Custom Oval hose adapter STL file 26.1x26 mm to 70x35 mm – transition: 100 mm 📦#12519

Oval pipe adapter provided as a STL 3D file. Side A offers an internal cross-section of 38.7x38.6 mm (nearly circular) and side B 50x14 mm (oval). On side A, the sleeve is 50 mm long, and on side B 20 mm. The transition section between the two ends is 120 mm long, for an overall length of 190 mm (sleeve A, transition and sleeve B). The ends are left without chamfers, with raw inner and outer edges. Compared to side A, side B is shifted by 30 mm along the Y axis and 30 mm along the Z axis.

STL 3D file for an oval coupling. The internal cross-section on side A is 90.1x90 mm (nearly circular), while on side B it is 100x40 mm (oval). On side A, the sleeve is 50 mm long, and on side B 20 mm. The transition section is 100 mm long, for a final overall length of 170 mm. The ends are straight, with no chamfer at all. Side B is offset by 30 mm along the Y axis and 30 mm along the Z axis relative to side A.

Oval duct coupling provided as a STL 3D file. Side A offers an internal cross-section of 26.1x26 mm (nearly circular) and side B 75x28 mm (oval). The useful lengths are 40 mm (A) and 30 mm (B), respectively. The transition links the two ends over 55 mm, with a total overall length of 125 mm. The ends are straight, with no chamfer at all. Compared to side A, side B is shifted by 22 mm along the Y axis.

STL 3D file for an oval duct transition adapter. The internal cross-sections on sides A and B are identical, 60x20 mm. The useful length is consistent on both ends: 15 mm. Between the two sleeves, the transition runs over 140 mm, resulting in an overall length of 170 mm. Both the inner and outer edges at the ends remain unchamfered. An offset of 40 mm along the Y axis and 70 mm along the Z axis is applied to side B relative to side A.

STL 3D file for an oval adapter. Side A offers an internal cross-section of 110.1x110 mm (nearly circular) and side B 180x40 mm (oval). Both sleeves share an identical useful length of 40 mm. The transition links the two ends over 70 mm, with a total overall length of 150 mm. Internal chamfers are added at the ends to make assembly and duct insertion easier. An offset of 35 mm along the Y axis and 35 mm along the Z axis is applied to side B relative to side A.

Oval duct coupling provided as a STL 3D file. The internal cross-sections on sides A and B are identical, 60x20 mm. The useful length is consistent on both ends: 15 mm. The central transition occupies 140 mm, bringing the overall length to 170 mm. The ends are left without chamfers, with raw inner and outer edges. Side B is offset by 40 mm along the Y axis and 70 mm along the Z axis relative to side A.

Oval hose adapter in STL 3D file format. On side A, the internal cross-section is 55x25 mm (oval), whereas on side B it is 43x42 mm (nearly circular). The sleeve on side A provides a useful length of 50 mm, and on side B 30 mm. The central transition occupies 20 mm, bringing the overall length to 100 mm. The ends are left without chamfers, with raw inner and outer edges.

Oval coupling provided as a STL 3D file. The internal cross-section on side A is 54x38 mm (oval), while on side B it is 43x42 mm (nearly circular). Both sleeves share an identical useful length of 30 mm. The transition section between the two ends is 20 mm long, for an overall length of 80 mm (sleeve A, transition and sleeve B). The ends are straight, with no chamfer at all.

STL 3D file for an oval adapter. The internal cross-section on side A is 130x90 mm, while on side B it is 100x40 mm. The useful sleeve length on side A is 50 mm, while on side B it reaches 20 mm. The transition section between the two ends is 100 mm long, for an overall length of 170 mm (sleeve A, transition and sleeve B). No chamfer is applied at the ends, so both the inner and outer edges remain sharp.

Oval coupling in STL 3D file format. The internal cross-section on side A is 30.7x30.6 mm (nearly circular), while on side B it is 30.7x12 mm (oval). The useful length is consistent on both ends: 20 mm. The central transition occupies 20 mm, bringing the overall length to 60 mm. The ends are straight, with no chamfer at all. Compared to side A, side B is shifted by 10 mm along the Z axis.

Oval coupling available as a STL 3D file. On side A, the internal cross-section is 160x50 mm (oval), whereas on side B it is 45.1x45 mm (nearly circular). Both sleeves share an identical useful length of 20 mm. The transition section between the two ends is 20 mm long, for an overall length of 60 mm (sleeve A, transition and sleeve B). Both the inner and outer edges at the ends remain unchamfered. Side B is offset by 10 mm along the Y axis relative to side A.

Oval adapter in STL 3D file format. Side A offers an internal cross-section of 20x19.9 mm and side B 12x11.9 mm, both close to circular. On side A, the sleeve is 35 mm long, and on side B 14 mm. The transition section between the two ends is 30 mm long, for an overall length of 79 mm (sleeve A, transition and sleeve B). The ends are left without chamfers, with raw inner and outer edges.

Oval duct transition adapter provided as a STL 3D file. Side A offers an internal cross-section of 53x38 mm (oval) and side B 51x50 mm (nearly circular). Both sleeves share an identical useful length of 25 mm. The transition section is 20 mm long, for a final overall length of 70 mm. No chamfer is applied at the ends, so both the inner and outer edges remain sharp.

Oval hose adapter provided as a STL 3D file. The internal cross-sections on sides A and B are identical, 26x17 mm. The useful sleeve length is the same on both sides, 20 mm. The transition section is 20 mm long, for a final overall length of 60 mm. The internal edges at the ends are chamfered to help guide the duct during insertion. Compared to side A, side B is shifted by 1.3 mm along the Y axis and 8.5 mm along the Z axis.

STL 3D file for an oval hose fitting. On side A, the internal cross-section is 170x75 mm (oval), whereas on side B it is 96.1x96 mm (nearly circular). The sleeves also differ in useful length: 100 mm on side A and 20 mm on side B. The transition portion extends over 60 mm and the overall length, sleeves included, is 180 mm. Internal chamfers are added at the ends to make assembly and duct insertion easier. An offset of 30 mm along the Y axis and 30 mm along the Z axis is applied to side B relative to side A.

STL 3D file for an oval pipe adapter. Side A offers an internal cross-section of 67x47 mm and side B 55x35 mm. A uniform useful length of 10 mm is available on both sleeves. The central transition occupies 90 mm, bringing the overall length to 110 mm. The ends are left without chamfers, with raw inner and outer edges.

STL 3D file for an oval adapter. Side A offers an internal cross-section of 90x10 mm (oval) and side B 37.5x37.4 mm (nearly circular). Each sleeve provides a useful length of 40 mm. The transition section is 50 mm long, for a final overall length of 130 mm. The internal chamfers help start the duct insertion more easily.

Oval hose adapter available as a STL 3D file. The internal cross-section on side A is 36.1x32.9 mm (oval), while on side B it is 31.6x31.5 mm (nearly circular). Both sleeves share an identical useful length of 42 mm. The transition section is 20 mm long, for a final overall length of 104 mm. The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval adapter available as a STL 3D file. The internal cross-section on side A is 80x30 mm, while on side B it is 50x15 mm. The useful lengths are 20 mm (A) and 100 mm (B), respectively. The transition section between the two ends is 40 mm long, for an overall length of 160 mm (sleeve A, transition and sleeve B). A thickness of 4 mm provides good stiffness. Both the inner and outer edges at the ends remain unchamfered. Compared to side A, side B is shifted by 20 mm along the Y axis.

Oval duct fitting in STL 3D file format. The internal cross-section on side A is 69x39 mm (oval), while on side B it is 70x69 mm (nearly circular). The useful sleeve length on side A is 20 mm, while on side B it reaches 10 mm. The transition section is 30 mm long, for a final overall length of 60 mm. The ends are straight, with no chamfer at all.

Oval hose adapter in STL 3D file format. On side A, the internal cross-section is 52x40 mm (oval), whereas on side B it is 44x43 mm (nearly circular). Each sleeve provides a useful length of 30 mm. Between the two sleeves, the transition runs over 20 mm, resulting in an overall length of 80 mm. Internal chamfers are added at the ends to make assembly and duct insertion easier.

Oval pipe adapter in STL 3D file format. The internal cross-section on side A is 52x39 mm (oval), while on side B it is 47x46 mm (nearly circular). The useful sleeve length is the same on both sides, 30 mm. The transition section is 20 mm long, for a final overall length of 80 mm. The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval pipe adapter in STL 3D file format. Side A offers an internal cross-section of 106x52 mm (oval) and side B 72x71 mm (nearly circular). The sleeve on side A provides a useful length of 35 mm, and on side B 25 mm. The central transition occupies 32 mm, bringing the overall length to 92 mm. Both the inner and outer edges at the ends remain unchamfered.

Oval hose adapter provided as a STL 3D file. On side A, the internal cross-section is 105x35 mm, whereas on side B it is 105x34 mm. The useful sleeve length is the same on both sides, 40 mm. The transition links the two ends over 20 mm, with a total overall length of 100 mm. Internal chamfers are added at the ends to make assembly and duct insertion easier.

Oval duct coupling available as a STL 3D file. On side A, the internal cross-section is 20.1x20 mm (nearly circular), whereas on side B it is 35x15 mm (oval). A uniform useful length of 25 mm is available on both sleeves. The transition section between the two ends is 20 mm long, for an overall length of 70 mm (sleeve A, transition and sleeve B). The internal edges at the ends are chamfered to help guide the duct during insertion.