Custom Tube adapter STL file ⌀ 80–77 mm (Length: 150 mm) 📦#6566

STL Download STL 2
Create a new model expert
from scratch search for a model
Inline sleeve ⌀80 mm to ⌀77 mm in STL format. Total length of this fitting is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 90 mm. The ends are not rounded.
Generation date: 2026-01-14
3D Model Tube adapter STL file ⌀ 80–77 mm (Length: 150 mm)

3D model download

Free
  • inline-tube-adapter-lenA50mm-d_model6566-nb0_dd{id}.stl : 667.7 Ko
STL Mesh quality : Linear deflection 0.05 Angular deflection 0.05
No compliance warranty No compliance warranty
(attribution - commercial use allowed)
Safe download
Instant .zip download — no email, no account

Values for this model

This model was generated by the Inline tube adapter template, with the following values:
Parameter Value
#1 side A length 50 mm (≃1.97 in)
#2 side A outer diameter 80 mm (≃3.15 in)
#3 side A thickness 2 mm (≃0.08 in)
#4 side B length 90 mm (≃3.54 in)
#5 side B outer diameter 77 mm (≃3.03 in)
#6 side B thickness 2 mm (≃0.08 in)
#7 transition length 10 mm (≃0.39 in)
#8 axis offset 0 mm (0 in)
#9 ends fillet no fillet
Metadata Value
inner diameter (side A) 76 mm (≃3 in)
inner diameter (side B) 73 mm (≃2 7/8 in)
total length 150 mm (≃5.91 in)
illustration of the parameters
Parameter overview

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 side A length lenA
#2 side A outer diameter diA
#3 side A thickness thA
#4 side B length lenB
#5 side B outer diameter diB
#6 side B thickness thB
#7 transition length tra
#8 axis offset ofs
#9 ends fillet fil

Related 3D models

To search for a model based on your own parameters, go to the template page Inline tube adapter 

Tubing adapter STL file ⌀ 84–81 mm (Length: 150 mm) (📦 #6589)

1 object(s) - format STL
Tubing adapter STL file ⌀ 84–81 mm (Length: 150 mm)
Inline tubing adapter ⌀84 mm to ⌀81 mm in STL 3D format. Total length of this connector is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 90 mm. The ends are not rounded.
Parameter Value Unit
side A length 50 mm
side A outer diameter 84 mm
side A thickness 2 mm
side B length 90 mm
side B outer diameter 81 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 120–80 mm (Length: 147 mm) (📦 #9798)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 120–80 mm (Length: 147 mm)
Straight tubing adapter ⌀120 mm to ⌀80 mm in STL format. Total length of this adapter is 147 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 70 mm, the smaller one of 70 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 70 mm
side A outer diameter 120 mm
side A thickness 2 mm
side B length 70 mm
side B outer diameter 80 mm
side B thickness 2 mm
transition length 7 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 110–100 mm (Length: 125 mm) (📦 #1803)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 110–100 mm (Length: 125 mm)
Straight tube connector ⌀110 mm to ⌀100 mm in STL format. Total length of this coupler is 125 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 70 mm. The ends are not rounded.
Parameter Value Unit
side A length 50 mm
side A outer diameter 110 mm
side A thickness 3 mm
side B length 70 mm
side B outer diameter 100 mm
side B thickness 3 mm
transition length 5 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 102–98 mm (Length: 140 mm) (📦 #7049)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 102–98 mm (Length: 140 mm)
Inline tubing adapter ⌀102 mm to ⌀98 mm in STL format. Length of this coupler is 140 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 60 mm
side A outer diameter 102 mm
side A thickness 2 mm
side B length 60 mm
side B outer diameter 98 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 92–84 mm (Length: 164 mm) (📦 #6690)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 92–84 mm (Length: 164 mm)
Straight tube coupler ⌀92 mm to ⌀84 mm in STL 3D format. Length of this fitting is 164 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 76 mm, the smaller one of 76 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 76 mm
side A outer diameter 92 mm
side A thickness 3 mm
side B length 76 mm
side B outer diameter 84 mm
side B thickness 3 mm
transition length 12 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 103–99 mm (Length: 140 mm) (📦 #7048)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 103–99 mm (Length: 140 mm)
Straight tube adapter ⌀103 mm to ⌀99 mm in STL format. Total length of this sleeve is 140 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 60 mm
side A outer diameter 103 mm
side A thickness 2 mm
side B length 60 mm
side B outer diameter 99 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 70–68 mm (Length: 110 mm) (📦 #4281)

1 object(s) - format STL
Tube adapter STL file ⌀ 70–68 mm (Length: 110 mm)
Inline tube adapter ⌀70 mm to ⌀68 mm in STL format. Total length of this adapter is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 70 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 68 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 80–75 mm (Length: 115 mm) (📦 #1213)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–75 mm (Length: 115 mm)
Straight tube fitting ⌀80 mm to ⌀75 mm in STL 3D format. Final length of this reducer is 115 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The two axes of the tubes are off-center by 2.4 mm. The ends are not rounded.
Parameter Value Unit
side A length 50 mm
side A outer diameter 80 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 75 mm
side B thickness 2 mm
transition length 15 mm
axis offset 2.4 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 88–80 mm (Length: 120 mm) (📦 #8969)

1 object(s) - format STL
Tubing adapter STL file ⌀ 88–80 mm (Length: 120 mm)
Inline fitting ⌀88 mm to ⌀80 mm in STL format. Final length of this reducer is 120 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 60 mm. The ends have no fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 88 mm
side A thickness 2 mm
side B length 60 mm
side B outer diameter 80 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 80–60 mm (Length: 120 mm) (📦 #8278)

1 object(s) - format STL
Tubing adapter STL file ⌀ 80–60 mm (Length: 120 mm)
Straight tube fitting ⌀80 mm to ⌀60 mm in STL 3D format. Total length of this sleeve is 120 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 80 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 116–115 mm (Length: 145 mm) (📦 #6439)

1 object(s) - format STL
Tube adapter STL file ⌀ 116–115 mm (Length: 145 mm)
Diameter adapter ⌀116 mm to ⌀115 mm in STL format. Length of this sleeve is 145 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 70 mm, the smaller one of 70 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 70 mm
side A outer diameter 116 mm
side A thickness 2 mm
side B length 70 mm
side B outer diameter 115 mm
side B thickness 2 mm
transition length 5 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 102–99 mm (Length: 140 mm) (📦 #7046)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 102–99 mm (Length: 140 mm)
Tube adapter ⌀102 mm to ⌀99 mm in STL 3D format. Final length of this sleeve is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 60 mm
side A outer diameter 102 mm
side A thickness 3 mm
side B length 60 mm
side B outer diameter 99 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 104–98 mm (Length: 140 mm) (📦 #7050)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 104–98 mm (Length: 140 mm)
Tube reducer ⌀104 mm to ⌀98 mm in STL 3D format. Final length of this sleeve is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends are raw.
Parameter Value Unit
side A length 60 mm
side A outer diameter 104 mm
side A thickness 3 mm
side B length 60 mm
side B outer diameter 98 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 53–46 mm (Length: 100 mm) (📦 #8995)

1 object(s) - format STL
Tubing adapter STL file ⌀ 53–46 mm (Length: 100 mm)
Tube coupler ⌀53 mm to ⌀46 mm in STL 3D format. Length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 60 mm. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 53 mm
side A thickness 2 mm
side B length 60 mm
side B outer diameter 46 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 105–98 mm (Length: 140 mm) (📦 #7090)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 105–98 mm (Length: 140 mm)
Inline fitting ⌀105 mm to ⌀98 mm in STL format. Length of this reducer is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends are raw.
Parameter Value Unit
side A length 60 mm
side A outer diameter 105 mm
side A thickness 3 mm
side B length 60 mm
side B outer diameter 98 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 105–99 mm (Length: 140 mm) (📦 #7047)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 105–99 mm (Length: 140 mm)
Straight tubing adapter ⌀105 mm to ⌀99 mm in STL 3D format. Total length of this fitting is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 60 mm
side A outer diameter 105 mm
side A thickness 3 mm
side B length 60 mm
side B outer diameter 99 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 77–57 mm (Length: 125 mm) (📦 #2313)

1 object(s) - format STL
Tube adapter STL file ⌀ 77–57 mm (Length: 125 mm)
Inline tube junction ⌀77 mm to ⌀57 mm in STL format. Length of this fitting is 125 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 77 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 57 mm
side B thickness 2 mm
transition length 25 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 73–68 mm (Length: 90 mm) (📦 #3374)

1 object(s) - format STL
Tubing adapter STL file ⌀ 73–68 mm (Length: 90 mm)
Tubing adapter ⌀73 mm to ⌀68 mm in STL format. Length of this coupler is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 50 mm. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 73 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 68 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 56–50 mm (Length: 120 mm) (📦 #1493)

1 object(s) - format STL (5.0/5) 1 vote(s)
Tube adapter STL 3D file ⌀ 56–50 mm (Length: 120 mm)
Inline fitting ⌀56 mm to ⌀50 mm in STL format. Length of this adapter is 120 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 56 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 70–62 mm (Length: 100 mm) (📦 #2254)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 70–62 mm (Length: 100 mm)
Straight tube adapter ⌀70 mm to ⌀62 mm in STL format. Length of this adapter is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 50 mm. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 70 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 62 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 93–88 mm (Length: 105 mm) (📦 #7356)

1 object(s) - format STL
Tube adapter STL file ⌀ 93–88 mm (Length: 105 mm)
Straight tube connector ⌀93 mm to ⌀88 mm in STL 3D format. Length of this reducer is 105 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 60 mm. The ends are raw.
Parameter Value Unit
side A length 25 mm
side A outer diameter 93 mm
side A thickness 3 mm
side B length 60 mm
side B outer diameter 88 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–75 mm (Length: 160 mm) (📦 #3132)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–75 mm (Length: 160 mm)
Straight tube connector ⌀80 mm to ⌀75 mm in STL 3D format. Total length of this adapter is 160 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 70 mm, the smaller one of 60 mm. The ends have no fillet.
Parameter Value Unit
side A length 70 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 60 mm
side B outer diameter 75 mm
side B thickness 3 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 86–75 mm (Length: 160 mm) (📦 #3133)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 86–75 mm (Length: 160 mm)
Straight tubing adapter ⌀86 mm to ⌀75 mm in STL format. Final length of this junction is 160 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 70 mm, the smaller one of 60 mm. The ends have no fillet.
Parameter Value Unit
side A length 70 mm
side A outer diameter 86 mm
side A thickness 3 mm
side B length 60 mm
side B outer diameter 75 mm
side B thickness 3 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 44–38 mm (Length: 180 mm) (📦 #6685)

1 object(s) - format STL
Tubing adapter STL file ⌀ 44–38 mm (Length: 180 mm)
Tube coupler ⌀44 mm to ⌀38 mm in STL 3D format. Length of this coupler is 180 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 120 mm. The two axes of the tubes are off-center by 2.9 mm. The ends are raw.
Parameter Value Unit
side A length 40 mm
side A outer diameter 44 mm
side A thickness 2 mm
side B length 120 mm
side B outer diameter 38 mm
side B thickness 2 mm
transition length 20 mm
axis offset 2.9 mm
ends fillet no fillet

Tubing adapter STL 3D file ⌀ 102–58 mm (Length: 105 mm) (📦 #8877)

1 object(s) - format STL
Tubing adapter STL 3D file ⌀ 102–58 mm (Length: 105 mm)
Tube junction ⌀102 mm to ⌀58 mm in STL format. Length of this sleeve is 105 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 50 mm
side A outer diameter 102 mm
side A thickness 3 mm
side B length 50 mm
side B outer diameter 58 mm
side B thickness 3 mm
transition length 5 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 111–56 mm (Length: 160 mm) (📦 #7462)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 111–56 mm (Length: 160 mm)
Straight tubing adapter ⌀111 mm to ⌀56 mm in STL format. Total length of this coupler is 160 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 70 mm. The ends are raw.
Parameter Value Unit
side A length 50 mm
side A outer diameter 111 mm
side A thickness 3 mm
side B length 70 mm
side B outer diameter 56 mm
side B thickness 3 mm
transition length 40 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 69–65 mm (Length: 100 mm) (📦 #1393)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 69–65 mm (Length: 100 mm)
Inline tube coupler ⌀69 mm to ⌀65 mm in STL format. Final length of this fitting is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 50 mm. The ends feature an external fillet to make tube connection easier.
Parameter Value Unit
side A length 40 mm
side A outer diameter 69 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 65 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet fillet on th...

Tubing adapter STL file ⌀ 60–30 mm (Length: 140 mm) (📦 #4786)

1 object(s) - format STL
Tubing adapter STL file ⌀ 60–30 mm (Length: 140 mm)
Tube reducer ⌀60 mm to ⌀30 mm in STL 3D format. Total length of this coupler is 140 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 60 mm
side A outer diameter 60 mm
side A thickness 2.5 mm
side B length 60 mm
side B outer diameter 30 mm
side B thickness 2.5 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tubing adapter STL file ⌀ 63–43 mm (Length: 120 mm) (📦 #5796)

1 object(s) - format STL
Tubing adapter STL file ⌀ 63–43 mm (Length: 120 mm)
Inline tube junction ⌀63 mm to ⌀43 mm in STL 3D format. Length of this junction is 120 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are raw.
Parameter Value Unit
side A length 50 mm
side A outer diameter 63 mm
side A thickness 2.5 mm
side B length 50 mm
side B outer diameter 43 mm
side B thickness 2.5 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet