Inline tube adapter 3D Files - Side A outer diameter 100 to 150 mm | page 12

Tubing adapter ⌀125 mm to ⌀90 mm in STL 3D format. Length of this fitting is 75 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 40 mm. The ends have no fillet.

Inline tube junction ⌀125 mm to ⌀90 mm in STL format. Final length of this coupler is 100 mm. The larger-diameter tube has a thickness of 5 mm and a length of 40 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 40 mm as well. The ends are raw.

Straight tube reducer ⌀125 mm to ⌀110 mm in STL 3D format. Final length of this adapter is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Inline tube junction ⌀126 mm to ⌀80 mm in STL format. Length of this junction is 97 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 27 mm, the smaller one of 30 mm. The ends are rounded on the inside to make tube connection easier.

Straight tube reducer ⌀126 mm to ⌀85 mm in STL format. Final length of this fitting is 71 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 27 mm, the smaller one of 31 mm. The ends are not rounded.

Diameter adapter ⌀126 mm to ⌀91 mm in STL 3D format. Total length of this sleeve is 71 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 27 mm, the smaller one of 31 mm. The ends have no fillet.

Inline fitting ⌀126 mm to ⌀125 mm in STL format. Final length of this connector is 145 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 70 mm, the smaller one of 70 mm as well. The ends are raw.

Straight tube coupler ⌀126 mm to ⌀120 mm in STL 3D format. Total length of this junction is 210 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 160 mm, the smaller one of 40 mm. The ends are not rounded.

Tube coupler ⌀126 mm to ⌀95 mm in STL format. Final length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Tube adapter ⌀127 mm to ⌀78 mm in STL 3D format. Total length of this junction is 105 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are raw.

Inline tube coupler ⌀127 mm to ⌀78 mm in STL 3D format. Total length of this junction is 85 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are raw.

Straight sleeve ⌀127 mm to ⌀100 mm in STL format. Final length of this sleeve is 45 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 20 mm. The ends are raw.

Tube coupler ⌀127 mm to ⌀50 mm in STL 3D format. Final length of this adapter is 120 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are rounded on the outside to facilitate the connection of the two tubes.

Inline tube coupler ⌀128 mm to ⌀98 mm in STL format. Final length of this adapter is 71 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 21 mm. The ends are raw.

Tubing adapter ⌀128 mm to ⌀81 mm in STL 3D format. Final length of this junction is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends feature an external fillet.

Diameter adapter ⌀129 mm to ⌀60 mm in STL 3D format. Length of this reducer is 130 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 30 mm. The ends are raw.

Tubing adapter ⌀129 mm to ⌀106 mm in STL format. Total length of this junction is 95 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 20 mm. The ends have no fillet.

Tube adapter ⌀129 mm to ⌀78 mm in STL format. Final length of this fitting is 105 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.

Straight tube fitting ⌀129 mm to ⌀100 mm in STL 3D format. Final length of this sleeve is 75 mm. The larger-diameter tube has a thickness of 2 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 25 mm as well. The axes of the tubes are offset by 10 mm. The ends are rounded to make tube connection easier.

Inline sleeve ⌀129 mm to ⌀100 mm in STL 3D format. Total length of this reducer is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.

Tube connector ⌀130 mm to ⌀100 mm in STL format. Final length of this sleeve is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 25 mm. The axes of the tubes are offset by 1 mm. The ends have no fillet.

Inline tube adapter ⌀130 mm to ⌀107 mm in STL format. Final length of this sleeve is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.

Straight tube coupler ⌀130 mm to ⌀107 mm in STL 3D format. Length of this fitting is 75 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are raw.

Straight tubing adapter ⌀130 mm to ⌀101 mm in STL format. Total length of this junction is 88 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 47 mm, the smaller one of 18 mm. The ends have no fillet.

Straight tubing adapter ⌀130 mm to ⌀110 mm in STL 3D format. Final length of this reducer is 150 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 40 mm. The ends are not rounded.

Straight tubing adapter ⌀130 mm to ⌀110 mm in STL format. Final length of this fitting is 140 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 40 mm. The ends are not rounded.

Inline tube junction ⌀130 mm to ⌀100 mm in STL 3D format. Final length of this junction is 60 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Inline tube reducer ⌀130 mm to ⌀106 mm in STL format. Length of this fitting is 137 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 23 mm, the smaller one of 77 mm. The ends are not rounded.

Inline tube adapter ⌀130 mm to ⌀124 mm in STL format. Length of this adapter is 105 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are raw.

Tube fitting ⌀130 mm to ⌀120 mm in STL format. Length of this connector is 65 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 20 mm. The ends are not rounded.