Custom Tubing adapter STL 3D file ⌀ 200–110 mm (Length: 240 mm) 📦#9818

Inline tube adapter ⌀250 mm to ⌀120 mm in STL 3D format. Total length of this sleeve is 200 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 60 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 60 mm as well. The ends are rounded on the inside.

Straight tube reducer ⌀140 mm to ⌀106 mm in STL 3D format. Length of this reducer is 200 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 60 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 60 mm as well. The ends have a fillet on the inside to ease the connection.

Tubing reducer ⌀200 mm to ⌀110 mm in STL 3D format. Total length of this adapter is 210 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 50 mm. The ends feature an external fillet.

Straight tube adapter ⌀150 mm to ⌀142 mm in STL format. Length of this sleeve is 194 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 34 mm, the smaller one of 60 mm. The ends are rounded.

Straight tube reducer ⌀200 mm to ⌀150 mm in STL 3D format. Final length of this adapter is 200 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends are rounded to make tube connection easier.

Straight tube coupler ⌀148 mm to ⌀110 mm in STL format. Length of this junction is 200 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 60 mm. The ends have a fillet to facilitate the connection of the two tubes.

Inline sleeve ⌀167 mm to ⌀122 mm in STL format. Total length of this fitting is 160 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends feature a fillet to make tube connection easier.

Tube connector ⌀152 mm to ⌀99 mm in STL format. Total length of this connector is 159 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 55 mm. The ends feature an internal fillet.

Tubing adapter ⌀147 mm to ⌀107 mm in STL 3D format. Length of this junction is 150 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are rounded to ease the connection.

Diameter adapter ⌀180 mm to ⌀152 mm in STL format. Length of this connector is 159 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 55 mm. The ends are rounded on the inside to ease the connection.

Inline fitting ⌀170 mm to ⌀122 mm in STL format. Length of this junction is 150 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are rounded to facilitate the connection of the two tubes.

Inline sleeve ⌀110 mm to ⌀85 mm in STL format. Length of this reducer is 175 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 50 mm. The ends have a fillet to make tube connection easier.

Straight sleeve ⌀150 mm to ⌀110 mm in STL 3D format. Length of this adapter is 195 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 60 mm. The ends have a fillet on the outside.

Straight tube reducer ⌀120 mm to ⌀80 mm in STL 3D format. Length of this connector is 240 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are rounded on the inside.

Straight tube fitting ⌀152 mm to ⌀50 mm in STL format. Final length of this connector is 205 mm. The larger-diameter tube has a thickness of 5 mm and a length of 50 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 35 mm. The ends have a fillet to make tube connection easier.

Tube adapter ⌀183 mm to ⌀97 mm in STL 3D format. Final length of this junction is 117 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 17 mm. The ends are rounded on the inside to make tube connection easier.

Inline tubing adapter ⌀115 mm to ⌀90 mm in STL format. Final length of this fitting is 180 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 60 mm as well. The two axes of the tubes are offset by 12 mm. The ends have a fillet on the inside to facilitate the connection of the two tubes.

Inline tubing adapter ⌀115 mm to ⌀85 mm in STL 3D format. Total length of this adapter is 180 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The two axes of the tubes are off-center by 12 mm. The ends feature an internal fillet.

Tube reducer ⌀135 mm to ⌀120 mm in STL format. Length of this reducer is 210 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 70 mm, the smaller one of 70 mm as well. The ends feature an external fillet to ease the connection.

Tube adapter ⌀145 mm to ⌀80 mm in STL format. Final length of this fitting is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 30 mm. The ends have a fillet on the outside to make tube connection easier.

Tube reducer ⌀146 mm to ⌀109 mm in STL 3D format. Final length of this reducer is 220 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends are raw.

Diameter adapter ⌀114 mm to ⌀88 mm in STL 3D format. Final length of this junction is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends are rounded on the inside to ease the connection.

Tube adapter ⌀200 mm to ⌀145 mm in STL 3D format. Total length of this coupler is 120 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The axes of the tubes are off-center by 5 mm. The ends have a fillet to facilitate the connection of the two tubes.

Inline sleeve ⌀150 mm to ⌀125 mm in STL 3D format. Total length of this coupler is 127 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 48 mm. The ends feature a fillet.

Straight tubing adapter ⌀183 mm to ⌀97 mm in STL format. Final length of this connector is 300 mm. The thickness of the tubes is identical: 6 mm. The larger-diameter tube has a sleeve length of 100 mm, the smaller one of 100 mm as well. The ends have a fillet on the inside to make tube connection easier.

Straight sleeve ⌀110 mm to ⌀88 mm in STL format. Length of this adapter is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends feature an internal fillet to facilitate the connection of the two tubes.

Straight tube fitting ⌀80 mm to ⌀35 mm in STL 3D format. Total length of this coupler is 240 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 60 mm. The smaller-diameter tube has a thickness of 2.5 mm and a length of 80 mm. The ends are rounded to ease the connection.

Straight tube fitting ⌀180 mm to ⌀150 mm in STL 3D format. Final length of this junction is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 30 mm. The ends have a fillet on the inside.

Tube connector ⌀178 mm to ⌀146 mm in STL format. Final length of this fitting is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are rounded on the inside to make tube connection easier.