Inline tube adapter 3D Files - Side A outer diameter 5 to 100 mm | page 24

Tube adapter ⌀83 mm to ⌀40 mm in STL 3D format. Total length of this connector is 191 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 136 mm. The axes of the tubes are offset by 21 mm. The ends have no fillet.

Inline sleeve ⌀84 mm to ⌀70 mm in STL format. Final length of this junction is 255 mm. The thickness of the tubes is identical: 10 mm. The larger-diameter tube has a length of 150 mm, the smaller one of 100 mm. The ends feature an external fillet to make tube connection easier.

Inline tubing adapter ⌀84 mm to ⌀54 mm in STL format. Final length of this coupler is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 10 mm. The ends have no fillet.

Straight tube adapter ⌀84 mm to ⌀70 mm in STL format. Total length of this coupler is 30 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The axes of the tubes are off-center by 3 mm. The ends are raw.

Inline fitting ⌀84 mm to ⌀65 mm in STL 3D format. Final length of this sleeve is 95 mm. The larger-diameter tube has a thickness of 4 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 7 mm and a length of 35 mm. The ends have no fillet.

Tube connector ⌀84 mm to ⌀62 mm in STL format. Length of this reducer is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Inline tubing adapter ⌀84 mm to ⌀81 mm in STL 3D format. Total length of this connector is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 90 mm. The ends are not rounded.

Tube coupler ⌀85 mm to ⌀29 mm in STL format. Total length of this reducer is 140 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are off-center by 27 mm. The ends are not rounded.

Inline tube junction ⌀85 mm to ⌀29 mm in STL format. Length of this sleeve is 180 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The axes of the tubes are off-center by 27 mm. The ends have no fillet.

Tube coupler ⌀85 mm to ⌀60 mm in STL format. Final length of this connector is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.

Straight tube fitting ⌀85 mm to ⌀70 mm in STL 3D format. Length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 7.4 mm. The ends are raw.

Inline sleeve ⌀85 mm to ⌀65 mm in STL 3D format. Total length of this reducer is 111 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 45 mm as well. The ends have no fillet.

Tube connector ⌀85 mm to ⌀54 mm in STL format. Total length of this junction is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 55 mm. The axes of the tubes are offset by 5 mm. The ends have a fillet.

Tubing reducer ⌀85 mm to ⌀75 mm in STL 3D format. Length of this fitting is 255 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 150 mm, the smaller one of 100 mm. The ends have a fillet on the outside to make tube connection easier.

Inline tube reducer ⌀85 mm to ⌀70 mm in STL 3D format. Length of this coupler is 255 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 150 mm, the smaller one of 100 mm. The ends are raw.

Straight tube reducer ⌀85 mm to ⌀70 mm in STL format. Length of this connector is 30 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The axes of the tubes are offset by 4 mm. The ends are raw.

Inline tube coupler ⌀85 mm to ⌀63 mm in STL format. Total length of this fitting is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Tube adapter ⌀85 mm to ⌀59 mm in STL format. Length of this fitting is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.

Tube coupler ⌀85 mm to ⌀60 mm in STL 3D format. Final length of this connector is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 35 mm, the smaller one of 40 mm. The ends feature a fillet to facilitate the connection of the two tubes.

Tube adapter ⌀85 mm to ⌀46 mm in STL format. Final length of this fitting is 122 mm. The larger-diameter tube has a thickness of 2.3 mm and a length of 22 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 65 mm. The axes of the tubes are offset by 20 mm. The ends have no fillet.

Straight tubing adapter ⌀85 mm to ⌀46 mm in STL 3D format. Total length of this sleeve is 52 mm. The larger-diameter tube has a thickness of 2.3 mm and a length of 22 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 15 mm. The ends are raw.

Inline tube coupler ⌀86 mm to ⌀81 mm in STL format. Total length of this reducer is 111 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 46 mm, the smaller one of 45 mm. The ends are rounded on the outside to make tube connection easier.

Tube fitting ⌀86 mm to ⌀66 mm in STL format. Length of this reducer is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.

Straight tubing adapter ⌀86 mm to ⌀75 mm in STL format. Final length of this junction is 160 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 70 mm, the smaller one of 60 mm. The ends have no fillet.

Tube connector ⌀86 mm to ⌀80 mm in STL format. Final length of this reducer is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Inline tube junction ⌀86 mm to ⌀76 mm in STL format. Length of this connector is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Inline tube reducer ⌀86 mm to ⌀49 mm in STL 3D format. Length of this adapter is 125 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 40 mm. The ends are raw.

Tubing adapter ⌀87 mm to ⌀65 mm in STL 3D format. Length of this junction is 115 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 25 mm. The ends are rounded to facilitate the connection of the two tubes.

Inline sleeve ⌀87 mm to ⌀83 mm in STL 3D format. Total length of this connector is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.

Tube coupler ⌀88 mm to ⌀25 mm in STL format. Total length of this adapter is 63 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.