Custom Oval hose adapter STL 3D file 150x40 mm to 130x35 mm – transition: 40 mm 📦#4453

Oval connector available as a STL 3D file. On side A, the internal cross-section is 140x40 mm, whereas on side B it is 130x35 mm. The useful sleeve length on side A is 8 mm, while on side B it reaches 6 mm. The transition section between the two ends is 40 mm long, for an overall length of 54 mm (sleeve A, transition and sleeve B). The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval connector available as a STL 3D file. On side A, the internal cross-section is 140x50 mm, whereas on side B it is 130x35 mm. You get a sleeve of 8 mm on side A and 6 mm on side B. The central transition occupies 40 mm, bringing the overall length to 54 mm. The internal chamfers help start the duct insertion more easily.

Oval hose fitting available as a STL 3D file. On side A, the internal cross-section is 140x40 mm, whereas on side B it is 130x35 mm. On side A, the sleeve is 8 mm long, and on side B 6 mm. The transition portion extends over 20 mm and the overall length, sleeves included, is 34 mm. Internal chamfers at the ends improve assembly and make insertion smoother.

STL 3D file for an oval hose fitting. The internal cross-section on side A is 140x80 mm, while on side B it is 130x35 mm. You get a sleeve of 8 mm on side A and 6 mm on side B. The transition links the two ends over 40 mm, with a total overall length of 54 mm. Internal chamfers at the ends improve assembly and make insertion smoother.

Oval pipe adapter available as a STL 3D file. On side A, the internal cross-section is 100x15 mm, whereas on side B it is 50x28 mm. The useful sleeve length is the same on both sides, 10 mm. The transition portion extends over 40 mm and the overall length, sleeves included, is 60 mm. The internal chamfers help start the duct insertion more easily.

STL 3D file for an oval connector. On side A, the internal cross-section is 88.9x34.9 mm (oval), whereas on side B it is 46x45 mm (nearly circular). The useful length is consistent on both ends: 10 mm. The transition links the two ends over 20 mm, with a total overall length of 40 mm. The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval duct coupling provided as a STL 3D file. The internal cross-section on side A is 79x33 mm (oval), while on side B it is 46x45 mm (nearly circular). The useful sleeve length is the same on both sides, 10 mm. Between the two sleeves, the transition runs over 20 mm, resulting in an overall length of 40 mm. Both the inner and outer edges at the ends remain unchamfered.

Oval connector available as a STL 3D file. The internal cross-section on side A is 53x52 mm (nearly circular), while on side B it is 50x28 mm (oval). On side A, the sleeve is 20 mm long, and on side B 30 mm. The transition section is 20 mm long, for a final overall length of 70 mm. The internal edges at the ends are chamfered to help guide the duct during insertion.

STL 3D file for an oval adapter. The internal cross-section on side A is 120x80 mm, while on side B it is 90x70 mm. The sleeves on sides A and B have the same useful length of 5 mm. The transition section is 30 mm long, for a final overall length of 40 mm. No chamfer is applied at the ends, so both the inner and outer edges remain sharp.

Oval hose adapter provided as a STL 3D file. On side A, the internal cross-section is 105x35 mm, whereas on side B it is 105x34 mm. The useful sleeve length is the same on both sides, 40 mm. The transition links the two ends over 20 mm, with a total overall length of 100 mm. Internal chamfers are added at the ends to make assembly and duct insertion easier.

STL 3D file for an oval duct coupling. On side A, the internal cross-section is 176x77 mm (oval), whereas on side B it is 77x76 mm (nearly circular). The useful sleeve length is the same on both sides, 20 mm. The transition section between the two ends is 36 mm long, for an overall length of 76 mm (sleeve A, transition and sleeve B). Both the inner and outer edges at the ends remain unchamfered.

Oval duct fitting in STL 3D file format. Side A offers an internal cross-section of 120x80 mm and side B 90x70 mm. The useful sleeve length is the same on both sides, 20 mm. The transition portion extends over 30 mm and the overall length, sleeves included, is 70 mm. The ends are left without chamfers, with raw inner and outer edges.

STL 3D file for an oval connector. Side A offers an internal cross-section of 102x74 mm (oval) and side B 79x78 mm (nearly circular). You get a sleeve of 20 mm on side A and 25 mm on side B. The central transition occupies 32 mm, bringing the overall length to 77 mm. The ends are straight, with no chamfer at all.

Oval duct coupling in STL 3D file format. Side A offers an internal cross-section of 102x74 mm (oval) and side B 83.5x83 mm (nearly circular). You get a sleeve of 15 mm on side A and 20 mm on side B. The transition section is 25 mm long, for a final overall length of 60 mm. Both the inner and outer edges at the ends remain unchamfered.

STL 3D file for an oval coupling. Side A offers an internal cross-section of 102x74 mm (oval) and side B 83.5x83 mm (nearly circular). The useful sleeve length on side A is 15 mm, while on side B it reaches 18 mm. The central transition occupies 22 mm, bringing the overall length to 55 mm. No chamfer is applied at the ends, so both the inner and outer edges remain sharp.

Oval pipe adapter provided as a STL 3D file. The internal cross-section on side A is 100x70 mm, while on side B it is 80x40 mm. You get a sleeve of 5 mm on side A and 10 mm on side B. The transition section is 20 mm long, for a final overall length of 35 mm. The shell is relatively thick, with a wall thickness of 4 mm. External chamfers are added at the ends to make it easier to insert the adapter into ducts or hoses.

STL 3D file for an oval duct adapter. The internal cross-section on side A is 160x37 mm (oval), while on side B it is 45.1x45 mm (nearly circular). The useful length is consistent on both ends: 20 mm. The transition links the two ends over 20 mm, with a total overall length of 60 mm. External chamfers at the ends help with engagement and assembly within the duct system. Side B is offset by 10 mm along the Y axis relative to side A.

Oval coupling available as a STL 3D file. On side A, the internal cross-section is 160x50 mm (oval), whereas on side B it is 45.1x45 mm (nearly circular). Both sleeves share an identical useful length of 20 mm. The transition section between the two ends is 20 mm long, for an overall length of 60 mm (sleeve A, transition and sleeve B). Both the inner and outer edges at the ends remain unchamfered. Side B is offset by 10 mm along the Y axis relative to side A.

Oval duct coupling in STL 3D file format. Side A offers an internal cross-section of 102x74 mm (oval) and side B 84x83 mm (nearly circular). The sleeve on side A provides a useful length of 20 mm, and on side B 25 mm. The transition portion extends over 32 mm and the overall length, sleeves included, is 77 mm. The ends are straight, with no chamfer at all.

Oval duct transition adapter available as a STL 3D file. On side A, the internal cross-section is 102x74 mm (oval), whereas on side B it is 83.5x83 mm (nearly circular). The useful lengths are 20 mm (A) and 25 mm (B), respectively. The central transition occupies 32 mm, bringing the overall length to 77 mm. Both the inner and outer edges at the ends remain unchamfered.

Oval pipe adapter provided as a STL 3D file. On side A, the internal cross-section is 100x80 mm, whereas on side B it is 80x40 mm. The sleeves also differ in useful length: 5 mm on side A and 10 mm on side B. Between the two sleeves, the transition runs over 20 mm, resulting in an overall length of 35 mm. With 4 mm of wall thickness, the adapter gains extra strength. External chamfers are added at the ends to make it easier to insert the adapter into ducts or hoses.

Oval pipe adapter in STL 3D file format. The internal cross-section on side A is 52x39 mm (oval), while on side B it is 47x46 mm (nearly circular). The useful sleeve length is the same on both sides, 30 mm. The transition section is 20 mm long, for a final overall length of 80 mm. The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval pipe adapter in STL 3D file format. Side A offers an internal cross-section of 106x52 mm (oval) and side B 72x71 mm (nearly circular). The sleeve on side A provides a useful length of 35 mm, and on side B 25 mm. The central transition occupies 32 mm, bringing the overall length to 92 mm. Both the inner and outer edges at the ends remain unchamfered.

Oval hose adapter in STL 3D file format. On side A, the internal cross-section is 52x40 mm (oval), whereas on side B it is 44x43 mm (nearly circular). Each sleeve provides a useful length of 30 mm. Between the two sleeves, the transition runs over 20 mm, resulting in an overall length of 80 mm. Internal chamfers are added at the ends to make assembly and duct insertion easier.

Oval connector available as a STL 3D file. The internal cross-section on side A is 91x80 mm, while on side B it is 80x40 mm. The useful sleeve length on side A is 5 mm, while on side B it reaches 10 mm. The transition section between the two ends is 20 mm long, for an overall length of 35 mm (sleeve A, transition and sleeve B). The shell is relatively thick, with a wall thickness of 4 mm. External chamfers are added at the ends to make it easier to insert the adapter into ducts or hoses.

Oval duct coupling provided as a STL 3D file. Side A offers an internal cross-section of 106x78 mm (oval) and side B 82x81 mm (nearly circular). The sleeve on side A provides a useful length of 20 mm, and on side B 25 mm. The central transition occupies 32 mm, bringing the overall length to 77 mm. The ends are left without chamfers, with raw inner and outer edges.

STL 3D file for an oval hose fitting. On side A, the internal cross-section is 80.1x80 mm (nearly circular), whereas on side B it is 80x40 mm (oval). The sleeve on side A provides a useful length of 5 mm, and on side B 10 mm. The transition section is 20 mm long, for a final overall length of 35 mm. The wall is on the thicker side at 4 mm. External chamfers at the ends help with engagement and assembly within the duct system.

Oval duct coupling provided as a STL 3D file. On side A, the internal cross-section is 183x71 mm (oval), whereas on side B it is 98.1x98 mm (nearly circular). The useful sleeve length on side A is 10 mm, while on side B it reaches 50 mm. The transition links the two ends over 30 mm, with a total overall length of 90 mm. The internal edges at the ends are chamfered to help guide the duct during insertion.