Inline tube adapter 3D Files - Side A outer diameter 100 to 150 mm | page 7

Tube junction ⌀110 mm to ⌀95 mm in STL format. Total length of this sleeve is 110 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet on the outside.

Inline tube junction ⌀110 mm to ⌀95 mm in STL 3D format. Total length of this adapter is 81 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet on the outside to ease the connection.

Inline tube adapter ⌀110 mm to ⌀108 mm in STL 3D format. Total length of this connector is 80 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are rounded on the outside to ease the connection.

Straight sleeve ⌀110 mm to ⌀88 mm in STL format. Length of this adapter is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends feature an internal fillet to facilitate the connection of the two tubes.

Tube adapter ⌀110 mm to ⌀75 mm in STL format. Total length of this junction is 205 mm. The larger-diameter tube has a thickness of 5 mm and a length of 100 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 100 mm as well. The ends are raw.

Straight tubing adapter ⌀110 mm to ⌀95 mm in STL 3D format. Final length of this adapter is 110 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 35 mm, the smaller one of 35 mm as well. The ends feature an internal fillet to make tube connection easier.

Tube coupler ⌀110 mm to ⌀100 mm in STL format. Length of this sleeve is 120 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are raw.

Straight sleeve ⌀110 mm to ⌀60 mm in STL format. Final length of this reducer is 105 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are rounded to facilitate the connection of the two tubes.

Tube connector ⌀111 mm to ⌀90 mm in STL format. Final length of this adapter is 170 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 70 mm, the smaller one of 80 mm. The ends have a fillet on the outside to ease the connection.

Inline tube reducer ⌀111 mm to ⌀100 mm in STL format. Length of this connector is 180 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 80 mm, the smaller one of 80 mm as well. The ends feature an external fillet to facilitate the connection of the two tubes.

Straight tubing adapter ⌀111 mm to ⌀56 mm in STL format. Total length of this coupler is 160 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 70 mm. The ends are raw.

Straight sleeve ⌀111 mm to ⌀79 mm in STL 3D format. Length of this fitting is 85 mm. The larger-diameter tube has a thickness of 3 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 20 mm. The two axes of the tubes are off-center by 14.9 mm. The ends feature an external fillet to make tube connection easier.

Inline tube coupler ⌀112 mm to ⌀75 mm in STL 3D format. Length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.

Straight tube coupler ⌀112 mm to ⌀110 mm in STL format. Length of this junction is 80 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are rounded on the outside to ease the connection.

Straight tube reducer ⌀113 mm to ⌀40 mm in STL format. Length of this coupler is 65 mm. The larger-diameter tube has a thickness of 3 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 18 mm and a length of 20 mm. The ends have no fillet.

Tube fitting ⌀113 mm to ⌀40 mm in STL 3D format. Final length of this reducer is 65 mm. The larger-diameter tube has a thickness of 3 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 18 mm and a length of 20 mm. The axes of the tubes are offset by 37 mm. The ends are not rounded.

Tube junction ⌀113 mm to ⌀40 mm in STL format. Final length of this coupler is 85 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 25 mm. The smaller-diameter tube has a thickness of 18 mm and a length of 20 mm. The ends are raw.

Tube junction ⌀113 mm to ⌀40 mm in STL format. Total length of this reducer is 85 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 20 mm. The ends have no fillet.

Tube adapter ⌀113 mm to ⌀98 mm in STL format. Length of this reducer is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are raw.

Straight tube adapter ⌀114 mm to ⌀76 mm in STL 3D format. Length of this sleeve is 500 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 100 mm, the smaller one of 100 mm as well. The ends are not rounded.

Diameter adapter ⌀114 mm to ⌀88 mm in STL 3D format. Final length of this junction is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends are rounded on the inside to ease the connection.

Straight tube fitting ⌀114 mm to ⌀79 mm in STL 3D format. Length of this adapter is 111 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 48 mm, the smaller one of 48 mm as well. The ends are not rounded.

Inline fitting ⌀115 mm to ⌀105 mm in STL 3D format. Final length of this fitting is 120 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The axes of the tubes are off-center by 4.9 mm. The ends feature a fillet to facilitate the connection of the two tubes.

Inline tube adapter ⌀115 mm to ⌀100 mm in STL format. Total length of this sleeve is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Inline tubing adapter ⌀115 mm to ⌀65 mm in STL format. Length of this fitting is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 40 mm. The ends are rounded on the outside.

Straight tube fitting ⌀115 mm to ⌀62 mm in STL format. Length of this fitting is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 40 mm. The ends are rounded on the outside to ease the connection.

Inline sleeve ⌀115 mm to ⌀74 mm in STL format. Length of this connector is 75 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 20 mm. The axes of the tubes are offset by 15 mm. The ends are rounded on the outside to facilitate the connection of the two tubes.

Straight tubing adapter ⌀115 mm to ⌀80 mm in STL format. Length of this adapter is 100 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 35 mm as well. The ends have no fillet.

Inline tubing adapter ⌀115 mm to ⌀90 mm in STL format. Final length of this fitting is 180 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 60 mm as well. The two axes of the tubes are offset by 12 mm. The ends have a fillet on the inside to facilitate the connection of the two tubes.

Tube adapter ⌀116 mm to ⌀100 mm in STL 3D format. Length of this junction is 113 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are not rounded.