Custom Oval hose adapter STL file 110.1x110 mm to 180x40 mm – transition: 70 mm 📦#10646

STL 3D file for an oval coupling. The internal cross-section on side A is 90.1x90 mm (nearly circular), while on side B it is 100x40 mm (oval). On side A, the sleeve is 50 mm long, and on side B 20 mm. The transition section is 100 mm long, for a final overall length of 170 mm. The ends are straight, with no chamfer at all. Side B is offset by 30 mm along the Y axis and 30 mm along the Z axis relative to side A.

Oval duct adapter provided as a STL 3D file. On side A, the internal cross-section is 110.1x110 mm (nearly circular), whereas on side B it is 180x40 mm (oval). The sleeves on sides A and B have the same useful length of 40 mm. The central transition occupies 70 mm, bringing the overall length to 150 mm. External chamfers at the ends help with engagement and assembly within the duct system. Compared to side A, side B is shifted by 35 mm along the Y axis.

Oval adapter provided as a STL 3D file. The internal cross-section on side A is 110.1x110 mm (nearly circular), while on side B it is 180x40 mm (oval). The useful length is consistent on both ends: 40 mm. Between the two sleeves, the transition runs over 70 mm, resulting in an overall length of 150 mm. Internal chamfers are added at the ends to make assembly and duct insertion easier. Side B is offset by 35 mm along the Z axis relative to side A.

Oval coupling in STL 3D file format. On side A, the internal cross-section is 121x120.5 mm (nearly circular), whereas on side B it is 90x53 mm (oval). The sleeve on side A provides a useful length of 25 mm, and on side B 30 mm. The transition section is 63 mm long, for a final overall length of 118 mm. Internal chamfers at the ends improve assembly and make insertion smoother. An offset of 31.5 mm along the Z axis is applied to side B relative to side A.

Oval duct coupling provided as a STL 3D file. The internal cross-sections on sides A and B are identical, 60x20 mm. The useful length is consistent on both ends: 15 mm. The central transition occupies 140 mm, bringing the overall length to 170 mm. The ends are left without chamfers, with raw inner and outer edges. Side B is offset by 40 mm along the Y axis and 70 mm along the Z axis relative to side A.

STL 3D file for an oval duct coupling. On side A, the internal cross-section is 220x100 mm, whereas on side B it is 185x55 mm. The sleeve on side A provides a useful length of 5 mm, and on side B 6 mm. The transition links the two ends over 24 mm, with a total overall length of 35 mm. A thickness of 1 mm provides a very light, thin shell. The external chamfers improve fit when inserting the adapter into ducts or hoses. Compared to side A, side B is shifted by 11 mm along the Y axis and 11 mm along the Z axis.

STL 3D file for an oval duct transition adapter. The internal cross-sections on sides A and B are identical, 60x20 mm. The useful length is consistent on both ends: 15 mm. Between the two sleeves, the transition runs over 140 mm, resulting in an overall length of 170 mm. Both the inner and outer edges at the ends remain unchamfered. An offset of 40 mm along the Y axis and 70 mm along the Z axis is applied to side B relative to side A.

Oval duct adapter in STL 3D file format. The internal cross-section on side A is 220x100 mm, while on side B it is 185x55 mm. A uniform useful length of 5 mm is available on both sleeves. The transition links the two ends over 20 mm, with a total overall length of 30 mm. With 1 mm of thickness, the wall remains flexible and material-efficient. The external edges at the ends are chamfered, which simplifies inserting the adapter into the duct. Side B is offset by 9 mm along the Y axis and 9 mm along the Z axis relative to side A.

STL 3D file for an oval duct adapter. On side A, the internal cross-section is 110.1x110 mm (nearly circular), whereas on side B it is 180x40 mm (oval). A uniform useful length of 40 mm is available on both sleeves. The transition portion extends over 20 mm and the overall length, sleeves included, is 100 mm. External chamfers at the ends help with engagement and assembly within the duct system.

Oval pipe adapter provided as a STL 3D file. Side A offers an internal cross-section of 200x75 mm (oval) and side B 111x110 mm (nearly circular). The sleeves on sides A and B have the same useful length of 50 mm. The transition portion extends over 60 mm and the overall length, sleeves included, is 160 mm. Internal chamfers at the ends improve assembly and make insertion smoother. Side B is offset by 30 mm along the Z axis relative to side A.

Oval connector available as a STL 3D file. On side A, the internal cross-section is 200x75 mm (oval), whereas on side B it is 111x110 mm (nearly circular). A uniform useful length of 50 mm is available on both sleeves. Between the two sleeves, the transition runs over 60 mm, resulting in an overall length of 160 mm. A thickness of 1 mm provides a very light, thin shell. The internal edges at the ends are chamfered to help guide the duct during insertion. An offset of 30 mm along the Z axis is applied to side B relative to side A.

Oval hose fitting in STL 3D file format. The internal cross-section on side A is 150x10 mm, while on side B it is 60x20 mm. The useful sleeve length on side A is 15 mm, while on side B it reaches 100 mm. The central transition occupies 140 mm, bringing the overall length to 255 mm. Both the inner and outer edges at the ends remain unchamfered. Side B is offset by 40 mm along the Y axis and 70 mm along the Z axis relative to side A.

Oval coupling available as a STL 3D file. On side A, the internal cross-section is 160x50 mm (oval), whereas on side B it is 45.1x45 mm (nearly circular). Both sleeves share an identical useful length of 20 mm. The transition section between the two ends is 20 mm long, for an overall length of 60 mm (sleeve A, transition and sleeve B). Both the inner and outer edges at the ends remain unchamfered. Side B is offset by 10 mm along the Y axis relative to side A.

STL 3D file for an oval hose fitting. On both sides A and B, the internal cross-section is the same: 224x90 mm. The useful length is consistent on both ends: 30 mm. The transition links the two ends over 140 mm, with a total overall length of 200 mm. The internal edges at the ends are chamfered to help guide the duct during insertion. An offset of 42 mm along the Z axis is applied to side B relative to side A.

STL 3D file for an oval duct adapter. The internal cross-section on side A is 160x37 mm (oval), while on side B it is 45.1x45 mm (nearly circular). The useful length is consistent on both ends: 20 mm. The transition links the two ends over 20 mm, with a total overall length of 60 mm. External chamfers at the ends help with engagement and assembly within the duct system. Side B is offset by 10 mm along the Y axis relative to side A.

STL 3D file for an oval adapter. The internal cross-section on side A is 130x90 mm, while on side B it is 100x40 mm. The useful sleeve length on side A is 50 mm, while on side B it reaches 20 mm. The transition section between the two ends is 100 mm long, for an overall length of 170 mm (sleeve A, transition and sleeve B). No chamfer is applied at the ends, so both the inner and outer edges remain sharp.

STL 3D file for an oval adapter. Side A offers an internal cross-section of 90.1x90 mm (nearly circular) and side B 100x40 mm (oval). The useful sleeve length on side A is 50 mm, while on side B it reaches 20 mm. The transition section is 100 mm long, for a final overall length of 170 mm. The external chamfers improve fit when inserting the adapter into ducts or hoses.

Oval adapter available as a STL 3D file. The internal cross-section on side A is 80x30 mm, while on side B it is 50x15 mm. The useful lengths are 20 mm (A) and 100 mm (B), respectively. The transition section between the two ends is 40 mm long, for an overall length of 160 mm (sleeve A, transition and sleeve B). A thickness of 4 mm provides good stiffness. Both the inner and outer edges at the ends remain unchamfered. Compared to side A, side B is shifted by 20 mm along the Y axis.

STL 3D file for an oval hose fitting. The internal cross-section on side A is 140x80 mm, while on side B it is 130x35 mm. You get a sleeve of 8 mm on side A and 6 mm on side B. The transition links the two ends over 40 mm, with a total overall length of 54 mm. Internal chamfers at the ends improve assembly and make insertion smoother.

Oval hose adapter provided as a STL 3D file. On side A, the internal cross-section is 105x35 mm, whereas on side B it is 105x34 mm. The useful sleeve length is the same on both sides, 40 mm. The transition links the two ends over 20 mm, with a total overall length of 100 mm. Internal chamfers are added at the ends to make assembly and duct insertion easier.

Oval connector provided as a STL 3D file. On side A, the internal cross-section is 196x195.9 mm (nearly circular), whereas on side B it is 196x56 mm (oval). The useful lengths are 20 mm (A) and 40 mm (B), respectively. Between the two sleeves, the transition runs over 60 mm, resulting in an overall length of 120 mm. The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval connector available as a STL 3D file. On side A, the internal cross-section is 140x50 mm, whereas on side B it is 130x35 mm. You get a sleeve of 8 mm on side A and 6 mm on side B. The central transition occupies 40 mm, bringing the overall length to 54 mm. The internal chamfers help start the duct insertion more easily.

Oval connector available as a STL 3D file. On side A, the internal cross-section is 140x40 mm, whereas on side B it is 130x35 mm. The useful sleeve length on side A is 8 mm, while on side B it reaches 6 mm. The transition section between the two ends is 40 mm long, for an overall length of 54 mm (sleeve A, transition and sleeve B). The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval duct transition adapter in STL 3D file format. Side A offers an internal cross-section of 150x40 mm and side B 130x35 mm. The sleeve on side A provides a useful length of 8 mm, and on side B 6 mm. Between the two sleeves, the transition runs over 40 mm, resulting in an overall length of 54 mm. Internal chamfers at the ends improve assembly and make insertion smoother.

Oval duct fitting in STL 3D file format. Side A offers an internal cross-section of 120x80 mm and side B 90x70 mm. The useful sleeve length is the same on both sides, 20 mm. The transition portion extends over 30 mm and the overall length, sleeves included, is 70 mm. The ends are left without chamfers, with raw inner and outer edges.

Oval pipe adapter in STL 3D file format. Side A offers an internal cross-section of 106x52 mm (oval) and side B 72x71 mm (nearly circular). The sleeve on side A provides a useful length of 35 mm, and on side B 25 mm. The central transition occupies 32 mm, bringing the overall length to 92 mm. Both the inner and outer edges at the ends remain unchamfered.