Custom Hose-shaped reducer STL 3D file 220x100 mm to 185x55 mm – transition: 20 mm 📦#4326

STL 3D file for an oval duct coupling. On side A, the internal cross-section is 220x100 mm, whereas on side B it is 185x55 mm. The sleeve on side A provides a useful length of 5 mm, and on side B 6 mm. The transition links the two ends over 24 mm, with a total overall length of 35 mm. A thickness of 1 mm provides a very light, thin shell. The external chamfers improve fit when inserting the adapter into ducts or hoses. Compared to side A, side B is shifted by 11 mm along the Y axis and 11 mm along the Z axis.

STL 3D file for an oval hose fitting. The internal cross-section on side A is 140x80 mm, while on side B it is 130x35 mm. You get a sleeve of 8 mm on side A and 6 mm on side B. The transition links the two ends over 40 mm, with a total overall length of 54 mm. Internal chamfers at the ends improve assembly and make insertion smoother.

Oval connector available as a STL 3D file. On side A, the internal cross-section is 140x50 mm, whereas on side B it is 130x35 mm. You get a sleeve of 8 mm on side A and 6 mm on side B. The central transition occupies 40 mm, bringing the overall length to 54 mm. The internal chamfers help start the duct insertion more easily.

Oval duct transition adapter in STL 3D file format. Side A offers an internal cross-section of 150x40 mm and side B 130x35 mm. The sleeve on side A provides a useful length of 8 mm, and on side B 6 mm. Between the two sleeves, the transition runs over 40 mm, resulting in an overall length of 54 mm. Internal chamfers at the ends improve assembly and make insertion smoother.

Oval hose fitting available as a STL 3D file. On side A, the internal cross-section is 140x40 mm, whereas on side B it is 130x35 mm. On side A, the sleeve is 8 mm long, and on side B 6 mm. The transition portion extends over 20 mm and the overall length, sleeves included, is 34 mm. Internal chamfers at the ends improve assembly and make insertion smoother.

Oval connector available as a STL 3D file. On side A, the internal cross-section is 140x40 mm, whereas on side B it is 130x35 mm. The useful sleeve length on side A is 8 mm, while on side B it reaches 6 mm. The transition section between the two ends is 40 mm long, for an overall length of 54 mm (sleeve A, transition and sleeve B). The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval duct coupling provided as a STL 3D file. On side A, the internal cross-section is 183x71 mm (oval), whereas on side B it is 98.1x98 mm (nearly circular). The useful sleeve length on side A is 10 mm, while on side B it reaches 50 mm. The transition links the two ends over 30 mm, with a total overall length of 90 mm. The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval connector provided as a STL 3D file. On side A, the internal cross-section is 196x195.9 mm (nearly circular), whereas on side B it is 196x56 mm (oval). The useful lengths are 20 mm (A) and 40 mm (B), respectively. Between the two sleeves, the transition runs over 60 mm, resulting in an overall length of 120 mm. The internal edges at the ends are chamfered to help guide the duct during insertion.

STL 3D file for an oval duct adapter. The internal cross-section on side A is 160x37 mm (oval), while on side B it is 45.1x45 mm (nearly circular). The useful length is consistent on both ends: 20 mm. The transition links the two ends over 20 mm, with a total overall length of 60 mm. External chamfers at the ends help with engagement and assembly within the duct system. Side B is offset by 10 mm along the Y axis relative to side A.

Oval coupling in STL 3D file format. On side A, the internal cross-section is 121x120.5 mm (nearly circular), whereas on side B it is 90x53 mm (oval). The sleeve on side A provides a useful length of 25 mm, and on side B 30 mm. The transition section is 63 mm long, for a final overall length of 118 mm. Internal chamfers at the ends improve assembly and make insertion smoother. An offset of 31.5 mm along the Z axis is applied to side B relative to side A.

STL 3D file for an oval duct fitting. The internal cross-section on side A is 120.1x120 mm (nearly circular), while on side B it is 80x40 mm (oval). On side A, the sleeve is 5 mm long, and on side B 10 mm. The central transition occupies 20 mm, bringing the overall length to 35 mm. A thickness of 4 mm provides good stiffness. The external chamfers improve fit when inserting the adapter into ducts or hoses.

Oval hose adapter in STL 3D file format. The internal cross-section on side A is 158x40 mm (oval), while on side B it is 113x112 mm (nearly circular). Each sleeve provides a useful length of 30 mm. The central transition occupies 20 mm, bringing the overall length to 80 mm. External chamfers are added at the ends to make it easier to insert the adapter into ducts or hoses.

STL 3D file for an oval duct adapter. On side A, the internal cross-section is 100.1x100 mm (nearly circular), whereas on side B it is 80x40 mm (oval). You get a sleeve of 5 mm on side A and 10 mm on side B. The transition section is 20 mm long, for a final overall length of 35 mm. Wall thickness is generous (4 mm). External chamfers are added at the ends to make it easier to insert the adapter into ducts or hoses.

Oval pipe adapter provided as a STL 3D file. On side A, the internal cross-section is 100x80 mm, whereas on side B it is 80x40 mm. The sleeves also differ in useful length: 5 mm on side A and 10 mm on side B. Between the two sleeves, the transition runs over 20 mm, resulting in an overall length of 35 mm. With 4 mm of wall thickness, the adapter gains extra strength. External chamfers are added at the ends to make it easier to insert the adapter into ducts or hoses.

STL 3D file for an oval duct coupling. On side A, the internal cross-section is 176x77 mm (oval), whereas on side B it is 77x76 mm (nearly circular). The useful sleeve length is the same on both sides, 20 mm. The transition section between the two ends is 36 mm long, for an overall length of 76 mm (sleeve A, transition and sleeve B). Both the inner and outer edges at the ends remain unchamfered.

Oval pipe adapter provided as a STL 3D file. The internal cross-section on side A is 100x70 mm, while on side B it is 80x40 mm. You get a sleeve of 5 mm on side A and 10 mm on side B. The transition section is 20 mm long, for a final overall length of 35 mm. The shell is relatively thick, with a wall thickness of 4 mm. External chamfers are added at the ends to make it easier to insert the adapter into ducts or hoses.

STL 3D file for an oval connector. On side A, the internal cross-section is 88.9x34.9 mm (oval), whereas on side B it is 46x45 mm (nearly circular). The useful length is consistent on both ends: 10 mm. The transition links the two ends over 20 mm, with a total overall length of 40 mm. The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval connector available as a STL 3D file. The internal cross-section on side A is 91x80 mm, while on side B it is 80x40 mm. The useful sleeve length on side A is 5 mm, while on side B it reaches 10 mm. The transition section between the two ends is 20 mm long, for an overall length of 35 mm (sleeve A, transition and sleeve B). The shell is relatively thick, with a wall thickness of 4 mm. External chamfers are added at the ends to make it easier to insert the adapter into ducts or hoses.

STL 3D file for an oval hose fitting. On side A, the internal cross-section is 80.1x80 mm (nearly circular), whereas on side B it is 80x40 mm (oval). The sleeve on side A provides a useful length of 5 mm, and on side B 10 mm. The transition section is 20 mm long, for a final overall length of 35 mm. The wall is on the thicker side at 4 mm. External chamfers at the ends help with engagement and assembly within the duct system.

Oval pipe adapter available as a STL 3D file. On side A, the internal cross-section is 100x15 mm, whereas on side B it is 50x28 mm. The useful sleeve length is the same on both sides, 10 mm. The transition portion extends over 40 mm and the overall length, sleeves included, is 60 mm. The internal chamfers help start the duct insertion more easily.

STL 3D file for an oval adapter. The internal cross-section on side A is 120x80 mm, while on side B it is 90x70 mm. The sleeves on sides A and B have the same useful length of 5 mm. The transition section is 30 mm long, for a final overall length of 40 mm. No chamfer is applied at the ends, so both the inner and outer edges remain sharp.

STL 3D file for an oval coupling. Side A offers an internal cross-section of 102x74 mm (oval) and side B 83.5x83 mm (nearly circular). The useful sleeve length on side A is 15 mm, while on side B it reaches 18 mm. The central transition occupies 22 mm, bringing the overall length to 55 mm. No chamfer is applied at the ends, so both the inner and outer edges remain sharp.

Oval duct coupling in STL 3D file format. Side A offers an internal cross-section of 102x74 mm (oval) and side B 83.5x83 mm (nearly circular). You get a sleeve of 15 mm on side A and 20 mm on side B. The transition section is 25 mm long, for a final overall length of 60 mm. Both the inner and outer edges at the ends remain unchamfered.

Oval duct fitting in STL 3D file format. Side A offers an internal cross-section of 120x80 mm and side B 90x70 mm. The useful sleeve length is the same on both sides, 20 mm. The transition portion extends over 30 mm and the overall length, sleeves included, is 70 mm. The ends are left without chamfers, with raw inner and outer edges.

STL 3D file for an oval connector. Side A offers an internal cross-section of 102x74 mm (oval) and side B 79x78 mm (nearly circular). You get a sleeve of 20 mm on side A and 25 mm on side B. The central transition occupies 32 mm, bringing the overall length to 77 mm. The ends are straight, with no chamfer at all.

Oval duct coupling in STL 3D file format. Side A offers an internal cross-section of 102x74 mm (oval) and side B 84x83 mm (nearly circular). The sleeve on side A provides a useful length of 20 mm, and on side B 25 mm. The transition portion extends over 32 mm and the overall length, sleeves included, is 77 mm. The ends are straight, with no chamfer at all.

Oval duct transition adapter available as a STL 3D file. On side A, the internal cross-section is 102x74 mm (oval), whereas on side B it is 83.5x83 mm (nearly circular). The useful lengths are 20 mm (A) and 25 mm (B), respectively. The central transition occupies 32 mm, bringing the overall length to 77 mm. Both the inner and outer edges at the ends remain unchamfered.

Oval hose adapter provided as a STL 3D file. On side A, the internal cross-section is 105x35 mm, whereas on side B it is 105x34 mm. The useful sleeve length is the same on both sides, 40 mm. The transition links the two ends over 20 mm, with a total overall length of 100 mm. Internal chamfers are added at the ends to make assembly and duct insertion easier.

Oval coupling available as a STL 3D file. On side A, the internal cross-section is 160x50 mm (oval), whereas on side B it is 45.1x45 mm (nearly circular). Both sleeves share an identical useful length of 20 mm. The transition section between the two ends is 20 mm long, for an overall length of 60 mm (sleeve A, transition and sleeve B). Both the inner and outer edges at the ends remain unchamfered. Side B is offset by 10 mm along the Y axis relative to side A.