Custom Tube adapter STL file ⌀ 70–68 mm (Length: 110 mm) 📦#4281

STL Download STL 2
Create a new model expert
from scratch search for a model
Inline tube adapter ⌀70 mm to ⌀68 mm in STL format. Total length of this adapter is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Generation date: 2025-12-04
3D Model Tube adapter STL file ⌀ 70–68 mm (Length: 110 mm)

3D model download

Free
  • inline-tube-adapter-lenA50mm-d_model4281-nb0_dd{id}.stl : 270.8 Ko
STL Mesh quality : Linear deflection 0.05 Angular deflection 0.05
No compliance warranty No compliance warranty
(attribution - commercial use allowed)
Safe download
Instant .zip download — no email, no account

Values for this model

This model was generated by the Inline tube adapter template, with the following values:
Parameter Value
#1 side A length 50 mm (≃1.97 in)
#2 side A outer diameter 70 mm (≃2 3/4 in)
#3 side A thickness 2 mm (≃0.08 in)
#4 side B length 50 mm (≃1.97 in)
#5 side B outer diameter 68 mm (≃2 11/16 in)
#6 side B thickness 2 mm (≃0.08 in)
#7 transition length 10 mm (≃0.39 in)
#8 axis offset 0 mm (0 in)
#9 ends fillet no fillet
Metadata Value
inner diameter (side A) 66 mm (≃2.60 in)
inner diameter (side B) 64 mm (≃2.52 in)
total length 110 mm (≃4.33 in)
illustration of the parameters
Parameter overview

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 side A length lenA
#2 side A outer diameter diA
#3 side A thickness thA
#4 side B length lenB
#5 side B outer diameter diB
#6 side B thickness thB
#7 transition length tra
#8 axis offset ofs
#9 ends fillet fil

Related 3D models

To search for a model based on your own parameters, go to the template page Inline tube adapter 

Tube adapter STL file ⌀ 80–75 mm (Length: 115 mm) (📦 #1213)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–75 mm (Length: 115 mm)
Straight tube fitting ⌀80 mm to ⌀75 mm in STL 3D format. Final length of this reducer is 115 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The two axes of the tubes are off-center by 2.4 mm. The ends are not rounded.
Parameter Value Unit
side A length 50 mm
side A outer diameter 80 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 75 mm
side B thickness 2 mm
transition length 15 mm
axis offset 2.4 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 80–60 mm (Length: 120 mm) (📦 #8278)

1 object(s) - format STL
Tubing adapter STL file ⌀ 80–60 mm (Length: 120 mm)
Straight tube fitting ⌀80 mm to ⌀60 mm in STL 3D format. Total length of this sleeve is 120 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 80 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 56–50 mm (Length: 120 mm) (📦 #1493)

1 object(s) - format STL (5.0/5) 1 vote(s)
Tube adapter STL 3D file ⌀ 56–50 mm (Length: 120 mm)
Inline fitting ⌀56 mm to ⌀50 mm in STL format. Length of this adapter is 120 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 56 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 77–57 mm (Length: 125 mm) (📦 #2313)

1 object(s) - format STL
Tube adapter STL file ⌀ 77–57 mm (Length: 125 mm)
Inline tube junction ⌀77 mm to ⌀57 mm in STL format. Length of this fitting is 125 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 77 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 57 mm
side B thickness 2 mm
transition length 25 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 73–68 mm (Length: 90 mm) (📦 #3374)

1 object(s) - format STL
Tubing adapter STL file ⌀ 73–68 mm (Length: 90 mm)
Tubing adapter ⌀73 mm to ⌀68 mm in STL format. Length of this coupler is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 50 mm. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 73 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 68 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 98–80 mm (Length: 90 mm) (📦 #3512)

1 object(s) - format STL
Tube adapter STL file ⌀ 98–80 mm (Length: 90 mm)
Tube adapter ⌀98 mm to ⌀80 mm in STL 3D format. Total length of this fitting is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 45 mm, the smaller one of 40 mm. The ends are not rounded.
Parameter Value Unit
side A length 45 mm
side A outer diameter 98 mm
side A thickness 2 mm
side B length 40 mm
side B outer diameter 80 mm
side B thickness 2 mm
transition length 5 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 99–80 mm (Length: 90 mm) (📦 #3534)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 99–80 mm (Length: 90 mm)
Straight tubing adapter ⌀99 mm to ⌀80 mm in STL format. Final length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 40 mm. The ends are raw.
Parameter Value Unit
side A length 45 mm
side A outer diameter 99 mm
side A thickness 2 mm
side B length 40 mm
side B outer diameter 80 mm
side B thickness 2 mm
transition length 5 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 70–62 mm (Length: 100 mm) (📦 #2254)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 70–62 mm (Length: 100 mm)
Straight tube adapter ⌀70 mm to ⌀62 mm in STL format. Length of this adapter is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 50 mm. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 70 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 62 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 63–43 mm (Length: 120 mm) (📦 #5796)

1 object(s) - format STL
Tubing adapter STL file ⌀ 63–43 mm (Length: 120 mm)
Inline tube junction ⌀63 mm to ⌀43 mm in STL 3D format. Length of this junction is 120 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are raw.
Parameter Value Unit
side A length 50 mm
side A outer diameter 63 mm
side A thickness 2.5 mm
side B length 50 mm
side B outer diameter 43 mm
side B thickness 2.5 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 64–42 mm (Length: 95 mm) (📦 #8094)

1 object(s) - format STL
Tubing adapter STL file ⌀ 64–42 mm (Length: 95 mm)
Straight tube connector ⌀64 mm to ⌀42 mm in STL 3D format. Total length of this junction is 95 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 35 mm, the smaller one of 50 mm. The ends are not rounded.
Parameter Value Unit
side A length 35 mm
side A outer diameter 64 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 42 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 44–40 mm (Length: 110 mm) (📦 #8091)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 44–40 mm (Length: 110 mm)
Tubing adapter ⌀44 mm to ⌀40 mm in STL format. Final length of this junction is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 44 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 40 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 85–65 mm (Length: 111 mm) (📦 #1690)

1 object(s) - format STL
Tube adapter STL file ⌀ 85–65 mm (Length: 111 mm)
Inline sleeve ⌀85 mm to ⌀65 mm in STL 3D format. Total length of this reducer is 111 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 45 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 45 mm
side A outer diameter 85 mm
side A thickness 3 mm
side B length 45 mm
side B outer diameter 65 mm
side B thickness 3 mm
transition length 21 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 74–67 mm (Length: 85 mm) (📦 #8728)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 74–67 mm (Length: 85 mm)
Diameter adapter ⌀74 mm to ⌀67 mm in STL 3D format. Total length of this junction is 85 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 35 mm. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 74 mm
side A thickness 2 mm
side B length 35 mm
side B outer diameter 67 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 75–67 mm (Length: 85 mm) (📦 #8732)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 75–67 mm (Length: 85 mm)
Inline sleeve ⌀75 mm to ⌀67 mm in STL format. Final length of this junction is 85 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 35 mm. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 75 mm
side A thickness 2 mm
side B length 35 mm
side B outer diameter 67 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 74–64 mm (Length: 85 mm) (📦 #8730)

1 object(s) - format STL
Tube adapter STL file ⌀ 74–64 mm (Length: 85 mm)
Tube connector ⌀74 mm to ⌀64 mm in STL 3D format. Total length of this connector is 85 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 35 mm. The ends have no fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 74 mm
side A thickness 2 mm
side B length 35 mm
side B outer diameter 64 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 85–59 mm (Length: 110 mm) (📦 #7817)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 85–59 mm (Length: 110 mm)
Tube adapter ⌀85 mm to ⌀59 mm in STL format. Length of this fitting is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 40 mm
side A outer diameter 85 mm
side A thickness 2 mm
side B length 40 mm
side B outer diameter 59 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 69–65 mm (Length: 100 mm) (📦 #1393)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 69–65 mm (Length: 100 mm)
Inline tube coupler ⌀69 mm to ⌀65 mm in STL format. Final length of this fitting is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 50 mm. The ends feature an external fillet to make tube connection easier.
Parameter Value Unit
side A length 40 mm
side A outer diameter 69 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 65 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 54–53 mm (Length: 85 mm) (📦 #4062)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 54–53 mm (Length: 85 mm)
Inline tube junction ⌀54 mm to ⌀53 mm in STL 3D format. Length of this sleeve is 85 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 54 mm, the smaller one of 26 mm. The ends are raw.
Parameter Value Unit
side A length 54 mm
side A outer diameter 54 mm
side A thickness 2 mm
side B length 26 mm
side B outer diameter 53 mm
side B thickness 2 mm
transition length 5 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 51–48 mm (Length: 110 mm) (📦 #8084)

1 object(s) - format STL
Tubing adapter STL file ⌀ 51–48 mm (Length: 110 mm)
Inline tubing adapter ⌀51 mm to ⌀48 mm in STL format. Length of this reducer is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 51 mm
side A thickness 3 mm
side B length 50 mm
side B outer diameter 48 mm
side B thickness 3 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 70–68 mm (Length: 70 mm) (📦 #4282)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 70–68 mm (Length: 70 mm)
Straight tube coupler ⌀70 mm to ⌀68 mm in STL format. Length of this reducer is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 70 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 68 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 50–45 mm (Length: 95 mm) (📦 #8082)

1 object(s) - format STL
Tubing adapter STL file ⌀ 50–45 mm (Length: 95 mm)
Inline tube junction ⌀50 mm to ⌀45 mm in STL 3D format. Final length of this connector is 95 mm. The larger-diameter tube has a thickness of 2 mm and a sleeve length of 35 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 50 mm. The ends are not rounded.
Parameter Value Unit
side A length 35 mm
side A outer diameter 50 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 45 mm
side B thickness 3 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 53–46 mm (Length: 100 mm) (📦 #8995)

1 object(s) - format STL
Tubing adapter STL file ⌀ 53–46 mm (Length: 100 mm)
Tube coupler ⌀53 mm to ⌀46 mm in STL 3D format. Length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 60 mm. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 53 mm
side A thickness 2 mm
side B length 60 mm
side B outer diameter 46 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 102–58 mm (Length: 105 mm) (📦 #8877)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 102–58 mm (Length: 105 mm)
Tube junction ⌀102 mm to ⌀58 mm in STL format. Length of this sleeve is 105 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 102 mm
side A thickness 3 mm
side B length 50 mm
side B outer diameter 58 mm
side B thickness 3 mm
transition length 5 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 46–44 mm (Length: 95 mm) (📦 #8119)

1 object(s) - format STL
Tubing adapter STL file ⌀ 46–44 mm (Length: 95 mm)
Straight sleeve ⌀46 mm to ⌀44 mm in STL format. Total length of this junction is 95 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 30 mm. The ends are raw.
Parameter Value Unit
side A length 50 mm
side A outer diameter 46 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 44 mm
side B thickness 2 mm
transition length 15 mm
axis offset 0 mm
ends fillet no fillet