube adapter ⌀ 44–16 mm (Length: 90 mm)
Tube adapter ⌀ 44–16 mm (Length: 90 mm)
Tube connector ⌀44 mm to ⌀16 mm in STL format. Length of this connector is 90 mm. The thickness of the larger diameter tube is 2.5 mm, and the smaller one is 2 mm. The ends have no fillet.
Parameter Value Unit
side A length30mm
side A outer diameter44mm
side A thickness2.5mm
side B length30mm
side B outer diameter16mm
side B thickness2mm
transition length30mm
axis offset0mm
ends fillet00,1,2,3

📦 3D model #1260

1 object(s) - format STL (4.0/5) 1 vote(s)
Tube adapter ⌀ 45–10 mm (Length: 90 mm)
Tube adapter ⌀ 45–10 mm (Length: 90 mm)
Inline sleeve ⌀45 mm to ⌀10 mm in STL format. Final length of this junction is 90 mm. The thickness of the larger diameter tube is 2.5 mm, and the smaller one is 2 mm. The ends have no fillet.
Parameter Value Unit
side A length30mm
side A outer diameter45mm
side A thickness2.5mm
side B length30mm
side B outer diameter10mm
side B thickness2mm
transition length30mm
axis offset0mm
ends fillet00,1,2,3

📦 3D model #1271

1 object(s) - format STL
Tube adapter ⌀ 45–9 mm (Length: 90 mm)
Tube adapter ⌀ 45–9 mm (Length: 90 mm)
Tube reducer ⌀45 mm to ⌀9 mm in STL format. Final length of this coupler is 90 mm. The thickness of the larger diameter tube is 2.5 mm, and the smaller one is 2 mm. The ends are raw.
Parameter Value Unit
side A length30mm
side A outer diameter45mm
side A thickness2.5mm
side B length30mm
side B outer diameter9mm
side B thickness2mm
transition length30mm
axis offset0mm
ends fillet00,1,2,3

📦 3D model #1220

1 object(s) - format STL
Tube adapter ⌀ 80–75 mm (Length: 100 mm)
Tube adapter ⌀ 80–75 mm (Length: 100 mm)
Tube junction ⌀80 mm to ⌀75 mm in STL format. Final length of this adapter is 100 mm. The thickness of the tubes is identical: 2.5 mm. The axes of the tubes are offset. The ends are rounded on the outside to ease the connection.
Parameter Value Unit
side A length45mm
side A outer diameter80mm
side A thickness2.5mm
side B length45mm
side B outer diameter75mm
side B thickness2.5mm
transition length10mm
axis offset2.4mm
ends fillet10,1,2,3

📦 3D model #1215

1 object(s) - format STL
Tube adapter ⌀ 86–81 mm (Length: 111 mm)
Tube adapter ⌀ 86–81 mm (Length: 111 mm)
Inline tube junction ⌀86 mm to ⌀81 mm in STL format. Final length of this adapter is 111 mm. The thickness of the tubes is identical: 3 mm. The ends are rounded on the outside to ease the connection.
Parameter Value Unit
side A length46mm
side A outer diameter86mm
side A thickness3mm
side B length45mm
side B outer diameter81mm
side B thickness3mm
transition length20mm
axis offset0mm
ends fillet10,1,2,3

📦 3D model #1219

1 object(s) - format STL
Tube adapter ⌀ 80–75 mm (Length: 101 mm)
Tube adapter ⌀ 80–75 mm (Length: 101 mm)
Diameter adapter ⌀80 mm to ⌀75 mm in STL format. Final length of this adapter is 101 mm. The thickness of the tubes is identical: 2.5 mm. The axes of the tubes are offset. The ends are rounded on the outside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length46mm
side A outer diameter80mm
side A thickness2.5mm
side B length45mm
side B outer diameter75mm
side B thickness2.5mm
transition length10mm
axis offset2.4mm
ends fillet10,1,2,3