Custom O-ring STL file ID 15.3 × CS 2.6 mm 📦#4260
Generation date: 2025-12-04
3D model download
Free- o-ring-ID15.3mm-CS2.6mm_model4_model4260-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 15.3 mm (≃0.60 in) |
| #2 | cross section (CS) | 2.6 mm (≃0.10 in) |
| Metadata | Value |
|---|---|
| outer diameter (OD) | 20.5 mm (≃13/16 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O-ring STL 3D file ID 16 × CS 2.62 mm (📦 #1043)
1 object(s) - format STL (5.0/5) 1 vote(s)
STL file of circular seal with ID (inner diameter) 16 mm / section thickness 2.62 mm. Final diameter corresponds to 21.24 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 16 | mm |
| cross section (CS) | 2.62 | mm |
O'ring STL 3D file ID 15 × CS 2.5 mm (📦 #1018)
1 object(s) - format STL
3D model of rubber ring with Inner diameter (ID) 15 mm / thickness 2.5 mm. The outer diameter resulting corresponds to 20 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 15 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 14 × CS 2.5 mm (📦 #1038)
1 object(s) - format STL
Model of O-ring with ID (inner diameter) 14 mm / section thickness 2.5 mm. Outer diameter (OD) is therefore 19 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 14 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL file ID 17 × CS 2.5 mm (📦 #1019)
1 object(s) - format STL
File of rubber ring with ID (inner diameter) 17 mm / CS 2.5 mm. Outer diameter (OD) resulting corresponds to 22 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 12.37 × CS 2.62 mm (📦 #1031)
1 object(s) - format STL (5.0/5) 2 vote(s)
3D file in STL format of sealing ring with Inner diameter (ID) 12.37 mm × section thickness 2.62 mm. The outer diameter resulting is 17.61 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12.37 | mm |
| cross section (CS) | 2.62 | mm |
O'ring STL 3D file ID 17.7 × CS 2.5 mm (📦 #8534)
1 object(s) - format STL
3D model of O-ring with Internal diameter 17.7 mm × CS 2.5 mm. Final diameter resulting is 22.7 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17.7 | mm |
| cross section (CS) | 2.5 | mm |
O'ring STL file ID 18.2 × CS 2.5 mm (📦 #2737)
1 object(s) - format STL
STL model of circular seal with ID (inner diameter) 18.2 mm × CS 2.5 mm. Outer diameter (OD, for outer diameter) is therefore 23.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 18.2 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 18.8 × CS 2.7 mm (📦 #5223)
1 object(s) - format STL
STL model of rubber ring with ID (inner diameter) 18.8 mm by thickness 2.7 mm. Outer diameter (OD) resulting corresponds to 24.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 18.8 | mm |
| cross section (CS) | 2.7 | mm |
O-ring STL 3D file ID 11.8 × CS 2.5 mm (📦 #1922)
1 object(s) - format STL
Model of O-ring with dimensions Inner diameter 11.8 mm × thickness 2.5 mm. Final diameter resulting is 16.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 11.8 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL file ID 15.9 × CS 2.4 mm (📦 #8453)
1 object(s) - format STL
3D file in STL format of sealing ring with dimensions ID 15.9 mm / CS 2.4 mm. Outer diameter (OD, for outer diameter) corresponds to 20.7 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 15.9 | mm |
| cross section (CS) | 2.4 | mm |
O-ring STL 3D file ID 11 × CS 2.5 mm (📦 #3289)
1 object(s) - format STL
3D model of rubber ring with dimensions Internal diameter 11 mm × thickness 2.5 mm. Final diameter resulting is therefore 16 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 11 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 19.8 × CS 2.5 mm (📦 #8423)
1 object(s) - format STL
3D file of circular seal with Inner diameter 19.8 mm / CS (cross section) 2.5 mm. Outer diameter (OD, for outer diameter) resulting is 24.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 19.8 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 20 × CS 2.5 mm (📦 #1030)
1 object(s) - format STL
3D model of sealing ring with dimensions Internal diameter 20 mm by section thickness 2.5 mm. External diameter (OD) resulting is 25 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 20 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 10.5 × CS 2.7 mm (📦 #4316)
1 object(s) - format STL
Model of sealing ring with Internal diameter (ID) 10.5 mm / CS (cross section) 2.7 mm. External diameter (OD) resulting is 15.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 10.5 | mm |
| cross section (CS) | 2.7 | mm |
O-ring STL 3D file ID 20.6 × CS 2.5 mm (📦 #8399)
1 object(s) - format STL
STL model of sealing ring with dimensions Internal diameter (ID) 20.6 mm × thickness 2.5 mm. Outer diameter (OD, for outer diameter) resulting is therefore 25.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 20.6 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL file ID 10 × CS 2.5 mm (📦 #1040)
1 object(s) - format STL
File of O-ring (torus-shaped seal) with ID (inner diameter) 10 mm / CS 2.5 mm. Outer diameter (OD) resulting is therefore 15 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 10 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL file ID 11 × CS 2.4 mm (📦 #3118)
1 object(s) - format STL
Model of rubber ring with Internal diameter (ID) 11 mm by CS (cross section) 2.4 mm. Outer diameter (OD) resulting is 15.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 11 | mm |
| cross section (CS) | 2.4 | mm |
O-ring STL file ID 19.6 × CS 2.4 mm (📦 #9058)
1 object(s) - format STL
3D model of circular seal with Internal diameter (ID) 19.6 mm by section thickness 2.4 mm. The outer diameter is therefore 24.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 19.6 | mm |
| cross section (CS) | 2.4 | mm |
O'ring STL file ID 22.5 × CS 2.5 mm (📦 #3232)
1 object(s) - format STL
3D file in STL format of sealing ring with dimensions ID 22.5 mm × CS 2.5 mm. Final diameter is 27.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 22.5 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 14.5 × CS 2.2 mm (📦 #7363)
1 object(s) - format STL
Model of O-ring with Inner diameter 14.5 mm / thickness 2.2 mm. Outer diameter (OD) is 18.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 14.5 | mm |
| cross section (CS) | 2.2 | mm |
O-ring STL file ID 16.4 × CS 3 mm (📦 #7321)
1 object(s) - format STL
3D file of rubber ring with dimensions Inner diameter 16.4 mm / thickness 3 mm. Outer diameter (OD) resulting is therefore 22.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 16.4 | mm |
| cross section (CS) | 3 | mm |
O'ring STL file ID 14 × CS 3 mm (📦 #9431)
1 object(s) - format STL
STL file of rubber ring with ID (inner diameter) 14 mm / CS (cross section) 3 mm. Outer diameter (OD, for outer diameter) corresponds to 20 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 14 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 17 × CS 3 mm (📦 #3838)
1 object(s) - format STL
3D file of O-ring (torus-shaped seal) with dimensions Inner diameter 17 mm by section thickness 3 mm. External diameter (OD) is 23 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 17.1 × CS 3 mm (📦 #9414)
1 object(s) - format STL
Model of O-ring with ID 17.1 mm by CS 3 mm. Outer diameter (OD) resulting corresponds to 23.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17.1 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 23.5 × CS 2.5 mm (📦 #3233)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with dimensions ID 23.5 mm by CS (cross section) 2.5 mm. Final diameter resulting corresponds to 28.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 23.5 | mm |
| cross section (CS) | 2.5 | mm |
O-ring STL 3D file ID 13 × CS 3 mm (📦 #1980)
1 object(s) - format STL
File of rubber ring with ID 13 mm by thickness 3 mm. Outer diameter (OD) resulting corresponds to 19 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 13 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 18 × CS 3 mm (📦 #8136)
1 object(s) - format STL
Model of circular seal with ID 18 mm / CS (cross section) 3 mm. Outer diameter (OD, for outer diameter) is 24 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 18 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 12.2 × CS 2.2 mm (📦 #1459)
1 object(s) - format STL
3D model of O-ring (torus-shaped seal) with dimensions Internal diameter 12.2 mm by section thickness 2.2 mm. The outer diameter is therefore 16.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12.2 | mm |
| cross section (CS) | 2.2 | mm |
O-ring STL 3D file ID 24 × CS 2.5 mm (📦 #3544)
1 object(s) - format STL
3D model of sealing ring with Inner diameter (ID) 24 mm × CS (cross section) 2.5 mm. External diameter (OD) resulting is 29 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 24 | mm |
| cross section (CS) | 2.5 | mm |