Custom Tubing adapter STL file ⌀ 149–148 mm (Length: 49 mm) 📦#9597
Generation date: 2026-06-23
3D model download
Free- inline-tube-adapter-lenA22mm-d_model9597-nb0_dd{id}.stl : 221.6 Ko
STL
Mesh quality :
0.05
0.05
No compliance warranty
License: CC BY - Creative commons
(attribution - commercial use allowed)
Safe download
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | side A length | 22 mm (≃7/8 in) |
| #2 | side A outer diameter | 149 mm (≃5 7/8 in) |
| #3 | side A thickness | 4 mm (≃0.16 in) |
| #4 | side B length | 22 mm (≃7/8 in) |
| #5 | side B outer diameter | 148 mm (≃5 13/16 in) |
| #6 | side B thickness | 4 mm (≃0.16 in) |
| #7 | transition length | 5 mm (≃3/16 in) |
| #8 | axis offset | 0 mm (0 in) |
| #9 | ends fillet | no fillet |
| Metadata | Value |
|---|---|
| inner diameter (side A) | 141 mm (≃5 9/16 in) |
| inner diameter (side B) | 140 mm (≃5 1/2 in) |
| total length | 49 mm (≃1 15/16 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 side A length | lenA |
| #2 side A outer diameter | diA |
| #3 side A thickness | thA |
| #4 side B length | lenB |
| #5 side B outer diameter | diB |
| #6 side B thickness | thB |
| #7 transition length | tra |
| #8 axis offset | ofs |
| #9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tube adapter STL 3D file ⌀ 149–148 mm (Length: 45 mm) (📦 #9583)
1 object(s) - format STL
Tube coupler ⌀149 mm to ⌀148 mm in STL format. Length of this sleeve is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 149 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 148 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 158–157 mm (Length: 45 mm) (📦 #8482)
1 object(s) - format STL
Straight tube fitting ⌀158 mm to ⌀157 mm in STL 3D format. Final length of this adapter is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 158 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 157 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 154–137 mm (Length: 60 mm) (📦 #9642)
1 object(s) - format STL
Inline tube adapter ⌀154 mm to ⌀137 mm in STL format. Length of this reducer is 60 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 154 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 137 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 140–120 mm (Length: 60 mm) (📦 #1207)
1 object(s) - format STL
Tube fitting ⌀140 mm to ⌀120 mm in STL 3D format. Final length of this sleeve is 60 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 140 | mm |
| side A thickness | 4 | mm |
| side B length | 20 | mm |
| side B outer diameter | 120 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 162–155 mm (Length: 65 mm) (📦 #8737)
1 object(s) - format STL
Inline tube coupler ⌀162 mm to ⌀155 mm in STL format. Final length of this adapter is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 162 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 155 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 159–156 mm (Length: 50 mm) (📦 #8478)
1 object(s) - format STL
Straight tube connector ⌀159 mm to ⌀156 mm in STL 3D format. Total length of this junction is 50 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 15 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 159 | mm |
| side A thickness | 3 | mm |
| side B length | 15 | mm |
| side B outer diameter | 156 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 141–131 mm (Length: 45 mm) (📦 #8590)
1 object(s) - format STL
Straight tube connector ⌀141 mm to ⌀131 mm in STL format. Final length of this sleeve is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 20 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 15 | mm |
| side A outer diameter | 141 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 131 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 168–155 mm (Length: 65 mm) (📦 #8750)
1 object(s) - format STL
Straight tube adapter ⌀168 mm to ⌀155 mm in STL format. Total length of this connector is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 168 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 155 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 164–154 mm (Length: 34 mm) (📦 #7906)
1 object(s) - format STL
Tube adapter ⌀164 mm to ⌀154 mm in STL format. Length of this coupler is 34 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 12 mm, the smaller one of 12 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 12 | mm |
| side A outer diameter | 164 | mm |
| side A thickness | 3 | mm |
| side B length | 12 | mm |
| side B outer diameter | 154 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 154–137 mm (Length: 75 mm) (📦 #9643)
1 object(s) - format STL
Straight tube coupler ⌀154 mm to ⌀137 mm in STL format. Length of this reducer is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 25 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 154 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 137 | mm |
| side B thickness | 3 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 147–138 mm (Length: 75 mm) (📦 #3044)
1 object(s) - format STL
Tube fitting ⌀147 mm to ⌀138 mm in STL format. Final length of this adapter is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 147 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 138 | mm |
| side B thickness | 3 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 147–134 mm (Length: 75 mm) (📦 #3029)
1 object(s) - format STL
Inline sleeve ⌀147 mm to ⌀134 mm in STL format. Length of this coupler is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 147 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 134 | mm |
| side B thickness | 3 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 158–118 mm (Length: 65 mm) (📦 #2289)
1 object(s) - format STL
Tube adapter ⌀158 mm to ⌀118 mm in STL format. Final length of this fitting is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 158 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 118 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 157–117 mm (Length: 65 mm) (📦 #2290)
1 object(s) - format STL
Tube connector ⌀157 mm to ⌀117 mm in STL 3D format. Total length of this fitting is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 157 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 117 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL file ⌀ 150–131 mm (Length: 75 mm) (📦 #3019)
1 object(s) - format STL
Inline tube coupler ⌀150 mm to ⌀131 mm in STL 3D format. Length of this junction is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 131 | mm |
| side B thickness | 3 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 144–125 mm (Length: 85 mm) (📦 #9733)
1 object(s) - format STL
Straight tube connector ⌀144 mm to ⌀125 mm in STL format. Final length of this junction is 85 mm. The larger-diameter tube has a thickness of 5 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 144 | mm |
| side A thickness | 5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 125 | mm |
| side B thickness | 4 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 140–115 mm (Length: 58 mm) (📦 #8592)
1 object(s) - format STL
Straight tube connector ⌀140 mm to ⌀115 mm in STL 3D format. Final length of this adapter is 58 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 19 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 140 | mm |
| side A thickness | 5 | mm |
| side B length | 19 | mm |
| side B outer diameter | 115 | mm |
| side B thickness | 5 | mm |
| transition length | 19 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 160–110 mm (Length: 65 mm) (📦 #2288)
1 object(s) - format STL
Tube adapter ⌀160 mm to ⌀110 mm in STL 3D format. Total length of this fitting is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 160 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 110 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 170–154 mm (Length: 70 mm) (📦 #2670)
1 object(s) - format STL
Tube reducer ⌀170 mm to ⌀154 mm in STL format. Length of this connector is 70 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 170 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 154 | mm |
| side B thickness | 2.5 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 123–110 mm (Length: 55 mm) (📦 #8993)
1 object(s) - format STL
Straight tubing adapter ⌀123 mm to ⌀110 mm in STL 3D format. Final length of this adapter is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 123 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 110 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 121–110 mm (Length: 55 mm) (📦 #8991)
1 object(s) - format STL
Straight tube adapter ⌀121 mm to ⌀110 mm in STL format. Length of this fitting is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 121 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 110 | mm |
| side B thickness | 3 | mm |
| transition length | 15 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 148–135 mm (Length: 90 mm) (📦 #2891)
1 object(s) - format STL
Tubing reducer ⌀148 mm to ⌀135 mm in STL format. Total length of this connector is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 50 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 148 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 135 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 135–115 mm (Length: 75 mm) (📦 #9630)
1 object(s) - format STL
Inline fitting ⌀135 mm to ⌀115 mm in STL 3D format. Length of this connector is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 135 | mm |
| side A thickness | 3 | mm |
| side B length | 25 | mm |
| side B outer diameter | 115 | mm |
| side B thickness | 3 | mm |
| transition length | 25 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 109–97 mm (Length: 55 mm) (📦 #4523)
1 object(s) - format STL
Tubing reducer ⌀109 mm to ⌀97 mm in STL format. Final length of this reducer is 55 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 109 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 97 | mm |
| side B thickness | 4 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 103–101 mm (Length: 61 mm) (📦 #9321)
1 object(s) - format STL
Diameter adapter ⌀103 mm to ⌀101 mm in STL format. Total length of this sleeve is 61 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 26 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 103 | mm |
| side A thickness | 4 | mm |
| side B length | 26 | mm |
| side B outer diameter | 101 | mm |
| side B thickness | 4 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tubing adapter STL 3D file ⌀ 165–154 mm (Length: 78 mm) (📦 #2662)
1 object(s) - format STL
Diameter adapter ⌀165 mm to ⌀154 mm in STL 3D format. Final length of this reducer is 78 mm. The thickness of the tubes is identical: 2.4 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 30 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 165 | mm |
| side A thickness | 2.4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 154 | mm |
| side B thickness | 2.4 | mm |
| transition length | 8 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |
Tube adapter STL file ⌀ 158–118 mm (Length: 90 mm) (📦 #2318)
1 object(s) - format STL
Inline fitting ⌀158 mm to ⌀118 mm in STL format. Final length of this connector is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 158 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 118 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | no fillet |