Tube adapter ⌀ 147–49.9 mm (Length: 140 mm) 📦#1151
Generation date: 2025-07-08
3D model download
Free- inline-tube-adapter-lenA30mm-d_model1151-nb0_dd{id}.stl : 11.4 Mo
STL
Mesh quality :
not defined
License: CC BY - Creative commons
(attribution - commercial use allowed)
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Template parameter | Value | Unit | Label | |
|---|---|---|---|---|
| #1 | side A length | 30 | mm | lenA |
| #2 | side A outer diameter | 147 | mm | diA |
| #3 | side A thickness | 2 | mm | thA |
| #4 | side B length | 40 | mm | lenB |
| #5 | side B outer diameter | 49.9 | mm | diB |
| #6 | side B thickness | 2 | mm | thB |
| #7 | transition length | 70 | mm | tra |
| #8 | axis offset | 48 | mm | ofs |
| #9 | ends fillet | 1 | 0,1,2,3 | fil |
Representation of the parameters
The transition refers to the connection interface between the two tubes. It defines the total length of the adapter, which is equal to the sum of the tube lengths plus the length of the transition.
Details for parameter #9 ends fillet:
- 0: no fillet
- 1: fillet on the outside
- 2: fillet on the inside
- 3: fillet on both inside and outside
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tube adapter ⌀ 147–75 mm (Length: 180 mm) (📦 #1237)
1 object(s) - format STL
Straight tube connector ⌀147 mm to ⌀75 mm in STL format. Length of this reducer is 180 mm. The thickness of the tubes is identical: 2 mm. The two axes of the tubes are offset. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 147 | mm |
| side A thickness | 2 | mm |
| side B length | 40 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2 | mm |
| transition length | 120 | mm |
| axis offset | 35.9 | mm |
| ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 104–50 mm (Length: 85 mm) (📦 #1458)
1 object(s) - format STL
Diameter adapter ⌀104 mm to ⌀50 mm in STL format. Total length of this sleeve is 85 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends are rounded on the inside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 104 | mm |
| side A thickness | 2 | mm |
| side B length | 25 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 26.9 | mm |
| ends fillet | 2 | 0,1,2,3 |
Tube adapter ⌀ 85–29 mm (Length: 180 mm) (📦 #1120)
1 object(s) - format STL (5.0/5) 1 vote(s)
Straight tube reducer ⌀85 mm to ⌀29 mm in STL format. Length of this reducer is 180 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 2 | mm |
| side B length | 40 | mm |
| side B outer diameter | 29 | mm |
| side B thickness | 2 | mm |
| transition length | 100 | mm |
| axis offset | 27 | mm |
| ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 104–50 mm (Length: 85 mm) (📦 #1457)
1 object(s) - format STL
Tube junction ⌀104 mm to ⌀50 mm in STL format. Length of this adapter is 85 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends feature an internal fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 104 | mm |
| side A thickness | 2 | mm |
| side B length | 25 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 26 | mm |
| ends fillet | 2 | 0,1,2,3 |
Tube adapter ⌀ 104–50 mm (Length: 85 mm) (📦 #1456)
1 object(s) - format STL
Inline tube junction ⌀104 mm to ⌀50 mm in STL format. Length of this sleeve is 85 mm. The thickness of the tubes is identical: 2 mm. The two axes of the tubes are off-center. The ends are rounded on the inside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 104 | mm |
| side A thickness | 2 | mm |
| side B length | 25 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 25.4 | mm |
| ends fillet | 2 | 0,1,2,3 |
Tube adapter ⌀ 85–29 mm (Length: 140 mm) (📦 #1119)
1 object(s) - format STL
Tube connector ⌀85 mm to ⌀29 mm in STL format. Total length of this sleeve is 140 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 29 | mm |
| side B thickness | 2 | mm |
| transition length | 100 | mm |
| axis offset | 27 | mm |
| ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 100–50 mm (Length: 90 mm) (📦 #1455)
1 object(s) - format STL
Tube fitting ⌀100 mm to ⌀50 mm in STL format. Final length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends are rounded on the inside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 24.9 | mm |
| ends fillet | 2 | 0,1,2,3 |
Tube adapter ⌀ 100–60 mm (Length: 70 mm) (📦 #1115)
1 object(s) - format STL (5.0/5) 2 vote(s)
Diameter adapter ⌀100 mm to ⌀60 mm in STL format. Total length of this coupler is 70 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends have a fillet on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 15 | mm |
| ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 140–100 mm (Length: 80 mm) (📦 #1217)
1 object(s) - format STL
Straight tube fitting ⌀140 mm to ⌀100 mm in STL format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The two axes of the tubes are offset. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 140 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 19.9 | mm |
| ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 100–51 mm (Length: 160 mm) (📦 #1340)
1 object(s) - format STL
Tube junction ⌀100 mm to ⌀51 mm in STL format. Final length of this adapter is 160 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 5 mm. The two axes of the tubes are offset. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 51 | mm |
| side B thickness | 5 | mm |
| transition length | 60 | mm |
| axis offset | 25.4 | mm |
| ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 61–12 mm (Length: 95 mm) (📦 #1339)
1 object(s) - format STL (5.0/5) 1 vote(s)
Inline tube reducer ⌀61 mm to ⌀12 mm in STL format. Final length of this fitting is 95 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 61 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 12 | mm |
| side B thickness | 2 | mm |
| transition length | 50 | mm |
| axis offset | 20 | mm |
| ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 61–12 mm (Length: 90 mm) (📦 #1325)
1 object(s) - format STL
Tube adapter ⌀61 mm to ⌀12 mm in STL format. Length of this adapter is 90 mm. The thickness of the tubes is identical: 2 mm. The two axes of the tubes are offset. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 61 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 12 | mm |
| side B thickness | 2 | mm |
| transition length | 50 | mm |
| axis offset | 20 | mm |
| ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 100–50 mm (Length: 140 mm) (📦 #1449)
1 object(s) - format STL
Inline tube reducer ⌀100 mm to ⌀50 mm in STL format. Final length of this junction is 140 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 5 mm. The axes of the tubes are off-center. The ends are rounded to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 5 | mm |
| transition length | 60 | mm |
| axis offset | 25.4 | mm |
| ends fillet | 3 | 0,1,2,3 |
Tube adapter ⌀ 75–50 mm (Length: 100 mm) (📦 #1238)
1 object(s) - format STL
Tube adapter ⌀75 mm to ⌀50 mm in STL format. Length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 75 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 60 | mm |
| axis offset | 12.4 | mm |
| ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 100–50 mm (Length: 160 mm) (📦 #1448)
1 object(s) - format STL
Tube adapter ⌀100 mm to ⌀50 mm in STL format. Total length of this sleeve is 160 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 5 mm. The two axes of the tubes are offset. The ends are rounded to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 5 | mm |
| transition length | 60 | mm |
| axis offset | 25.4 | mm |
| ends fillet | 3 | 0,1,2,3 |
Tube adapter ⌀ 100–51 mm (Length: 160 mm) (📦 #1098)
1 object(s) - format STL
Tube junction ⌀100 mm to ⌀51 mm in STL format. Length of this sleeve is 160 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 5 mm. The two axes of the tubes are off-center. The ends have a fillet to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 51 | mm |
| side B thickness | 5 | mm |
| transition length | 60 | mm |
| axis offset | 25.4 | mm |
| ends fillet | 3 | 0,1,2,3 |
Tube adapter ⌀ 90–68 mm (Length: 90 mm) (📦 #1188)
1 object(s) - format STL
Inline tube coupler ⌀90 mm to ⌀68 mm in STL format. Length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are offset. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 90 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 68 | mm |
| side B thickness | 2 | mm |
| transition length | 45 | mm |
| axis offset | 10 | mm |
| ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 149.6–99.6 mm (Length: 80 mm) (📦 #1096)
1 object(s) - format STL (5.0/5) 2 vote(s)
Tube connector ⌀149.6 mm to ⌀99.6 mm in STL format. Total length of this adapter is 80 mm. The thickness of the tubes is identical: 4 mm. The two axes of the tubes are offset. The ends have a fillet to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 14... | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 99.6 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 24.9 | mm |
| ends fillet | 3 | 0,1,2,3 |
Tube adapter ⌀ 92–71 mm (Length: 90 mm) (📦 #1371)
1 object(s) - format STL
Straight tube coupler ⌀92 mm to ⌀71 mm in STL format. Total length of this connector is 90 mm. The thickness of the larger diameter tube is 3 mm, and the smaller one is 2 mm. The two axes of the tubes are offset. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 92 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 71 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 9.1 | mm |
| ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 149.6–99.6 mm (Length: 80 mm) (📦 #1095)
1 object(s) - format STL
Tube fitting ⌀149.6 mm to ⌀99.6 mm in STL format. Final length of this sleeve is 80 mm. The thickness of the tubes is identical: 4 mm. The axes of the tubes are offset. The ends are rounded to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 14... | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 99.6 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 20 | mm |
| ends fillet | 3 | 0,1,2,3 |
Tube adapter ⌀ 60–30 mm (Length: 140 mm) (📦 #1100)
1 object(s) - format STL (5.0/5) 2 vote(s)
Inline tube reducer ⌀60 mm to ⌀30 mm in STL format. Total length of this sleeve is 140 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 3 mm. The two axes of the tubes are offset. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 4 | mm |
| side B length | 20 | mm |
| side B outer diameter | 30 | mm |
| side B thickness | 3 | mm |
| transition length | 100 | mm |
| axis offset | 13.9 | mm |
| ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 85–70 mm (Length: 80 mm) (📦 #1321)
1 object(s) - format STL
Diameter adapter ⌀85 mm to ⌀70 mm in STL format. Length of this junction is 80 mm. The thickness of the tubes is identical: 3 mm. The axes of the tubes are off-center. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 70 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 7.4 | mm |
| ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 102–90 mm (Length: 80 mm) (📦 #1382)
1 object(s) - format STL
Inline tube reducer ⌀102 mm to ⌀90 mm in STL format. Total length of this reducer is 80 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are offset. The ends feature an external fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 102 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 10 | mm |
| axis offset | 5.9 | mm |
| ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 100–60 mm (Length: 180 mm) (📦 #1414)
1 object(s) - format STL
Straight tube coupler ⌀100 mm to ⌀60 mm in STL format. Length of this connector is 180 mm. The thickness of the tubes is identical: 2 mm. The ends are rounded on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 60 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 2 | mm |
| transition length | 60 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 180–60 mm (Length: 150 mm) (📦 #1424)
1 object(s) - format STL
Inline tube junction ⌀180 mm to ⌀60 mm in STL format. Total length of this adapter is 150 mm. The thickness of the tubes is identical: 3 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 180 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 100–50 mm (Length: 100 mm) (📦 #1451)
1 object(s) - format STL
Tube connector ⌀100 mm to ⌀50 mm in STL format. Total length of this adapter is 100 mm. The thickness of the tubes is identical: 2 mm. The ends feature an internal fillet to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 2 | 0,1,2,3 |
Tube adapter ⌀ 150–120 mm (Length: 108 mm) (📦 #1105)
1 object(s) - format STL
Tube adapter ⌀150 mm to ⌀120 mm in STL format. Total length of this sleeve is 108 mm. The thickness of the tubes is identical: 5 mm. The axes of the tubes are offset. The ends are rounded on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 22.5 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 5 | mm |
| side B length | 35.5 | mm |
| side B outer diameter | 120 | mm |
| side B thickness | 5 | mm |
| transition length | 50 | mm |
| axis offset | 14 | mm |
| ends fillet | 1 | 0,1,2,3 |
Tube adapter ⌀ 80–70 mm (Length: 80 mm) (📦 #1166)
1 object(s) - format STL (4.5/5) 2 vote(s)
Diameter adapter ⌀80 mm to ⌀70 mm in STL format. Final length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The axes of the tubes are offset. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 70 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 4.9 | mm |
| ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 180–16 mm (Length: 150 mm) (📦 #1423)
1 object(s) - format STL
Tube junction ⌀180 mm to ⌀16 mm in STL format. Final length of this reducer is 150 mm. The thickness of the tubes is identical: 3 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 180 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 16 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 | 0,1,2,3 |
Tube adapter ⌀ 100–50 mm (Length: 90 mm) (📦 #1454)
1 object(s) - format STL
Diameter adapter ⌀100 mm to ⌀50 mm in STL format. Final length of this sleeve is 90 mm. The thickness of the tubes is identical: 2 mm. The ends are rounded on the inside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | 2 | 0,1,2,3 |