O-ring 3D Files - Inner diameter (ID) 0.1 to 20 mm | page 4

Model(s) 91 to 120 of 164

O-ring STL 3D file ID 13 × CS 3 mm (📦 #1980)

1 object(s) - format STL
O-ring STL 3D file ID 13 × CS 3 mm
File of rubber ring with ID 13 mm by thickness 3  mm. Outer diameter (OD) resulting corresponds to 19 mm.
Parameter Value Unit
inner diameter (ID) 13 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 13 × CS 1 mm (📦 #2106)

1 object(s) - format STL
O-ring STL 3D file ID 13 × CS 1 mm
STL model of rubber ring with ID 13 mm / thickness 1  mm. Final diameter resulting is therefore 15 mm.
Parameter Value Unit
inner diameter (ID) 13 mm
cross section (CS) 1 mm

O-ring STL file ID 13 × CS 1.8 mm (📦 #2107)

1 object(s) - format STL
O-ring STL file ID 13 × CS 1.8 mm
File of rubber ring with dimensions Internal diameter (ID) 13 mm × thickness 1.8  mm. Final diameter corresponds to 16.6 mm.
Parameter Value Unit
inner diameter (ID) 13 mm
cross section (CS) 1.8 mm

O'ring STL 3D file ID 13 × CS 4 mm (📦 #3149)

1 object(s) - format STL
o'ring STL 3D file ID 13 × CS 4 mm
File of rubber ring with Internal diameter (ID) 13 mm / thickness 4  mm. Outer diameter (OD, for outer diameter) resulting is 21 mm.
Parameter Value Unit
inner diameter (ID) 13 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 13 × CS 1.5 mm (📦 #4076)

1 object(s) - format STL
O-ring STL 3D file ID 13 × CS 1.5 mm
STL file of circular seal with Inner diameter (ID) 13 mm / thickness 1.5  mm. Outer diameter (OD) is therefore 16 mm.
Parameter Value Unit
inner diameter (ID) 13 mm
cross section (CS) 1.5 mm

O-ring STL 3D file ID 13.1 × CS 5.6 mm (📦 #8670)

1 object(s) - format STL
O-ring STL 3D file ID 13.1 × CS 5.6 mm
3D file in STL format of O-ring with Internal diameter 13.1 mm by section thickness 5.6  mm. External diameter (OD) resulting corresponds to 24.3 mm.
Parameter Value Unit
inner diameter (ID) 13.1 mm
cross section (CS) 5.6 mm

O-ring STL 3D file ID 13.3 × CS 5.6 mm (📦 #8674)

1 object(s) - format STL
O-ring STL 3D file ID 13.3 × CS 5.6 mm
3D file in STL format of O-ring with dimensions ID (inner diameter) 13.3 mm by CS (cross section) 5.6  mm. Final diameter corresponds to 24.5 mm.
Parameter Value Unit
inner diameter (ID) 13.3 mm
cross section (CS) 5.6 mm

O-ring STL file ID 13.5 × CS 5.6 mm (📦 #8677)

1 object(s) - format STL
O-ring STL file ID 13.5 × CS 5.6 mm
STL file of sealing ring with Internal diameter (ID) 13.5 mm × section thickness 5.6  mm. The outer diameter resulting corresponds to 24.7 mm.
Parameter Value Unit
inner diameter (ID) 13.5 mm
cross section (CS) 5.6 mm

O-ring STL 3D file ID 13.5 × CS 7 mm (📦 #8768)

1 object(s) - format STL
O-ring STL 3D file ID 13.5 × CS 7 mm
3D file of O-ring (torus-shaped seal) with dimensions Inner diameter 13.5 mm by thickness 7  mm. Outer diameter (OD) is 27.5 mm.
Parameter Value Unit
inner diameter (ID) 13.5 mm
cross section (CS) 7 mm

O-ring STL 3D file ID 13.8 × CS 2 mm (📦 #8255)

1 object(s) - format STL
O-ring STL 3D file ID 13.8 × CS 2 mm
3D file of circular seal with dimensions Inner diameter (ID) 13.8 mm / section thickness 2  mm. External diameter (OD) corresponds to 17.8 mm.
Parameter Value Unit
inner diameter (ID) 13.8 mm
cross section (CS) 2 mm

O-ring STL file ID 13.8 × CS 5.6 mm (📦 #8680)

1 object(s) - format STL
O-ring STL file ID 13.8 × CS 5.6 mm
STL model of rubber ring with ID 13.8 mm by CS 5.6  mm. Outer diameter (OD, for outer diameter) resulting is therefore 25 mm.
Parameter Value Unit
inner diameter (ID) 13.8 mm
cross section (CS) 5.6 mm

O-ring STL 3D file ID 14 × CS 2.5 mm (📦 #1038)

1 object(s) - format STL
O-ring STL 3D file ID 14 × CS 2.5 mm
Model of O-ring with ID (inner diameter) 14 mm / section thickness 2.5  mm. Outer diameter (OD) is therefore 19 mm.
Parameter Value Unit
inner diameter (ID) 14 mm
cross section (CS) 2.5 mm

O-ring STL file ID 14 × CS 1.8 mm (📦 #1638)

1 object(s) - format STL
O-ring STL file ID 14 × CS 1.8 mm
File of O-ring (torus-shaped seal) with dimensions ID (inner diameter) 14 mm / section thickness 1.8  mm. The outer diameter corresponds to 17.6 mm.
Parameter Value Unit
inner diameter (ID) 14 mm
cross section (CS) 1.8 mm

O'ring STL file ID 14 × CS 3 mm (📦 #9431)

1 object(s) - format STL
o'ring STL file ID 14 × CS 3 mm
STL file of rubber ring with ID (inner diameter) 14 mm / CS (cross section) 3  mm. Outer diameter (OD, for outer diameter) corresponds to 20 mm.
Parameter Value Unit
inner diameter (ID) 14 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 14 × CS 1 mm (📦 #10960)

1 object(s) - format STL
O-ring STL 3D file ID 14 × CS 1 mm
3D model in STL format of sealing ring with Internal diameter (ID) 14 mm / section thickness 1  mm. Outer diameter (OD, for outer diameter) resulting is 16 mm.
Parameter Value Unit
inner diameter (ID) 14 mm
cross section (CS) 1 mm

O'ring STL 3D file ID 14 × CS 1.5 mm (📦 #12168)

1 object(s) - format STL
o'ring STL 3D file ID 14 × CS 1.5 mm
3D model in STL format of O-ring (torus-shaped seal) with ID 14 mm / section thickness 1.5  mm. External diameter (OD) resulting corresponds to 17 mm.
Parameter Value Unit
inner diameter (ID) 14 mm
cross section (CS) 1.5 mm

O-ring STL 3D file ID 14.1 × CS 2 mm (📦 #6555)

1 object(s) - format STL
O-ring STL 3D file ID 14.1 × CS 2 mm
3D file in STL format of rubber ring with dimensions Inner diameter 14.1 mm by CS 2  mm. External diameter (OD) is 18.1 mm.
Parameter Value Unit
inner diameter (ID) 14.1 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 14.2 × CS 1.4 mm (📦 #8146)

1 object(s) - format STL
O-ring STL 3D file ID 14.2 × CS 1.4 mm
STL file of sealing ring with dimensions ID 14.2 mm × CS (cross section) 1.4  mm. External diameter (OD) resulting corresponds to 17 mm.
Parameter Value Unit
inner diameter (ID) 14.2 mm
cross section (CS) 1.4 mm

O-ring STL 3D file ID 14.5 × CS 2.2 mm (📦 #7363)

1 object(s) - format STL
O-ring STL 3D file ID 14.5 × CS 2.2 mm
Model of O-ring with Inner diameter 14.5 mm / thickness 2.2  mm. Outer diameter (OD) is 18.9 mm.
Parameter Value Unit
inner diameter (ID) 14.5 mm
cross section (CS) 2.2 mm

O-ring STL 3D file ID 14.5 × CS 5.4 mm (📦 #8772)

1 object(s) - format STL
O-ring STL 3D file ID 14.5 × CS 5.4 mm
STL model of sealing ring with Internal diameter (ID) 14.5 mm × thickness 5.4  mm. Outer diameter (OD) is 25.3 mm.
Parameter Value Unit
inner diameter (ID) 14.5 mm
cross section (CS) 5.4 mm

O-ring STL file ID 14.6 × CS 1.9 mm (📦 #3230)

1 object(s) - format STL
O-ring STL file ID 14.6 × CS 1.9 mm
3D file in STL format of rubber ring with dimensions Inner diameter (ID) 14.6 mm × thickness 1.9  mm. Final diameter resulting corresponds to 18.4 mm.
Parameter Value Unit
inner diameter (ID) 14.6 mm
cross section (CS) 1.9 mm

O'ring STL 3D file ID 15 × CS 2.5 mm (📦 #1018)

1 object(s) - format STL
o'ring STL 3D file ID 15 × CS 2.5 mm
3D model of rubber ring with Inner diameter (ID) 15 mm / thickness 2.5  mm. The outer diameter resulting corresponds to 20 mm.
Parameter Value Unit
inner diameter (ID) 15 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 15 × CS 1.5 mm (📦 #1561)

1 object(s) - format STL
O-ring STL 3D file ID 15 × CS 1.5 mm
STL model of sealing ring with Inner diameter 15 mm / thickness 1.5  mm. The outer diameter resulting is therefore 18 mm.
Parameter Value Unit
inner diameter (ID) 15 mm
cross section (CS) 1.5 mm

O-ring STL file ID 15 × CS 2 mm (📦 #4367)

1 object(s) - format STL
O-ring STL file ID 15 × CS 2 mm
3D file in STL format of O-ring (torus-shaped seal) with Inner diameter 15 mm × CS 2  mm. External diameter (OD) is therefore 19 mm.
Parameter Value Unit
inner diameter (ID) 15 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 15 × CS 6 mm (📦 #7209)

1 object(s) - format STL
O-ring STL 3D file ID 15 × CS 6 mm
3D file in STL format of O-ring with Inner diameter (ID) 15 mm / CS (cross section) 6  mm. External diameter (OD) is 27 mm.
Parameter Value Unit
inner diameter (ID) 15 mm
cross section (CS) 6 mm

O-ring STL 3D file ID 15 × CS 5 mm (📦 #8760)

1 object(s) - format STL
O-ring STL 3D file ID 15 × CS 5 mm
Model of rubber ring with dimensions Inner diameter (ID) 15 mm by section thickness 5  mm. Final diameter is 25 mm.
Parameter Value Unit
inner diameter (ID) 15 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 15 × CS 7 mm (📦 #8767)

1 object(s) - format STL
O-ring STL 3D file ID 15 × CS 7 mm
Model of circular seal with Internal diameter 15 mm by section thickness 7  mm. The outer diameter resulting corresponds to 29 mm.
Parameter Value Unit
inner diameter (ID) 15 mm
cross section (CS) 7 mm

O-ring STL file ID 15.3 × CS 2.6 mm (📦 #4260)

1 object(s) - format STL
O-ring STL file ID 15.3 × CS 2.6 mm
File of circular seal with dimensions ID 15.3 mm × section thickness 2.6  mm. External diameter (OD) resulting corresponds to 20.5 mm.
Parameter Value Unit
inner diameter (ID) 15.3 mm
cross section (CS) 2.6 mm

O-ring STL 3D file ID 15.5 × CS 1 mm (📦 #7322)

1 object(s) - format STL
O-ring STL 3D file ID 15.5 × CS 1 mm
3D model of rubber ring with Internal diameter (ID) 15.5 mm × CS (cross section) 1  mm. Outer diameter (OD, for outer diameter) resulting is therefore 17.5 mm.
Parameter Value Unit
inner diameter (ID) 15.5 mm
cross section (CS) 1 mm

O-ring STL file ID 15.8 × CS 1.5 mm (📦 #2883)

1 object(s) - format STL
O-ring STL file ID 15.8 × CS 1.5 mm
Model of circular seal with ID 15.8 mm × CS (cross section) 1.5  mm. The outer diameter resulting is 18.8 mm.
Parameter Value Unit
inner diameter (ID) 15.8 mm
cross section (CS) 1.5 mm
Can't find the right model? Create it with your specs