O-ring 3D Files - Inner diameter (ID) 60 to 100 mm | page 2

Model(s) 31 to 60 of 61

O'ring STL file ID 74 × CS 1 mm (📦 #1519)

1 object(s) - format STL
o'ring STL file ID 74 × CS 1 mm
STL file of O-ring with ID (inner diameter) 74 mm by CS (cross section) 1  mm. External diameter (OD) corresponds to 76 mm.
Parameter Value Unit
inner diameter (ID) 74 mm
cross section (CS) 1 mm

O-ring STL 3D file ID 75 × CS 5.3 mm (📦 #3246)

1 object(s) - format STL
O-ring STL 3D file ID 75 × CS 5.3 mm
STL file of rubber ring with Internal diameter 75 mm × thickness 5.3  mm. Outer diameter (OD) is therefore 85.6 mm.
Parameter Value Unit
inner diameter (ID) 75 mm
cross section (CS) 5.3 mm

O-ring STL 3D file ID 76 × CS 9.5 mm (📦 #1637)

1 object(s) - format STL
O-ring STL 3D file ID 76 × CS 9.5 mm
STL model of circular seal with dimensions Inner diameter 76 mm by CS 9.5  mm. External diameter (OD) resulting corresponds to 95 mm.
Parameter Value Unit
inner diameter (ID) 76 mm
cross section (CS) 9.5 mm

O-ring STL 3D file ID 77 × CS 3 mm (📦 #8504)

1 object(s) - format STL
O-ring STL 3D file ID 77 × CS 3 mm
3D model of sealing ring with ID 77 mm by thickness 3  mm. Outer diameter (OD, for outer diameter) resulting is 83 mm.
Parameter Value Unit
inner diameter (ID) 77 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 78 × CS 6 mm (📦 #1821)

1 object(s) - format STL
O-ring STL 3D file ID 78 × CS 6 mm
3D model in STL format of sealing ring with dimensions Internal diameter 78 mm by section thickness 6  mm. External diameter (OD) resulting corresponds to 90 mm.
Parameter Value Unit
inner diameter (ID) 78 mm
cross section (CS) 6 mm

O-ring STL file ID 78.5 × CS 5.8 mm (📦 #3251)

1 object(s) - format STL
O-ring STL file ID 78.5 × CS 5.8 mm
STL file of rubber ring with dimensions Internal diameter (ID) 78.5 mm by CS (cross section) 5.8  mm. Outer diameter (OD) resulting corresponds to 90.1 mm.
Parameter Value Unit
inner diameter (ID) 78.5 mm
cross section (CS) 5.8 mm

O'ring STL file ID 80 × CS 2.5 mm (📦 #1348)

1 object(s) - format STL
o'ring STL file ID 80 × CS 2.5 mm
3D model of O-ring (torus-shaped seal) with ID (inner diameter) 80 mm × CS 2.5  mm. Outer diameter (OD) is therefore 85 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 80 × CS 5 mm (📦 #1547)

1 object(s) - format STL
O-ring STL 3D file ID 80 × CS 5 mm
File of rubber ring with Internal diameter (ID) 80 mm by thickness 5  mm. Final diameter resulting is therefore 90 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 5 mm

O'ring STL 3D file ID 80 × CS 1 mm (📦 #2471)

1 object(s) - format STL
o'ring STL 3D file ID 80 × CS 1 mm
STL model of O-ring (torus-shaped seal) with Inner diameter 80 mm / section thickness 1  mm. External diameter (OD) corresponds to 82 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 1 mm

O-ring STL 3D file ID 80 × CS 6 mm (📦 #2636)

1 object(s) - format STL
O-ring STL 3D file ID 80 × CS 6 mm
STL file of rubber ring with dimensions Inner diameter (ID) 80 mm × CS (cross section) 6  mm. External diameter (OD) resulting is 92 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 6 mm

O'ring STL file ID 80 × CS 5.3 mm (📦 #3247)

1 object(s) - format STL
o'ring STL file ID 80 × CS 5.3 mm
Model of O-ring with dimensions Inner diameter (ID) 80 mm × section thickness 5.3  mm. External diameter (OD) is 90.6 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 5.3 mm

O-ring STL 3D file ID 81.6 × CS 3.7 mm (📦 #5967)

1 object(s) - format STL
O-ring STL 3D file ID 81.6 × CS 3.7 mm
STL model of O-ring (torus-shaped seal) with Inner diameter (ID) 81.6 mm × thickness 3.7  mm. External diameter (OD) corresponds to 89 mm.
Parameter Value Unit
inner diameter (ID) 81.6 mm
cross section (CS) 3.7 mm

O-ring STL 3D file ID 84 × CS 3 mm (📦 #1807)

1 object(s) - format STL
O-ring STL 3D file ID 84 × CS 3 mm
File of sealing ring with dimensions Inner diameter 84 mm / CS 3  mm. Final diameter corresponds to 90 mm.
Parameter Value Unit
inner diameter (ID) 84 mm
cross section (CS) 3 mm

O-ring STL file ID 84 × CS 2 mm (📦 #7418)

1 object(s) - format STL
O-ring STL file ID 84 × CS 2 mm
STL file of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 84 mm × thickness 2  mm. Final diameter is 88 mm.
Parameter Value Unit
inner diameter (ID) 84 mm
cross section (CS) 2 mm

O-ring STL file ID 85 × CS 3.5 mm (📦 #8708)

1 object(s) - format STL
O-ring STL file ID 85 × CS 3.5 mm
STL file of circular seal with Internal diameter 85 mm × CS 3.5  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 92 mm.
Parameter Value Unit
inner diameter (ID) 85 mm
cross section (CS) 3.5 mm

O'ring STL 3D file ID 88 × CS 4.5 mm (📦 #7075)

1 object(s) - format STL
o'ring STL 3D file ID 88 × CS 4.5 mm
3D model of sealing ring with dimensions Internal diameter (ID) 88 mm by section thickness 4.5  mm. External diameter (OD) resulting is therefore 97 mm.
Parameter Value Unit
inner diameter (ID) 88 mm
cross section (CS) 4.5 mm

O-ring STL file ID 88 × CS 2.5 mm (📦 #9251)

1 object(s) - format STL
O-ring STL file ID 88 × CS 2.5 mm
Model of sealing ring with Internal diameter 88 mm by thickness 2.5  mm. Outer diameter (OD, for outer diameter) is 93 mm.
Parameter Value Unit
inner diameter (ID) 88 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 88.9 × CS 5 mm (📦 #3281)

1 object(s) - format STL
O-ring STL 3D file ID 88.9 × CS 5 mm
3D file in STL format of circular seal with dimensions ID 88.9 mm by CS 5  mm. External diameter (OD) resulting corresponds to 98.9 mm.
Parameter Value Unit
inner diameter (ID) 88.9 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 89 × CS 4 mm (📦 #9249)

1 object(s) - format STL
O-ring STL 3D file ID 89 × CS 4 mm
File of circular seal with ID (inner diameter) 89 mm by thickness 4  mm. Outer diameter (OD) resulting corresponds to 97 mm.
Parameter Value Unit
inner diameter (ID) 89 mm
cross section (CS) 4 mm

O'ring STL file ID 89 × CS 2.5 mm (📦 #9250)

1 object(s) - format STL
o'ring STL file ID 89 × CS 2.5 mm
3D file in STL format of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 89 mm / CS 2.5  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 94 mm.
Parameter Value Unit
inner diameter (ID) 89 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 90 × CS 3.5 mm (📦 #1328)

1 object(s) - format STL
O-ring STL 3D file ID 90 × CS 3.5 mm
STL model of O-ring (torus-shaped seal) with dimensions ID 90 mm × section thickness 3.5  mm. Outer diameter (OD) resulting corresponds to 97 mm.
Parameter Value Unit
inner diameter (ID) 90 mm
cross section (CS) 3.5 mm

O-ring STL file ID 90 × CS 4 mm (📦 #2183)

1 object(s) - format STL
O-ring STL file ID 90 × CS 4 mm
STL model of O-ring (torus-shaped seal) with Internal diameter 90 mm by CS 4  mm. Outer diameter (OD, for outer diameter) is 98 mm.
Parameter Value Unit
inner diameter (ID) 90 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 90 × CS 5 mm (📦 #2677)

1 object(s) - format STL
O-ring STL 3D file ID 90 × CS 5 mm
3D model of rubber ring with Inner diameter 90 mm by CS (cross section) 5  mm. Outer diameter (OD) resulting corresponds to 100 mm.
Parameter Value Unit
inner diameter (ID) 90 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 90 × CS 2 mm (📦 #9247)

1 object(s) - format STL
O-ring STL 3D file ID 90 × CS 2 mm
File of circular seal with ID (inner diameter) 90 mm by CS 2  mm. Final diameter corresponds to 94 mm.
Parameter Value Unit
inner diameter (ID) 90 mm
cross section (CS) 2 mm

O'ring STL file ID 91 × CS 3 mm (📦 #2986)

1 object(s) - format STL (5.0/5) 1 vote(s)
o'ring STL file ID 91 × CS 3 mm
Model of O-ring (torus-shaped seal) with ID (inner diameter) 91 mm / thickness 3  mm. The outer diameter corresponds to 97 mm.
Parameter Value Unit
inner diameter (ID) 91 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 91 × CS 4 mm (📦 #2989)

1 object(s) - format STL
O-ring STL 3D file ID 91 × CS 4 mm
STL file of sealing ring with Internal diameter (ID) 91 mm by CS (cross section) 4  mm. Outer diameter (OD) resulting is therefore 99 mm.
Parameter Value Unit
inner diameter (ID) 91 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 91 × CS 4.5 mm (📦 #7077)

1 object(s) - format STL
O-ring STL 3D file ID 91 × CS 4.5 mm
Model of O-ring with dimensions Inner diameter 91 mm by CS 4.5  mm. Outer diameter (OD, for outer diameter) corresponds to 100 mm.
Parameter Value Unit
inner diameter (ID) 91 mm
cross section (CS) 4.5 mm

O-ring STL 3D file ID 95.6 × CS 4 mm (📦 #7069)

1 object(s) - format STL
O-ring STL 3D file ID 95.6 × CS 4 mm
STL file of O-ring with dimensions Internal diameter 95.6 mm by thickness 4  mm. The outer diameter resulting corresponds to 103.6 mm.
Parameter Value Unit
inner diameter (ID) 95.6 mm
cross section (CS) 4 mm

O-ring STL file ID 96 × CS 5.3 mm (📦 #3088)

1 object(s) - format STL
O-ring STL file ID 96 × CS 5.3 mm
Model of rubber ring with Internal diameter 96 mm / thickness 5.3  mm. External diameter (OD) is 106.6 mm.
Parameter Value Unit
inner diameter (ID) 96 mm
cross section (CS) 5.3 mm

O-ring STL file ID 96 × CS 7 mm (📦 #5004)

1 object(s) - format STL
O-ring STL file ID 96 × CS 7 mm
3D model in STL format of O-ring (torus-shaped seal) with ID 96 mm / section thickness 7  mm. External diameter (OD) is therefore 110 mm.
Parameter Value Unit
inner diameter (ID) 96 mm
cross section (CS) 7 mm
Can't find the right model? Create it with your specs