Tube adapter ⌀ 110–90 mm (Length: 215 mm) 📦#1478
Generation date: 2025-08-30
3D model download
Free- inline-tube-adapter-lenA100mm-_model1478-nb0_dd{id}.stl : 6.2 Mo
STL
Mesh quality :
0.05
0.05
License: CC BY - Creative commons
(attribution - commercial use allowed)
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Template parameter | Value | Unit | Label | |
|---|---|---|---|---|
| #1 | side A length | 100 | mm | lenA |
| #2 | side A outer diameter | 110 | mm | diA |
| #3 | side A thickness | 5 | mm | thA |
| #4 | side B length | 100 | mm | lenB |
| #5 | side B outer diameter | 90 | mm | diB |
| #6 | side B thickness | 5 | mm | thB |
| #7 | transition length | 15 | mm | tra |
| #8 | axis offset | 0 | mm | ofs |
| #9 | ends fillet | 1 | fil | |
Representation of the parameters
The transition refers to the connection interface between the two tubes. It defines the total length of the adapter, which is equal to the sum of the tube lengths plus the length of the transition.
Details for parameter #9 ends fillet:
- 0: no fillet
- 1: fillet on the outside
- 2: fillet on the inside
- 3: fillet on both inside and outside
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tube adapter ⌀ 110–100 mm (Length: 225 mm) (📦 #1479)
1 object(s) - format STL
Inline tube junction ⌀110 mm to ⌀100 mm in STL format. Final length of this fitting is 225 mm. The thickness of the tubes is identical: 5 mm. The ends have a fillet on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 110 | mm |
| side A outer diameter | 110 | mm |
| side A thickness | 5 | mm |
| side B length | 100 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 5 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 111–100 mm (Length: 180 mm) (📦 #1551)
1 object(s) - format STL
Inline tube reducer ⌀111 mm to ⌀100 mm in STL format. Length of this coupler is 180 mm. The thickness of the tubes is identical: 5 mm. The ends have a fillet on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 80 | mm |
| side A outer diameter | 111 | mm |
| side A thickness | 5 | mm |
| side B length | 80 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 5 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 111–90 mm (Length: 170 mm) (📦 #1550)
1 object(s) - format STL
Tube adapter ⌀111 mm to ⌀90 mm in STL format. Total length of this sleeve is 170 mm. The thickness of the tubes is identical: 5 mm. The ends are rounded on the outside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 70 | mm |
| side A outer diameter | 111 | mm |
| side A thickness | 5 | mm |
| side B length | 80 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 5 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 110–100 mm (Length: 270 mm) (📦 #1477)
1 object(s) - format STL
Diameter adapter ⌀110 mm to ⌀100 mm in STL format. Total length of this connector is 270 mm. The thickness of the tubes is identical: 5 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 150 | mm |
| side A outer diameter | 110 | mm |
| side A thickness | 5 | mm |
| side B length | 100 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 5 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 135–100 mm (Length: 140 mm) (📦 #1463)
1 object(s) - format STL
Straight tube fitting ⌀135 mm to ⌀100 mm in STL format. Final length of this coupler is 140 mm. The thickness of the tubes is identical: 5 mm. The ends feature an external fillet to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 135 | mm |
| side A thickness | 5 | mm |
| side B length | 50 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 5 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 160–90 mm (Length: 250 mm) (📦 #1365)
1 object(s) - format STL
Inline fitting ⌀160 mm to ⌀90 mm in STL format. Final length of this connector is 250 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 5 mm. The axes of the tubes are offset. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 110 | mm |
| side A outer diameter | 160 | mm |
| side A thickness | 4 | mm |
| side B length | 100 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 5 | mm |
| transition length | 40 | mm |
| axis offset | 25.4 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 86–81 mm (Length: 111 mm) (📦 #1215)
1 object(s) - format STL (5.0/5) 1 vote(s)
Inline tube junction ⌀86 mm to ⌀81 mm in STL format. Final length of this adapter is 111 mm. The thickness of the tubes is identical: 3 mm. The ends are rounded on the outside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 86 | mm |
| side A thickness | 3 | mm |
| side B length | 45 | mm |
| side B outer diameter | 81 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 80–75 mm (Length: 111 mm) (📦 #1214)
1 object(s) - format STL
Tube connector ⌀80 mm to ⌀75 mm in STL format. Final length of this adapter is 111 mm. The thickness of the tubes is identical: 3 mm. The ends are rounded on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 60–45 mm (Length: 100 mm) (📦 #1228)
1 object(s) - format STL
Straight tube coupler ⌀60 mm to ⌀45 mm in STL format. Total length of this connector is 100 mm. The thickness of the tubes is identical: 4 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 45 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 133–90 mm (Length: 240 mm) (📦 #1426)
1 object(s) - format STL
Inline tube adapter ⌀133 mm to ⌀90 mm in STL format. Length of this connector is 240 mm. The thickness of the tubes is identical: 8 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 100 | mm |
| side A outer diameter | 133 | mm |
| side A thickness | 8 | mm |
| side B length | 100 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 8 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 160–90 mm (Length: 250 mm) (📦 #1364)
1 object(s) - format STL
Straight tube fitting ⌀160 mm to ⌀90 mm in STL format. Length of this sleeve is 250 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 5 mm. The two axes of the tubes are offset. The ends have a fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 110 | mm |
| side A outer diameter | 160 | mm |
| side A thickness | 4 | mm |
| side B length | 100 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 5 | mm |
| transition length | 40 | mm |
| axis offset | 25.4 | mm |
| ends fillet | 3 |
Tube adapter ⌀ 120–93 mm (Length: 110 mm) (📦 #1431)
1 object(s) - format STL
Tube coupler ⌀120 mm to ⌀93 mm in STL format. Length of this adapter is 110 mm. The thickness of the tubes is identical: 5 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 120 | mm |
| side A thickness | 5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 93 | mm |
| side B thickness | 5 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 150–96 mm (Length: 150 mm) (📦 #1468)
1 object(s) - format STL
Straight tube adapter ⌀150 mm to ⌀96 mm in STL format. Length of this fitting is 150 mm. The thickness of the tubes is identical: 3 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 96 | mm |
| side B thickness | 3 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 140–93 mm (Length: 110 mm) (📦 #1432)
1 object(s) - format STL
Tube adapter ⌀140 mm to ⌀93 mm in STL format. Final length of this coupler is 110 mm. The thickness of the tubes is identical: 5 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 140 | mm |
| side A thickness | 5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 93 | mm |
| side B thickness | 5 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 120–90 mm (Length: 75 mm) (📦 #1164)
1 object(s) - format STL
Inline tube coupler ⌀120 mm to ⌀90 mm in STL format. Final length of this connector is 75 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 3 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 120 | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 80–70 mm (Length: 65 mm) (📦 #1263)
1 object(s) - format STL
Inline tube adapter ⌀80 mm to ⌀70 mm in STL format. Final length of this reducer is 65 mm. The thickness of the tubes is identical: 4 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 70 | mm |
| side B thickness | 4 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 80–75 mm (Length: 101 mm) (📦 #1219)
1 object(s) - format STL
Diameter adapter ⌀80 mm to ⌀75 mm in STL format. Final length of this adapter is 101 mm. The thickness of the tubes is identical: 2.5 mm. The axes of the tubes are offset. The ends are rounded on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2.5 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2.5 | mm |
| transition length | 10 | mm |
| axis offset | 2.4 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 80–75 mm (Length: 111 mm) (📦 #1218)
1 object(s) - format STL
Inline fitting ⌀80 mm to ⌀75 mm in STL format. Total length of this sleeve is 111 mm. The thickness of the tubes is identical: 2.5 mm. The axes of the tubes are offset. The ends have a fillet on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2.5 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2.5 | mm |
| transition length | 20 | mm |
| axis offset | 2.4 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 80–50 mm (Length: 120 mm) (📦 #1146)
1 object(s) - format STL
Tube reducer ⌀80 mm to ⌀50 mm in STL format. Total length of this adapter is 120 mm. The thickness of the tubes is identical: 5 mm. The two axes of the tubes are off-center. The ends are rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 5 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 5 | mm |
| transition length | 30 | mm |
| axis offset | 14.9 | mm |
| ends fillet | 3 |
Tube adapter ⌀ 80–75 mm (Length: 100 mm) (📦 #1220)
1 object(s) - format STL
Tube junction ⌀80 mm to ⌀75 mm in STL format. Final length of this adapter is 100 mm. The thickness of the tubes is identical: 2.5 mm. The axes of the tubes are offset. The ends are rounded on the outside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2.5 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2.5 | mm |
| transition length | 10 | mm |
| axis offset | 2.4 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 60–40 mm (Length: 85 mm) (📦 #1123)
1 object(s) - format STL
Straight sleeve ⌀60 mm to ⌀40 mm in STL format. Total length of this reducer is 85 mm. The thickness of the tubes is identical: 3 mm. The axes of the tubes are offset. The ends feature an external fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 60 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 40 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 1 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 68–53 mm (Length: 65 mm) (📦 #1233)
1 object(s) - format STL
Inline tube adapter ⌀68 mm to ⌀53 mm in STL format. Final length of this reducer is 65 mm. The thickness of the tubes is identical: 4 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 68 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 53 | mm |
| side B thickness | 4 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 150–90 mm (Length: 200 mm) (📦 #1372)
1 object(s) - format STL
Inline tube junction ⌀150 mm to ⌀90 mm in STL format. Final length of this junction is 200 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 2 | mm |
| side B length | 100 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 68–52 mm (Length: 65 mm) (📦 #1231)
1 object(s) - format STL
Tube adapter ⌀68 mm to ⌀52 mm in STL format. Length of this coupler is 65 mm. The thickness of the tubes is identical: 4 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 68 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 52 | mm |
| side B thickness | 4 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 149–100 mm (Length: 200 mm) (📦 #1288)
1 object(s) - format STL (5.0/5) 2 vote(s)
Straight tube adapter ⌀149 mm to ⌀100 mm in STL format. Final length of this junction is 200 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 149 | mm |
| side A thickness | 2 | mm |
| side B length | 100 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 2 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 150–120 mm (Length: 108 mm) (📦 #1105)
1 object(s) - format STL
Tube adapter ⌀150 mm to ⌀120 mm in STL format. Total length of this sleeve is 108 mm. The thickness of the tubes is identical: 5 mm. The axes of the tubes are offset. The ends are rounded on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 22.5 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 5 | mm |
| side B length | 35.5 | mm |
| side B outer diameter | 120 | mm |
| side B thickness | 5 | mm |
| transition length | 50 | mm |
| axis offset | 14 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 64–49 mm (Length: 63 mm) (📦 #1229)
1 object(s) - format STL
Tube reducer ⌀64 mm to ⌀49 mm in STL format. Final length of this fitting is 63 mm. The thickness of the tubes is identical: 4 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 64 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 49 | mm |
| side B thickness | 4 | mm |
| transition length | 13 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 100–51 mm (Length: 160 mm) (📦 #1340)
1 object(s) - format STL
Tube junction ⌀100 mm to ⌀51 mm in STL format. Final length of this adapter is 160 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 5 mm. The two axes of the tubes are offset. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 4 | mm |
| side B length | 40 | mm |
| side B outer diameter | 51 | mm |
| side B thickness | 5 | mm |
| transition length | 60 | mm |
| axis offset | 25.4 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 77–50 mm (Length: 125 mm) (📦 #1555)
1 object(s) - format STL
Straight tube connector ⌀77 mm to ⌀50 mm in STL format. Total length of this reducer is 125 mm. The thickness of the tubes is identical: 2.5 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 77 | mm |
| side A thickness | 2.5 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2.5 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 77–50 mm (Length: 125 mm) (📦 #1556)
1 object(s) - format STL
Inline tube adapter ⌀77 mm to ⌀50 mm in STL format. Length of this sleeve is 125 mm. The thickness of the tubes is identical: 2.5 mm. The two axes of the tubes are off-center. The ends feature an external fillet to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 77 | mm |
| side A thickness | 2.5 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2.5 | mm |
| transition length | 40 | mm |
| axis offset | 1 | mm |
| ends fillet | 1 |