Custom Tube adapter STL file ⌀ 110–40 mm (Length: 215 mm) 📦#1693

Tubing reducer ⌀69 mm to ⌀37 mm in STL format. Final length of this connector is 230 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 100 mm, the smaller one of 100 mm as well. The ends have a fillet to make tube connection easier.

Tube coupler ⌀110 mm to ⌀90 mm in STL 3D format. Length of this connector is 215 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 100 mm, the smaller one of 100 mm as well. The ends are rounded on the outside.

Inline sleeve ⌀152 mm to ⌀98 mm in STL 3D format. Total length of this fitting is 190 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 100 mm. The ends have a fillet to make tube connection easier.

Inline tube coupler ⌀110 mm to ⌀100 mm in STL 3D format. Final length of this fitting is 225 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 110 mm, the smaller one of 100 mm. The ends have a fillet on the outside.

Inline tube reducer ⌀104 mm to ⌀90 mm in STL format. Total length of this connector is 219 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 100 mm, the smaller one of 89 mm. The ends feature an external fillet to make tube connection easier.

Inline tube reducer ⌀111 mm to ⌀100 mm in STL format. Length of this connector is 180 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 80 mm, the smaller one of 80 mm as well. The ends feature an external fillet to facilitate the connection of the two tubes.

Tube connector ⌀111 mm to ⌀90 mm in STL format. Final length of this adapter is 170 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 70 mm, the smaller one of 80 mm. The ends have a fillet on the outside to ease the connection.

Straight tube adapter ⌀123 mm to ⌀58 mm in STL format. Length of this reducer is 120 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The two axes of the tubes are off-center by 4.9 mm. The ends feature a fillet to facilitate the connection of the two tubes.

Straight tube fitting ⌀100 mm to ⌀79 mm in STL 3D format. Total length of this sleeve is 240 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 100 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 100 mm as well. The axes of the tubes are offset by 11.4 mm. The ends feature an external fillet.

Tube reducer ⌀100 mm to ⌀70 mm in STL format. Final length of this sleeve is 120 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are rounded to make tube connection easier.

Inline tube coupler ⌀80 mm to ⌀65 mm in STL format. Length of this sleeve is 255 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 150 mm, the smaller one of 100 mm. The ends have a fillet on the outside to ease the connection.

Inline tube adapter ⌀50 mm to ⌀49 mm in STL 3D format. Length of this fitting is 200 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 100 mm, the smaller one of 90 mm. The ends have a fillet on the inside.

Tube connector ⌀85 mm to ⌀54 mm in STL format. Total length of this junction is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 55 mm. The axes of the tubes are offset by 5 mm. The ends have a fillet.

Straight tube reducer ⌀90 mm to ⌀75 mm in STL 3D format. Length of this adapter is 255 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 150 mm, the smaller one of 100 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.

Inline tube junction ⌀96 mm to ⌀49 mm in STL 3D format. Final length of this connector is 120 mm. The larger-diameter tube has a thickness of 4 mm and a length of 60 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm. The ends have a fillet to make tube connection easier.

Tubing reducer ⌀85 mm to ⌀75 mm in STL 3D format. Length of this fitting is 255 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 150 mm, the smaller one of 100 mm. The ends have a fillet on the outside to make tube connection easier.

Tube adapter ⌀110 mm to ⌀75 mm in STL format. Total length of this junction is 205 mm. The larger-diameter tube has a thickness of 5 mm and a length of 100 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 100 mm as well. The ends are raw.

Tube fitting ⌀60 mm to ⌀50 mm in STL 3D format. Length of this fitting is 230 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 100 mm, the smaller one of 100 mm as well. The ends have no fillet.

Straight tube coupler ⌀96 mm to ⌀53 mm in STL 3D format. Length of this coupler is 120 mm. The larger-diameter tube has a thickness of 4 mm and a length of 60 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm. The ends have a fillet on the inside to make tube connection easier.

Tube reducer ⌀42 mm to ⌀29 mm in STL 3D format. Total length of this sleeve is 140 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 40 mm. The ends are rounded to make tube connection easier.

Straight tube connector ⌀100 mm to ⌀30 mm in STL format. Length of this adapter is 130 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 40 mm. The ends are rounded to ease the connection.

Diameter adapter ⌀110 mm to ⌀100 mm in STL format. Final length of this sleeve is 270 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 150 mm, the smaller one of 100 mm. The ends have a fillet on the outside.

Inline fitting ⌀116 mm to ⌀115 mm in STL format. Final length of this junction is 145 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 70 mm, the smaller one of 70 mm as well. The ends have a fillet on the outside to ease the connection.

Inline fitting ⌀115 mm to ⌀105 mm in STL 3D format. Final length of this fitting is 120 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The axes of the tubes are off-center by 4.9 mm. The ends feature a fillet to facilitate the connection of the two tubes.

Straight tube adapter ⌀100 mm to ⌀79 mm in STL 3D format. Length of this junction is 240 mm. The larger-diameter tube has a thickness of 4 mm and a length of 100 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 100 mm as well. The ends have no fillet.

Tubing reducer ⌀155 mm to ⌀103 mm in STL 3D format. Length of this reducer is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends are rounded to make tube connection easier.

Straight tube adapter ⌀100 mm to ⌀60 mm in STL format. Length of this fitting is 100 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends feature a fillet to make tube connection easier.

Tube junction ⌀52 mm to ⌀25 mm in STL 3D format. Final length of this junction is 105 mm. The larger-diameter tube has a thickness of 6 mm and a sleeve length of 40 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 50 mm. The ends have a fillet to make tube connection easier.

Tube fitting ⌀108 mm to ⌀93 mm in STL format. Length of this sleeve is 190 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 100 mm, the smaller one of 75 mm. The two axes of the tubes are offset by 7.4 mm. The ends have no fillet.