Inline tube adapter 3D Files - Side A outer diameter 5 to 100 mm | page 4

Straight tube connector ⌀24 mm to ⌀10 mm in STL format. Final length of this fitting is 45 mm. The larger-diameter tube has a thickness of 2.7 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 10 mm. The ends feature an external fillet to make tube connection easier.

Tubing adapter ⌀24 mm to ⌀10 mm in STL 3D format. Total length of this reducer is 45 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 10 mm. The ends have a fillet on the outside to ease the connection.

Tube connector ⌀24 mm to ⌀9 mm in STL 3D format. Total length of this coupler is 30 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The axes of the tubes are off-center by 4 mm. The ends are raw.

Inline tube junction ⌀24 mm to ⌀23 mm in STL format. Length of this adapter is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 15 mm as well. The ends have no fillet.

Straight tube connector ⌀24 mm to ⌀19 mm in STL 3D format. Final length of this junction is 22 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 7 mm. The ends are not rounded.

Inline tubing adapter ⌀24 mm to ⌀17 mm in STL 3D format. Final length of this coupler is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 15 mm as well. The ends are raw.

Diameter adapter ⌀24 mm to ⌀14 mm in STL 3D format. Length of this sleeve is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends are not rounded.

Diameter adapter ⌀24 mm to ⌀20 mm in STL 3D format. Total length of this adapter is 29 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 12 mm, the smaller one of 12 mm as well. The two axes of the tubes are off-center by 1 mm. The ends are rounded to make tube connection easier.

Inline sleeve ⌀24 mm to ⌀20 mm in STL 3D format. Final length of this reducer is 36 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 15 mm as well. The two axes of the tubes are offset by 1.9 mm. The ends are rounded to ease the connection.

Tube fitting ⌀25 mm to ⌀20 mm in STL 3D format. Length of this reducer is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 15 mm as well. The ends feature an internal fillet to facilitate the connection of the two tubes.

Inline sleeve ⌀25 mm to ⌀7 mm in STL format. Total length of this connector is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 10 mm. The ends have no fillet.

Inline tubing adapter ⌀25 mm to ⌀10 mm in STL 3D format. Length of this fitting is 45 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 10 mm. The ends have a fillet on the outside to ease the connection.

Inline tube junction ⌀25 mm to ⌀10 mm in STL 3D format. Total length of this sleeve is 45 mm. The larger-diameter tube has a thickness of 2.3 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 10 mm. The ends have a fillet on the outside to ease the connection.

Inline tubing adapter ⌀25 mm to ⌀10 mm in STL 3D format. Total length of this adapter is 45 mm. The larger-diameter tube has a thickness of 2.2 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 10 mm. The ends feature an external fillet to ease the connection.

Tube connector ⌀25 mm to ⌀10 mm in STL 3D format. Final length of this adapter is 45 mm. The larger-diameter tube has a thickness of 2.4 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 10 mm. The ends feature an external fillet.

Tube junction ⌀25 mm to ⌀21 mm in STL format. Total length of this junction is 148 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 72 mm, the smaller one of 71 mm. The ends have no fillet.

Diameter adapter ⌀25 mm to ⌀21 mm in STL 3D format. Total length of this adapter is 137 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 31 mm, the smaller one of 71 mm. The ends have no fillet.

Tube adapter ⌀25 mm to ⌀11 mm in STL format. Final length of this connector is 65 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 15 mm. The axes of the tubes are off-center by 3.1 mm. The ends have no fillet.

Tube adapter ⌀25 mm to ⌀22 mm in STL format. Final length of this adapter is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Straight tube adapter ⌀25 mm to ⌀22 mm in STL 3D format. Total length of this adapter is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 15 mm as well. The ends have no fillet.

Straight tubing adapter ⌀25 mm to ⌀9 mm in STL 3D format. Length of this sleeve is 50 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 20 mm as well. The ends feature a fillet.

Inline tubing adapter ⌀25 mm to ⌀20 mm in STL 3D format. Length of this fitting is 45 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 5 mm, the smaller one of 20 mm. The ends are rounded on the outside to ease the connection.

Tube junction ⌀25 mm to ⌀20 mm in STL 3D format. Final length of this junction is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Inline sleeve ⌀25 mm to ⌀17 mm in STL 3D format. Length of this connector is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 15 mm as well. The ends are raw.

Inline tube adapter ⌀25 mm to ⌀19 mm in STL format. Final length of this sleeve is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 15 mm as well. The ends are raw.

Straight sleeve ⌀25 mm to ⌀19 mm in STL 3D format. Final length of this fitting is 65 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Straight tubing adapter ⌀25 mm to ⌀22 mm in STL format. Total length of this junction is 40 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 20 mm. The ends have no fillet.

Inline sleeve ⌀25 mm to ⌀20 mm in STL format. Final length of this sleeve is 35 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 15 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 15 mm as well. The ends are rounded to make tube connection easier.

Tube adapter ⌀26 mm to ⌀7 mm in STL format. Total length of this junction is 39 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 14 mm. The ends are raw.

Straight sleeve ⌀26 mm to ⌀10 mm in STL format. Length of this adapter is 45 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 10 mm. The ends are rounded on the outside.