Inline tube adapter 3D Files - Side A outer diameter 100 to 150 mm | page 11

Inline tube junction ⌀123 mm to ⌀58 mm in STL 3D format. Final length of this junction is 70 mm. The larger-diameter tube has a thickness of 5 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 25 mm as well. The ends feature a fillet to make tube connection easier.

Straight tube adapter ⌀123 mm to ⌀58 mm in STL format. Length of this reducer is 120 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The two axes of the tubes are off-center by 4.9 mm. The ends feature a fillet to facilitate the connection of the two tubes.

Inline tube junction ⌀123 mm to ⌀93 mm in STL 3D format. Total length of this sleeve is 59 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 24 mm. The ends are raw.

Tube coupler ⌀123 mm to ⌀94 mm in STL format. Total length of this sleeve is 59 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 24 mm. The ends are raw.

Tube fitting ⌀123 mm to ⌀92 mm in STL 3D format. Length of this connector is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are raw.

Straight tube reducer ⌀123 mm to ⌀93 mm in STL format. Total length of this connector is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.

Inline fitting ⌀123 mm to ⌀92 mm in STL format. Length of this fitting is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.

Straight tubing adapter ⌀123 mm to ⌀110 mm in STL 3D format. Final length of this adapter is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.

Tube junction ⌀123 mm to ⌀100 mm in STL format. Total length of this junction is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 30 mm. The ends are raw.

Straight sleeve ⌀124 mm to ⌀103 mm in STL format. Total length of this coupler is 120 mm. The thickness of the tubes is identical: 6 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are rounded to make tube connection easier.

Inline tube coupler ⌀124 mm to ⌀119 mm in STL format. Total length of this adapter is 40 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 10 mm. The ends are not rounded.

Tubing reducer ⌀124 mm to ⌀102 mm in STL 3D format. Length of this reducer is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.

Tube reducer ⌀124 mm to ⌀96 mm in STL 3D format. Final length of this fitting is 151 mm. The larger-diameter tube has a thickness of 3 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 9 mm and a length of 63 mm. The ends feature an internal fillet.

Tube fitting ⌀124 mm to ⌀118 mm in STL format. Length of this junction is 210 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 160 mm, the smaller one of 40 mm. The ends are raw.

Straight tubing adapter ⌀124 mm to ⌀100 mm in STL 3D format. Length of this coupler is 325 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 300 mm. The ends have no fillet.

Straight tube reducer ⌀124 mm to ⌀100 mm in STL format. Total length of this connector is 55 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 30 mm. The ends have no fillet.

Tube coupler ⌀124 mm to ⌀100 mm in STL 3D format. Final length of this coupler is 95 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 30 mm. The ends have a fillet on the outside to make tube connection easier.

Inline tube junction ⌀125 mm to ⌀100 mm in STL 3D format. Length of this junction is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 25 mm. The axes of the tubes are off-center by 1 mm. The ends are not rounded.

Straight tube connector ⌀125 mm to ⌀124 mm in STL 3D format. Final length of this connector is 125 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends have no fillet.

Inline fitting ⌀125 mm to ⌀109 mm in STL 3D format. Length of this reducer is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet to ease the connection.

Inline tube coupler ⌀125 mm to ⌀107 mm in STL 3D format. Total length of this junction is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature a fillet to make tube connection easier.

Inline tube junction ⌀125 mm to ⌀105 mm in STL 3D format. Total length of this coupler is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet to ease the connection.

Straight tube adapter ⌀125 mm to ⌀113 mm in STL format. Length of this reducer is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet to facilitate the connection of the two tubes.

Straight tube coupler ⌀125 mm to ⌀80 mm in STL format. Total length of this junction is 105 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 40 mm. The ends are raw.

Inline fitting ⌀125 mm to ⌀80 mm in STL format. Total length of this sleeve is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are rounded on the outside.

Tube adapter ⌀125 mm to ⌀115 mm in STL 3D format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends feature an external fillet.

Inline tube adapter ⌀125 mm to ⌀110 mm in STL format. Final length of this fitting is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Inline tube adapter ⌀125 mm to ⌀124 mm in STL format. Length of this adapter is 144 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 70 mm, the smaller one of 69 mm. The ends feature an external fillet to facilitate the connection of the two tubes.

Straight tubing adapter ⌀125 mm to ⌀120 mm in STL format. Total length of this junction is 140 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 100 mm, the smaller one of 30 mm. The ends are not rounded.

Inline tube reducer ⌀125 mm to ⌀120 mm in STL 3D format. Total length of this sleeve is 210 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 160 mm, the smaller one of 40 mm. The ends are raw.