Inline tube adapter 3D Files - Side A outer diameter 5 to 100 mm | page 22

Straight tube adapter ⌀80 mm to ⌀70 mm in STL format. Total length of this fitting is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 4.9 mm. The ends are not rounded.

Straight tube fitting ⌀80 mm to ⌀75 mm in STL 3D format. Final length of this reducer is 115 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The two axes of the tubes are off-center by 2.4 mm. The ends are not rounded.

Tube adapter ⌀80 mm to ⌀75 mm in STL format. Length of this coupler is 111 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 46 mm, the smaller one of 45 mm. The ends feature an external fillet to make tube connection easier.

Diameter adapter ⌀80 mm to ⌀75 mm in STL 3D format. Final length of this connector is 111 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 46 mm, the smaller one of 45 mm. The two axes of the tubes are off-center by 2.4 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.

Straight tube adapter ⌀80 mm to ⌀75 mm in STL 3D format. Final length of this reducer is 101 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 46 mm, the smaller one of 45 mm. The axes of the tubes are off-center by 2.4 mm. The ends are rounded on the outside to facilitate the connection of the two tubes.

Inline tube coupler ⌀80 mm to ⌀75 mm in STL format. Total length of this adapter is 100 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 45 mm as well. The axes of the tubes are offset by 2.4 mm. The ends have a fillet on the outside to make tube connection easier.

Straight tube connector ⌀80 mm to ⌀70 mm in STL 3D format. Total length of this adapter is 65 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 25 mm. The ends are not rounded.

Inline tube reducer ⌀80 mm to ⌀50 mm in STL 3D format. Total length of this connector is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The two axes of the tubes are offset by 1 mm. The ends feature an internal fillet to make tube connection easier.

Tube reducer ⌀80 mm to ⌀50 mm in STL 3D format. Final length of this coupler is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Diameter adapter ⌀80 mm to ⌀30 mm in STL 3D format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Inline tube coupler ⌀80 mm to ⌀35 mm in STL format. Total length of this adapter is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 30 mm. The ends have a fillet to make tube connection easier.

Tube coupler ⌀80 mm to ⌀70 mm in STL 3D format. Length of this reducer is 40 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 25 mm. The ends are not rounded.

Tube connector ⌀80 mm to ⌀60 mm in STL 3D format. Final length of this connector is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.

Straight tube reducer ⌀80 mm to ⌀66 mm in STL format. Total length of this fitting is 120 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 40 mm. The smaller-diameter tube has a thickness of 20 mm and a length of 30 mm. The ends are raw.

Inline tube reducer ⌀80 mm to ⌀66 mm in STL 3D format. Final length of this sleeve is 120 mm. The larger-diameter tube has a thickness of 3 mm and a length of 40 mm. The smaller-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The ends have no fillet.

Tube junction ⌀80 mm to ⌀50 mm in STL format. Total length of this reducer is 250 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 200 mm, the smaller one of 30 mm. The ends are raw.

Tube coupler ⌀80 mm to ⌀55 mm in STL format. Length of this coupler is 140 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are offset by 12.4 mm. The ends have a fillet on the inside to ease the connection.

Straight tube connector ⌀80 mm to ⌀75 mm in STL 3D format. Total length of this adapter is 160 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 70 mm, the smaller one of 60 mm. The ends have no fillet.

Inline fitting ⌀80 mm to ⌀60 mm in STL 3D format. Total length of this connector is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 15 mm as well. The ends are not rounded.

Inline tube reducer ⌀80 mm to ⌀30 mm in STL 3D format. Length of this reducer is 63 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 20 mm. The ends are raw.

Inline sleeve ⌀80 mm to ⌀32 mm in STL format. Total length of this fitting is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 60 mm. The two axes of the tubes are offset by 10 mm. The ends feature an internal fillet to make tube connection easier.

Inline sleeve ⌀80 mm to ⌀46 mm in STL 3D format. Length of this fitting is 160 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 80 mm, the smaller one of 60 mm. The ends have no fillet.

Inline tube reducer ⌀80 mm to ⌀22 mm in STL 3D format. Length of this sleeve is 49 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 9 mm. The ends have no fillet.

Inline fitting ⌀80 mm to ⌀50 mm in STL format. Length of this coupler is 700 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 300 mm, the smaller one of 300 mm as well. The ends are raw.

Inline tube adapter ⌀80 mm to ⌀24 mm in STL 3D format. Final length of this coupler is 99 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 49 mm. The ends have no fillet.

Tube reducer ⌀80 mm to ⌀65 mm in STL format. Total length of this connector is 115 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 40 mm. The ends have a fillet to ease the connection.

Inline tube coupler ⌀80 mm to ⌀65 mm in STL format. Length of this sleeve is 255 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 150 mm, the smaller one of 100 mm. The ends have a fillet on the outside to ease the connection.

Tube connector ⌀80 mm to ⌀40 mm in STL format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Inline sleeve ⌀80 mm to ⌀70 mm in STL format. Length of this connector is 30 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The ends are not rounded.

Tubing adapter ⌀80 mm to ⌀70 mm in STL format. Final length of this sleeve is 30 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The axes of the tubes are off-center by 2 mm. The ends are raw.