Custom Washer / Flat Gasket STL file ⌀ID: 177.5 mm ⌀OD: 180 mm thickness: 3 mm + chamfers 📦#6324
Generation date: 2026-01-09
3D model download
Free- washer-flat-gasket-ring-inD177_model6324-nb0_dd{id}.stl : 197 Ko
STL
Mesh quality :
0.0005
0.05
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the Washer, Flat gasket, Ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter | 177.5 mm (≃7 in) |
| #2 | outer diameter | 180 mm (≃7.09 in) |
| #3 | thickness | 3 mm (≃1/8 in) |
| #4 | finish | chamfer |
| #5 | finish position | inner + outer |
| #6 | sides | two sides |
| #7 | finish value | 0.2 mm (≃0 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter | inD |
| #2 outer diameter | ouD |
| #3 thickness | thi |
| #4 finish | edgF |
| #5 finish position | edgP |
| #6 sides | sidC |
| #7 finish value | finV |
Related 3D models
To search for a model based on your own parameters, go to the template page Washer, Flat gasket, Ring
Washer / Flat Gasket STL 3D file ⌀ID: 100 mm ⌀OD: 105 mm thickness: 3 mm + chamfers (📦 #8844)
1 object(s) - format STL
3D file of flat gasket / washer in STL file format. This part has an inner diameter of ⌀100 mm and an outer diameter of ⌀105 mm. The thickness is 3 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 0.3 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 100 | mm |
| outer diameter | 105 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.3 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 190 mm ⌀OD: 220 mm thickness: 14 mm + chamfers (📦 #9658)
1 object(s) - format STL
Download this file of washer / gasket in STL format. This model has an inner diameter of ⌀190 mm and an outer diameter of ⌀220 mm. The part thickness is 14 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 0.2 mm. These finishes are present on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 190 | mm |
| outer diameter | 220 | mm |
| thickness | 14 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.2 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 250 mm ⌀OD: 280 mm thickness: 6 mm + chamfers (📦 #1798)
1 object(s) - format STL
3D model of flat gasket / washer in STL format. This model has an inner diameter of ⌀250 mm and an outer diameter of ⌀280 mm. The part thickness is 6 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 250 | mm |
| outer diameter | 280 | mm |
| thickness | 6 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1 | mm |
Washer / Flat Gasket STL file ⌀ID: 100 mm ⌀OD: 150 mm thickness: 12 mm + fillets (📦 #7368)
1 object(s) - format STL
Download this 3D file of washer / flat gasket in STL 3D file format. This model features an internal diameter of ⌀100 mm and an external diameter of ⌀150 mm. The part thickness is 12 mm. Fillets are present on both the internal diameter and the external diameter, each with a value of 0.1 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 100 | mm |
| outer diameter | 150 | mm |
| thickness | 12 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL file ⌀ID: 65.5 mm ⌀OD: 70.5 mm thickness: 6 mm + chamfers (📦 #8953)
1 object(s) - format STL
Download this model of washer / flat gasket in STL file format. This model has an inner diameter of ⌀65.5 mm and an outer diameter of ⌀70.5 mm. The part thickness is 6 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 1 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 65.5 | mm |
| outer diameter | 70.5 | mm |
| thickness | 6 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfers (📦 #1817)
1 object(s) - format STL
3D model of gasket / washer in STL 3D file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The part thickness is 5 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 1 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 148.7 mm ⌀OD: 150 mm thickness: 5 mm + chamfer (📦 #6655)
1 object(s) - format STL
Download this file of washer / gasket in STL file format. This model features an internal diameter of ⌀148.7 mm and an external diameter of ⌀150 mm. The total thickness is 5 mm. A chamfer is present on the external diameter with a value of 0.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 148.7 | mm |
| outer diameter | 150 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 190 mm ⌀OD: 254 mm thickness: 2 mm + fillets (📦 #10099)
1 object(s) - format STL
3D file of washer / gasket in STL 3D file format. This part features an internal diameter of ⌀190 mm and an external diameter of ⌀254 mm. The thickness is 2 mm. Fillets are present on the internal diameter, each with a value of 0.9 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 190 | mm |
| outer diameter | 254 | mm |
| thickness | 2 | mm |
| finish | fillet | |
| finish position | inner | |
| sides | two sides | |
| finish value | 0.9 | mm |
Washer / Flat Gasket STL file ⌀ID: 165 mm ⌀OD: 200 mm thickness: 1 mm + fillet (📦 #9668)
1 object(s) - format STL
Download this model of washer / flat gasket in STL format. This part features an inner diameter of ⌀165 mm and an outer diameter of ⌀200 mm. The part thickness is 1 mm. A fillet is present on the outer diameter with a value of 0.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 165 | mm |
| outer diameter | 200 | mm |
| thickness | 1 | mm |
| finish | fillet | |
| finish position | outer | |
| sides | one side | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 120.1 mm ⌀OD: 125 mm thickness: 2 mm + chamfer (📦 #6972)
1 object(s) - format STL
File of washer / flat gasket in STL format. This model has an inner diameter of ⌀120.1 mm and an outer diameter of ⌀125 mm. The thickness is 2 mm. A chamfer is applied on the outer diameter with a value of 1.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 120.1 | mm |
| outer diameter | 125 | mm |
| thickness | 2 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 1.4 | mm |
Washer / Flat Gasket STL file ⌀ID: 120 mm ⌀OD: 130 mm thickness: 2 mm + chamfer (📦 #6974)
1 object(s) - format STL
3D model of washer / gasket in STL file format. This model has an internal diameter of ⌀120 mm and an external diameter of ⌀130 mm. The thickness is 2 mm. A chamfer is present on the external diameter with a value of 1.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 120 | mm |
| outer diameter | 130 | mm |
| thickness | 2 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 1.9 | mm |
Washer / Flat Gasket STL file ⌀ID: 120 mm ⌀OD: 125 mm thickness: 2 mm + chamfer (📦 #6973)
1 object(s) - format STL
Download this 3D model of washer / flat gasket in STL file format. This part has an inner diameter of ⌀120 mm and an outer diameter of ⌀125 mm. The thickness is 2 mm. A chamfer is present on the outer diameter with a value of 1.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 120 | mm |
| outer diameter | 125 | mm |
| thickness | 2 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 1.9 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 10 mm ⌀OD: 100 mm thickness: 2 mm + chamfers (📦 #3854)
1 object(s) - format STL
3D model of washer / gasket in STL format. This model has an internal diameter of ⌀10 mm and an external diameter of ⌀100 mm. The total thickness is 2 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 0.1 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 10 | mm |
| outer diameter | 100 | mm |
| thickness | 2 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 89 mm ⌀OD: 118 mm thickness: 3 mm + chamfer (📦 #1855)
1 object(s) - format STL
3D model of gasket / washer in STL 3D file format. This part features an inner diameter of ⌀89 mm and an outer diameter of ⌀118 mm. The part thickness is 3 mm. A chamfer is present on the outer diameter with a value of 0.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 89 | mm |
| outer diameter | 118 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL file ⌀ID: 15 mm ⌀OD: 75 mm thickness: 4 mm + chamfers (📦 #3900)
1 object(s) - format STL
Model of gasket / washer in STL 3D file format. This model features an inner diameter of ⌀15 mm and an outer diameter of ⌀75 mm. The part thickness is 4 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 0.1 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 15 | mm |
| outer diameter | 75 | mm |
| thickness | 4 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL file ⌀ID: 34 mm ⌀OD: 37 mm thickness: 3 mm + chamfers (📦 #6363)
1 object(s) - format STL
Model of flat gasket / washer in STL file format. This model has an internal diameter of ⌀34 mm and an external diameter of ⌀37 mm. The thickness is 3 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.5 mm. These finishes are applied on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 34 | mm |
| outer diameter | 37 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 120 mm ⌀OD: 160 mm thickness: 3 mm + chamfer (📦 #7007)
1 object(s) - format STL
Download this 3D model of flat gasket / washer in STL file format. This part features an internal diameter of ⌀120 mm and an external diameter of ⌀160 mm. The part thickness is 3 mm. A chamfer is applied on the external diameter with a value of 2.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 120 | mm |
| outer diameter | 160 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 2.9 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 31.5 mm ⌀OD: 37 mm thickness: 2 mm + chamfers (📦 #6361)
1 object(s) - format STL
3D file of gasket / washer in STL file format. This model has an internal diameter of ⌀31.5 mm and an external diameter of ⌀37 mm. The thickness is 2 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.5 mm. These finishes are applied on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 31.5 | mm |
| outer diameter | 37 | mm |
| thickness | 2 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 114 mm ⌀OD: 160 mm thickness: 3 mm + chamfer (📦 #7008)
1 object(s) - format STL
Download this file of flat gasket / washer in STL file format. This model features an internal diameter of ⌀114 mm and an external diameter of ⌀160 mm. The thickness is 3 mm. A chamfer is applied on the external diameter with a value of 2.9 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 114 | mm |
| outer diameter | 160 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 2.9 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 120.1 mm ⌀OD: 146 mm thickness: 3.1 mm + chamfer (📦 #6970)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL file format. This part has an internal diameter of ⌀120.1 mm and an external diameter of ⌀146 mm. The thickness is 3.1 mm. A chamfer is present on the external diameter with a value of 3 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 120.1 | mm |
| outer diameter | 146 | mm |
| thickness | 3.1 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 3 | mm |