Inline tube adapter 3D Files - Side A outer diameter 5 to 100 mm | page 25

Tube adapter ⌀88 mm to ⌀58 mm in STL 3D format. Length of this junction is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are raw.

Straight sleeve ⌀88 mm to ⌀76 mm in STL 3D format. Total length of this sleeve is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are rounded on the inside.

Tube junction ⌀88 mm to ⌀70 mm in STL 3D format. Length of this fitting is 45 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends feature a fillet to ease the connection.

Inline fitting ⌀88 mm to ⌀80 mm in STL format. Final length of this reducer is 120 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 60 mm. The ends have no fillet.

Inline tube reducer ⌀88 mm to ⌀82 mm in STL 3D format. Final length of this coupler is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Tube connector ⌀90 mm to ⌀68 mm in STL 3D format. Final length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 30 mm. The two axes of the tubes are offset by 10 mm. The ends are not rounded.

Inline tube coupler ⌀90 mm to ⌀50 mm in STL 3D format. Total length of this connector is 130 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 40 mm. The two axes of the tubes are offset by 1 mm. The ends feature an external fillet to make tube connection easier.

Tubing adapter ⌀90 mm to ⌀85 mm in STL 3D format. Final length of this junction is 39 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 18 mm, the smaller one of 16 mm. The ends are not rounded.

Straight tube adapter ⌀90 mm to ⌀80 mm in STL 3D format. Final length of this coupler is 48 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 18 mm, the smaller one of 25 mm. The ends have no fillet.

Inline tube reducer ⌀90 mm to ⌀82 mm in STL 3D format. Length of this sleeve is 48 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 18 mm, the smaller one of 25 mm. The ends have no fillet.

Inline tubing adapter ⌀90 mm to ⌀46 mm in STL format. Total length of this junction is 50 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 20 mm. The ends have no fillet.

Straight tube reducer ⌀90 mm to ⌀75 mm in STL 3D format. Length of this adapter is 255 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 150 mm, the smaller one of 100 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.

Inline tubing adapter ⌀90 mm to ⌀16 mm in STL 3D format. Total length of this sleeve is 60 mm. The larger-diameter tube has a thickness of 10 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 25 mm. The ends are not rounded.

Tube fitting ⌀90 mm to ⌀56 mm in STL format. Final length of this coupler is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Inline tube reducer ⌀90 mm to ⌀49 mm in STL format. Total length of this junction is 120 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 40 mm. The axes of the tubes are off-center by 20 mm. The ends are raw.

Inline tube reducer ⌀90 mm to ⌀60 mm in STL 3D format. Total length of this fitting is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Inline tube adapter ⌀90 mm to ⌀61 mm in STL 3D format. Total length of this reducer is 112 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 77 mm, the smaller one of 30 mm. The ends have no fillet.

Inline tube junction ⌀91 mm to ⌀50 mm in STL 3D format. Length of this adapter is 109 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The axes of the tubes are off-center by 20 mm. The ends are not rounded.

Inline sleeve ⌀92 mm to ⌀71 mm in STL 3D format. Total length of this adapter is 90 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 10 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 50 mm. The axes of the tubes are offset by 9.1 mm. The ends are raw.

Straight tube coupler ⌀92 mm to ⌀84 mm in STL 3D format. Length of this fitting is 164 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 76 mm, the smaller one of 76 mm as well. The ends are not rounded.

Straight tube fitting ⌀92 mm to ⌀63 mm in STL 3D format. Final length of this connector is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Straight tube connector ⌀93 mm to ⌀88 mm in STL 3D format. Length of this reducer is 105 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 60 mm. The ends are raw.

Tubing reducer ⌀93 mm to ⌀75 mm in STL 3D format. Length of this adapter is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature a fillet to make tube connection easier.

Straight tube fitting ⌀94 mm to ⌀90 mm in STL 3D format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature an external fillet to make tube connection easier.

Straight sleeve ⌀94 mm to ⌀60 mm in STL 3D format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The two axes of the tubes are offset by 15 mm. The ends are raw.

Inline sleeve ⌀94 mm to ⌀80 mm in STL 3D format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 50 mm. The axes of the tubes are off-center by 5.9 mm. The ends are rounded on the outside.

Tube reducer ⌀94 mm to ⌀80 mm in STL 3D format. Final length of this reducer is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are off-center by 5.9 mm. The ends feature an external fillet.

Straight tube coupler ⌀94 mm to ⌀80 mm in STL 3D format. Final length of this adapter is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The axes of the tubes are offset by 5.9 mm. The ends have a fillet on the outside to ease the connection.

Inline sleeve ⌀94 mm to ⌀79 mm in STL 3D format. Total length of this connector is 255 mm. The thickness of the tubes is identical: 10 mm. The larger-diameter tube has a sleeve length of 150 mm, the smaller one of 100 mm. The ends have a fillet on the outside.

Tubing adapter ⌀94 mm to ⌀90 mm in STL format. Final length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.