Round air vent grill 3D Files - Male diameter 50 to 100 mm | page 3

Model(s) 61 to 90 of 189

Round air vent STL file ∅ 71 mm, slat angle: 60° (📦 #2714)

1 object(s) - format STL
Round air vent STL file ∅ 71 mm, slat angle: 60°
3D model of a round grille for ventilation in STL format. Its insertion diameter is 71 mm. The slats have a steep angle of 60° and a low thickness of 1.6 mm. This vent cover features no flange.
Parameter Value Unit
male diameter 71 mm
slat angle 60 °
slat thickness 1.6 mm
flange width 0 mm
central reinforcement no

Round air vent STL 3D file ∅ 71 mm, slat angle: 10° (📦 #2715)

1 object(s) - format STL
Round air vent STL 3D file ∅ 71 mm, slat angle: 10°
3D model of a round grille for air circulation in STL format. Its male diameter is 71 mm. The slats have a slight angle of 10° and a low thickness of 1.6 mm. This vent cover features no flange.
Parameter Value Unit
male diameter 71 mm
slat angle 10 °
slat thickness 1.6 mm
flange width 0 mm
central reinforcement no

Round air vent STL file ∅ 71 mm, slat angle: 45° (📦 #11322)

1 object(s) - format STL
Round air vent STL file ∅ 71 mm, slat angle: 45°
3D design of a round air vent for air circulation in STL format. Its insertion diameter is 71 mm. The slats have an angle of 45° and a low thickness of 1.4 mm. This vent cover features a thin flange of 2 mm. The full diameter of this model is 75 mm.
Parameter Value Unit
male diameter 71 mm
slat angle 45 °
slat thickness 1.4 mm
flange width 2 mm
central reinforcement no

Round air vent STL file ∅ 71.2 mm, slat angle: 45° with central reinforcement (📦 #1396)

1 object(s) - format STL
Round air vent STL file ∅ 71.2 mm, slat angle: 45° with central reinforcement
3D design of a round grille for air circulation in STL format. Its male diameter measures 71.2 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A central reinforcement reinforces the slats. This vent cover has a thin flange of 5 mm. The total diameter of this model is 81.2 mm.
Parameter Value Unit
male diameter 71.2 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement yes

Round air vent STL 3D file ∅ 71.2 mm, slat angle: 45° with central reinforcement (📦 #1739)

1 object(s) - format STL
Round air vent STL 3D file ∅ 71.2 mm, slat angle: 45° with central reinforcement
Model of a round grille for ventilation in STL format. Its male diameter is 71.2 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A vertical reinforcement strengthens the slats. This aeration grille features a collar of 10 mm. The overall diameter of this model is 91.2 mm.
Parameter Value Unit
male diameter 71.2 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 71.2 mm, slat angle: 45° with central reinforcement (📦 #11353)

1 object(s) - format STL
Round air vent STL file ∅ 71.2 mm, slat angle: 45° with central reinforcement
3D design of a round air vent for ventilation in STL format. Its insertion diameter measures 71.2 mm. The slats have an angle of 45° and a low thickness of 1.4 mm. A vertical reinforcement reinforces the slats. This 3D ventilation grille features a flange of 10 mm. The total diameter of the model is 91.2 mm.
Parameter Value Unit
male diameter 71.2 mm
slat angle 45 °
slat thickness 1.4 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 71.5 mm, slat angle: 40° (📦 #1276)

1 object(s) - format STL
Round air vent STL file ∅ 71.5 mm, slat angle: 40°
File of a round air vent for ventilation in STL format. Its male diameter is 71.5 mm. The slats have an angle of 40° and a low thickness of 1.4 mm. This ventilation grille has a thin flange of 5 mm. The overall diameter of this model is 81.5 mm.
Parameter Value Unit
male diameter 71.5 mm
slat angle 40 °
slat thickness 1.4 mm
flange width 5 mm
central reinforcement no

Round air vent STL 3D file ∅ 71.5 mm, slat angle: 45° (📦 #11324)

1 object(s) - format STL
Round air vent STL 3D file ∅ 71.5 mm, slat angle: 45°
Model of a round vent cover for air circulation in STL format. Its male diameter measures 71.5 mm. The slats have an angle of 45° and a low thickness of 1.4 mm. This vent grille has a thin flange of 5 mm. The total diameter of the model is 81.5 mm.
Parameter Value Unit
male diameter 71.5 mm
slat angle 45 °
slat thickness 1.4 mm
flange width 5 mm
central reinforcement no

Round air vent STL file ∅ 72 mm, slat angle: 45° (📦 #10944)

1 object(s) - format STL
Round air vent STL file ∅ 72 mm, slat angle: 45°
3D file of a round vent cover for ventilation in STL format. Its insertion diameter measures 72 mm. The slats have an angle of 45° and a low thickness of 1.4 mm. This 3D vent cover has a prominent flange of 20 mm. The full diameter of this model is 112 mm.
Parameter Value Unit
male diameter 72 mm
slat angle 45 °
slat thickness 1.4 mm
flange width 20 mm
central reinforcement no

Round air vent STL 3D file ∅ 72 mm, slat angle: 45° with central reinforcement (📦 #11319)

1 object(s) - format STL
Round air vent STL 3D file ∅ 72 mm, slat angle: 45° with central reinforcement
File of a round vent cover for ventilation in STL format. Its male diameter measures 72 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A central reinforcement strengthens the whole structure. This 3D vent cover features a thin flange of 3 mm. The total diameter of the model is 78 mm.
Parameter Value Unit
male diameter 72 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 3 mm
central reinforcement yes

Round air vent STL 3D file ∅ 73.9 mm, slat angle: 45° with central reinforcement (📦 #4399)

1 object(s) - format STL
Round air vent STL 3D file ∅ 73.9 mm, slat angle: 45° with central reinforcement
Design of a round vent cover for ventilation in STL format. Its insertion diameter measures 73.9 mm. The slats have an angle of 45° and a low thickness of 1.4 mm. A vertical reinforcement reinforces the whole structure. This 3D ventilation grille features a prominent flange of 15 mm. The total diameter of this model is 103.9 mm.
Parameter Value Unit
male diameter 73.9 mm
slat angle 45 °
slat thickness 1.4 mm
flange width 15 mm
central reinforcement yes

Round air vent STL file ∅ 74 mm, slat angle: 40° with central reinforcement (📦 #4710)

1 object(s) - format STL
Round air vent STL file ∅ 74 mm, slat angle: 40° with central reinforcement
3D design of a round grille for ventilation in STL format. Its male diameter measures 74 mm. The slats have an angle of 40° and a high thickness of 2 mm. A centered vertical reinforcement strengthens the slats. This 3D vent cover features a flange of 9 mm. The overall diameter of the model is 92 mm.
Parameter Value Unit
male diameter 74 mm
slat angle 40 °
slat thickness 2 mm
flange width 9 mm
central reinforcement yes

Round air vent STL file ∅ 74 mm, slat angle: 10° (📦 #8918)

1 object(s) - format STL
Round air vent STL file ∅ 74 mm, slat angle: 10°
Model of a round grille for air circulation in STL format. Its male diameter is 74 mm. The slats have a slight angle of 10° and a low thickness of 1.6 mm. This ventilation grille features no flange.
Parameter Value Unit
male diameter 74 mm
slat angle 10 °
slat thickness 1.6 mm
flange width 0 mm
central reinforcement no

Round air vent STL file ∅ 74 mm, slat angle: 45° (📦 #10945)

1 object(s) - format STL
Round air vent STL file ∅ 74 mm, slat angle: 45°
3D design of a round grille for ventilation in STL format. Its male diameter is 74 mm. The slats have an angle of 45° and a low thickness of 1.4 mm. This ventilation grille has a prominent flange of 20 mm. The overall diameter of the model is 114 mm.
Parameter Value Unit
male diameter 74 mm
slat angle 45 °
slat thickness 1.4 mm
flange width 20 mm
central reinforcement no

Round air vent STL file ∅ 74.6 mm, slat angle: 30° with central reinforcement (📦 #11026)

1 object(s) - format STL
Round air vent STL file ∅ 74.6 mm, slat angle: 30° with central reinforcement
Design of a round air vent for ventilation in STL format. Its insertion diameter measures 74.6 mm. The slats have a slight angle of 30° and a high thickness of 2.2 mm. A central reinforcement strengthens the slats. This 3D vent cover features a prominent flange of 20 mm. The total diameter of the model is 114.6 mm.
Parameter Value Unit
male diameter 74.6 mm
slat angle 30 °
slat thickness 2.2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 75 mm, slat angle: 45° (📦 #2617)

1 object(s) - format STL
Round air vent STL file ∅ 75 mm, slat angle: 45°
Design of a round air vent for air circulation in STL format. Its male diameter is 75 mm. The slats have an angle of 45° and a high thickness of 2 mm. This vent cover features a prominent flange of 15 mm. The total diameter of the model is 105 mm.
Parameter Value Unit
male diameter 75 mm
slat angle 45 °
slat thickness 2 mm
flange width 15 mm
central reinforcement no

Round air vent STL file ∅ 75 mm, slat angle: 45° with central reinforcement (📦 #4067)

1 object(s) - format STL
Round air vent STL file ∅ 75 mm, slat angle: 45° with central reinforcement
Design of a round grille for ventilation in STL format. Its male diameter is 75 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A central reinforcement strengthens the whole structure. This 3D vent grille has a thin flange of 5 mm. The total diameter of this model is 85 mm.
Parameter Value Unit
male diameter 75 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement yes

Round air vent STL file ∅ 75 mm, slat angle: 10° with central reinforcement (📦 #5698)

1 object(s) - format STL
Round air vent STL file ∅ 75 mm, slat angle: 10° with central reinforcement
Model of a round air vent for ventilation in STL format. Its male diameter is 75 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A central reinforcement reinforces the slats. This aeration grille has a prominent flange of 15 mm. The full diameter of the model is 105 mm.
Parameter Value Unit
male diameter 75 mm
slat angle 10 °
slat thickness 2 mm
flange width 15 mm
central reinforcement yes

Round air vent STL 3D file ∅ 75 mm, slat angle: 40° with central reinforcement (📦 #5842)

1 object(s) - format STL
Round air vent STL 3D file ∅ 75 mm, slat angle: 40° with central reinforcement
3D file of a round grille for ventilation in STL format. Its insertion diameter measures 75 mm. The slats have an angle of 40° and a low thickness of 1.4 mm. A central reinforcement reinforces the whole structure. This vent grille has a flange of 10 mm. The full diameter of the model is 95 mm.
Parameter Value Unit
male diameter 75 mm
slat angle 40 °
slat thickness 1.4 mm
flange width 10 mm
central reinforcement yes

Round air vent STL 3D file ∅ 75 mm, slat angle: 30° with central reinforcement (📦 #7112)

1 object(s) - format STL
Round air vent STL 3D file ∅ 75 mm, slat angle: 30° with central reinforcement
Design of a round vent cover for ventilation in STL format. Its insertion diameter measures 75 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. A vertical reinforcement strengthens the whole structure. This vent grille features a thin flange of 4 mm. The overall diameter of this model is 83 mm.
Parameter Value Unit
male diameter 75 mm
slat angle 30 °
slat thickness 2 mm
flange width 4 mm
central reinforcement yes

Round air vent STL file ∅ 75 mm, slat angle: 30° with central reinforcement (📦 #7118)

1 object(s) - format STL
Round air vent STL file ∅ 75 mm, slat angle: 30° with central reinforcement
Model of a round air vent for ventilation in STL format. Its male diameter is 75 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. A central reinforcement reinforces the slats. This 3D ventilation grille has a thin flange of 2 mm. The overall diameter of the model is 79 mm.
Parameter Value Unit
male diameter 75 mm
slat angle 30 °
slat thickness 2 mm
flange width 2 mm
central reinforcement yes

Round air vent STL file ∅ 75 mm, slat angle: 45° (📦 #9244)

1 object(s) - format STL
Round air vent STL file ∅ 75 mm, slat angle: 45°
3D file of a round vent cover for air circulation in STL format. Its insertion diameter is 75 mm. The slats have an angle of 45° and a low thickness of 1.4 mm. This vent grille features a flange of 10 mm. The overall diameter of this model is 95 mm.
Parameter Value Unit
male diameter 75 mm
slat angle 45 °
slat thickness 1.4 mm
flange width 10 mm
central reinforcement no

Round air vent STL 3D file ∅ 75.5 mm, slat angle: 45° with central reinforcement (📦 #6672)

1 object(s) - format STL
Round air vent STL 3D file ∅ 75.5 mm, slat angle: 45° with central reinforcement
3D model of a round vent cover for ventilation in STL format. Its insertion diameter is 75.5 mm. The slats have an angle of 45° and a low thickness of 1.4 mm. A vertical reinforcement strengthens the whole structure. This vent grille features a prominent flange of 20 mm. The total diameter of this model is 115.5 mm.
Parameter Value Unit
male diameter 75.5 mm
slat angle 45 °
slat thickness 1.4 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 75.6 mm, slat angle: 30° (📦 #5861)

1 object(s) - format STL
Round air vent STL file ∅ 75.6 mm, slat angle: 30°
3D design of a round grille for air circulation in STL format. Its male diameter measures 75.6 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. This vent grille features a thin flange of 5 mm. The overall diameter of the model is 85.6 mm.
Parameter Value Unit
male diameter 75.6 mm
slat angle 30 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement no

Round air vent STL file ∅ 76 mm, slat angle: 45° (📦 #2619)

1 object(s) - format STL
Round air vent STL file ∅ 76 mm, slat angle: 45°
3D model of a round grille for air circulation in STL format. Its insertion diameter is 76 mm. The slats have an angle of 45° and a low thickness of 1.5 mm. This 3D vent grille features a prominent flange of 20 mm. The full diameter of this model is 116 mm.
Parameter Value Unit
male diameter 76 mm
slat angle 45 °
slat thickness 1.5 mm
flange width 20 mm
central reinforcement no

Round air vent STL 3D file ∅ 76.2 mm, slat angle: 10° (📦 #10834)

1 object(s) - format STL
Round air vent STL 3D file ∅ 76.2 mm, slat angle: 10°
3D model of a round air vent for ventilation in STL format. Its male diameter measures 76.2 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. This 3D vent grille has a flange of 10 mm. The total diameter of this model is 96.2 mm.
Parameter Value Unit
male diameter 76.2 mm
slat angle 10 °
slat thickness 2 mm
flange width 10 mm
central reinforcement no

Round air vent STL 3D file ∅ 77 mm, slat angle: 10° with central reinforcement (📦 #7477)

1 object(s) - format STL
Round air vent STL 3D file ∅ 77 mm, slat angle: 10° with central reinforcement
File of a round vent cover for air circulation in STL format. Its insertion diameter measures 77 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A vertical reinforcement secures the whole structure. This 3D vent cover features a thin flange of 5 mm. The overall diameter of this model is 87 mm.
Parameter Value Unit
male diameter 77 mm
slat angle 10 °
slat thickness 2 mm
flange width 5 mm
central reinforcement yes

Round air vent STL file ∅ 77 mm, slat angle: 10° with central reinforcement (📦 #8944)

1 object(s) - format STL
Round air vent STL file ∅ 77 mm, slat angle: 10° with central reinforcement
Model of a round air vent for air circulation in STL format. Its male diameter measures 77 mm. The slats have a slight angle of 10° and a low thickness of 1.6 mm. A centered vertical reinforcement secures the whole structure. This 3D vent grille has a prominent flange of 20 mm. The overall diameter of this model is 117 mm.
Parameter Value Unit
male diameter 77 mm
slat angle 10 °
slat thickness 1.6 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 77.5 mm, slat angle: 10° with central reinforcement (📦 #2529)

1 object(s) - format STL
Round air vent STL file ∅ 77.5 mm, slat angle: 10° with central reinforcement
Model of a round air vent for ventilation in STL format. Its insertion diameter is 77.5 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A vertical reinforcement strengthens the whole structure. This ventilation grille features a collar of 10 mm. The overall diameter of the model is 97.5 mm.
Parameter Value Unit
male diameter 77.5 mm
slat angle 10 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL 3D file ∅ 78 mm, slat angle: 30° (📦 #3597)

1 object(s) - format STL
Round air vent STL 3D file ∅ 78 mm, slat angle: 30°
3D design of a round air vent for ventilation in STL format. Its insertion diameter measures 78 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. This 3D vent cover features a prominent flange of 20 mm. The overall diameter of this model is 118 mm.
Parameter Value Unit
male diameter 78 mm
slat angle 30 °
slat thickness 2 mm
flange width 20 mm
central reinforcement no
Can't find the right model? Create it with your specs