Inline tube adapter 3D Files - Side A outer diameter 150 to 200 mm | page 5

Straight tube coupler ⌀160 mm to ⌀80 mm in STL 3D format. Length of this reducer is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Tube reducer ⌀160 mm to ⌀110 mm in STL 3D format. Final length of this reducer is 110 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Straight tubing adapter ⌀160 mm to ⌀120 mm in STL format. Total length of this junction is 110 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Straight tube fitting ⌀161 mm to ⌀96 mm in STL format. Final length of this reducer is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.

Inline tube adapter ⌀161 mm to ⌀122 mm in STL 3D format. Final length of this junction is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 30 mm. The ends are not rounded.

Straight sleeve ⌀161 mm to ⌀160 mm in STL 3D format. Length of this fitting is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.

Straight tube connector ⌀161 mm to ⌀122 mm in STL format. Length of this fitting is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Tube adapter ⌀161 mm to ⌀122 mm in STL format. Total length of this connector is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The axes of the tubes are off-center by 19.4 mm. The ends are not rounded.

Inline tube coupler ⌀162 mm to ⌀155 mm in STL format. Final length of this adapter is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Straight tubing adapter ⌀162 mm to ⌀123 mm in STL format. Total length of this sleeve is 140 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 50 mm. The ends are rounded on the outside to facilitate the connection of the two tubes.

Inline tubing adapter ⌀162 mm to ⌀137 mm in STL 3D format. Total length of this sleeve is 124 mm. The larger-diameter tube has a thickness of 3 mm and a length of 50 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 49 mm. The ends are not rounded.

Inline tube coupler ⌀163 mm to ⌀154 mm in STL 3D format. Length of this sleeve is 100 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 40 mm. The ends are rounded on the outside to ease the connection.

Inline tube reducer ⌀163 mm to ⌀154 mm in STL format. Final length of this connector is 78 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 30 mm. The ends feature an external fillet to make tube connection easier.

Straight tubing adapter ⌀163 mm to ⌀154 mm in STL 3D format. Length of this connector is 150 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 100 mm, the smaller one of 40 mm. The ends feature an external fillet.

Tube fitting ⌀163 mm to ⌀80 mm in STL format. Total length of this sleeve is 110 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 50 mm. The axes of the tubes are off-center by 10 mm. The ends are raw.

Inline sleeve ⌀163 mm to ⌀124 mm in STL 3D format. Length of this sleeve is 100 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 35 mm. The ends have a fillet to ease the connection.

Tube fitting ⌀164 mm to ⌀124 mm in STL 3D format. Total length of this sleeve is 130 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have a fillet on the inside to make tube connection easier.

Tube adapter ⌀164 mm to ⌀154 mm in STL format. Length of this coupler is 34 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 12 mm, the smaller one of 12 mm as well. The ends are raw.

Diameter adapter ⌀165 mm to ⌀154 mm in STL 3D format. Final length of this reducer is 78 mm. The thickness of the tubes is identical: 2.4 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 30 mm. The ends are raw.

Inline tube reducer ⌀165 mm to ⌀156 mm in STL 3D format. Total length of this connector is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are raw.

Inline tubing adapter ⌀167 mm to ⌀155 mm in STL format. Final length of this reducer is 70 mm. The thickness of the tubes is identical: 2.4 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends feature an external fillet.

Inline sleeve ⌀167 mm to ⌀122 mm in STL format. Total length of this fitting is 160 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends feature a fillet to make tube connection easier.

Straight tube adapter ⌀168 mm to ⌀155 mm in STL format. Total length of this connector is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Straight tube coupler ⌀168 mm to ⌀80 mm in STL format. Length of this fitting is 140 mm. The larger-diameter tube has a thickness of 4 mm and a length of 40 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm as well. The ends are raw.

Tube reducer ⌀170 mm to ⌀154 mm in STL format. Length of this connector is 70 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Inline fitting ⌀170 mm to ⌀122 mm in STL format. Length of this junction is 150 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are rounded to facilitate the connection of the two tubes.

Inline tube adapter ⌀171 mm to ⌀170 mm in STL 3D format. Final length of this adapter is 40 mm. The thickness of the tubes is identical: 10 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The ends are not rounded.

Straight tubing adapter ⌀171 mm to ⌀164 mm in STL 3D format. Final length of this connector is 75 mm. The thickness of the tubes is identical: 10 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 10 mm. The ends have no fillet.

Straight tubing adapter ⌀171 mm to ⌀144 mm in STL 3D format. Length of this junction is 75 mm. The thickness of the tubes is identical: 10 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 10 mm. The ends are raw.

Inline fitting ⌀171 mm to ⌀144 mm in STL format. Final length of this adapter is 150 mm. The thickness of the tubes is identical: 10 mm. The larger-diameter tube has a length of 80 mm, the smaller one of 50 mm. The ends are raw.