Inline tube adapter 3D Files - Side A outer diameter 5 to 100 mm | page 5

Straight tube adapter ⌀27 mm to ⌀21 mm in STL 3D format. Length of this fitting is 137 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 31 mm, the smaller one of 71 mm. The ends have no fillet.

Straight tube coupler ⌀27 mm to ⌀21 mm in STL 3D format. Total length of this sleeve is 395 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 300 mm. The ends have no fillet.

Inline tube junction ⌀27 mm to ⌀23 mm in STL format. Length of this junction is 162 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 31 mm, the smaller one of 71 mm. The ends have no fillet.

Tube junction ⌀27 mm to ⌀23 mm in STL format. Length of this fitting is 192 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 61 mm, the smaller one of 71 mm. The ends are raw.

Inline tube coupler ⌀27 mm to ⌀10 mm in STL format. Total length of this junction is 120 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 65 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 30 mm. The ends have a fillet.

Tube adapter ⌀27 mm to ⌀17 mm in STL format. Final length of this reducer is 65 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 20 mm. The ends are not rounded.

Inline tubing adapter ⌀27 mm to ⌀12 mm in STL 3D format. Total length of this fitting is 65 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 20 mm. The ends are not rounded.

Straight tube adapter ⌀27 mm to ⌀22 mm in STL format. Total length of this sleeve is 75 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature an external fillet to ease the connection.

Tube reducer ⌀27 mm to ⌀16 mm in STL 3D format. Total length of this reducer is 60 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 30 mm. The ends feature an internal fillet.

Straight tube reducer ⌀27 mm to ⌀16 mm in STL 3D format. Total length of this reducer is 60 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 30 mm. The axes of the tubes are offset by 5.4 mm. The ends have a fillet on the outside.

Inline tube coupler ⌀27 mm to ⌀25 mm in STL 3D format. Length of this junction is 185 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 150 mm. The two axes of the tubes are offset by 0.9 mm. The ends have no fillet.

Inline tubing adapter ⌀28 mm to ⌀10 mm in STL 3D format. Final length of this adapter is 72 mm. The larger-diameter tube has a thickness of 3 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 12 mm. The two axes of the tubes are off-center by 5 mm. The ends are rounded on the outside to ease the connection.

Diameter adapter ⌀28 mm to ⌀10 mm in STL format. Final length of this fitting is 72 mm. The larger-diameter tube has a thickness of 3 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 12 mm. The ends are rounded on the outside to ease the connection.

Tube fitting ⌀29 mm to ⌀15 mm in STL format. Total length of this connector is 195 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 175 mm. The two axes of the tubes are off-center by 2 mm. The ends are raw.

Tube adapter ⌀29 mm to ⌀16 mm in STL format. Final length of this fitting is 195 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 175 mm. The axes of the tubes are offset by 2 mm. The ends are not rounded.

Inline tubing adapter ⌀29 mm to ⌀25 mm in STL format. Final length of this adapter is 40 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 10 mm. The ends are not rounded.

Straight tube adapter ⌀29 mm to ⌀25 mm in STL format. Length of this junction is 230 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 200 mm. The ends are raw.

Straight tube adapter ⌀29 mm to ⌀21 mm in STL 3D format. Final length of this junction is 230 mm. The larger-diameter tube has a thickness of 4 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 200 mm. The ends are raw.

Straight tube connector ⌀29 mm to ⌀24 mm in STL 3D format. Total length of this reducer is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Inline tube coupler ⌀30 mm to ⌀26 mm in STL format. Total length of this connector is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 30 mm. The ends have no fillet.

Inline tube coupler ⌀30 mm to ⌀17 mm in STL format. Length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are rounded to make tube connection easier.

Inline tube coupler ⌀30 mm to ⌀18 mm in STL format. Final length of this reducer is 60 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 30 mm. The ends have a fillet on the outside to make tube connection easier.

Straight tube connector ⌀30 mm to ⌀8 mm in STL 3D format. Length of this adapter is 50 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 15 mm. The ends have no fillet.

Tubing reducer ⌀30 mm to ⌀10 mm in STL 3D format. Final length of this reducer is 35 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The axes of the tubes are offset by 8 mm. The ends are not rounded.

Tubing adapter ⌀30 mm to ⌀15 mm in STL 3D format. Final length of this junction is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 30 mm. The ends have a fillet on the inside.

Inline sleeve ⌀30 mm to ⌀27 mm in STL 3D format. Total length of this sleeve is 40 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 20 mm. The ends are not rounded.

Inline tubing adapter ⌀30 mm to ⌀26 mm in STL 3D format. Final length of this fitting is 40 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 20 mm. The ends are raw.

Inline tubing adapter ⌀30 mm to ⌀17 mm in STL format. Length of this junction is 55 mm. The larger-diameter tube has a thickness of 2 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 20 mm. The ends have a fillet to ease the connection.

Tubing reducer ⌀30 mm to ⌀25 mm in STL 3D format. Length of this connector is 120 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends are raw.

Inline tubing adapter ⌀30 mm to ⌀25 mm in STL format. Total length of this fitting is 185 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 150 mm. The axes of the tubes are off-center by 2.4 mm. The ends are not rounded.