Custom Washer / Flat Gasket STL 3D file ⌀ID: 10 mm ⌀OD: 100 mm thickness: 2 mm + chamfers 📦#3854
Generation date: 2025-11-27
3D model download
Free- washer-flat-gasket-ring-inD10m_model3854-nb0_dd{id}.stl : 197 Ko
STL
Mesh quality :
0.0005
0.05
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the Washer, Flat gasket, Ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter | 10 mm (≃0.39 in) |
| #2 | outer diameter | 100 mm (≃3 15/16 in) |
| #3 | thickness | 2 mm (≃0.08 in) |
| #4 | finish | chamfer |
| #5 | finish position | inner + outer |
| #6 | sides | two sides |
| #7 | finish value | 0.1 mm (<0.01 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter | inD |
| #2 outer diameter | ouD |
| #3 thickness | thi |
| #4 finish | edgF |
| #5 finish position | edgP |
| #6 sides | sidC |
| #7 finish value | finV |
Related 3D models
To search for a model based on your own parameters, go to the template page Washer, Flat gasket, Ring
Washer / Flat Gasket STL file ⌀ID: 15 mm ⌀OD: 75 mm thickness: 4 mm + chamfers (📦 #3900)
1 object(s) - format STL
Model of gasket / washer in STL 3D file format. This model features an inner diameter of ⌀15 mm and an outer diameter of ⌀75 mm. The part thickness is 4 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 0.1 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 15 | mm |
| outer diameter | 75 | mm |
| thickness | 4 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 27 mm ⌀OD: 37 mm thickness: 1 mm + chamfers (📦 #3268)
1 object(s) - format STL (5.0/5) 1 vote(s)
Download this file of washer / flat gasket in STL format. This model has an inner diameter of ⌀27 mm and an outer diameter of ⌀37 mm. The total thickness is 1 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 0.4 mm. These finishes are applied on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 27 | mm |
| outer diameter | 37 | mm |
| thickness | 1 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 31.5 mm ⌀OD: 37 mm thickness: 2 mm + chamfers (📦 #6361)
1 object(s) - format STL
3D file of gasket / washer in STL file format. This model has an internal diameter of ⌀31.5 mm and an external diameter of ⌀37 mm. The thickness is 2 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.5 mm. These finishes are applied on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 31.5 | mm |
| outer diameter | 37 | mm |
| thickness | 2 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 34 mm ⌀OD: 37 mm thickness: 3 mm + chamfers (📦 #6363)
1 object(s) - format STL
Model of flat gasket / washer in STL file format. This model has an internal diameter of ⌀34 mm and an external diameter of ⌀37 mm. The thickness is 3 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.5 mm. These finishes are applied on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 34 | mm |
| outer diameter | 37 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 19 mm ⌀OD: 23 mm thickness: 3 mm + chamfers (📦 #8616)
1 object(s) - format STL
Download this model of gasket / washer in STL file format. This model has an inner diameter of ⌀19 mm and an outer diameter of ⌀23 mm. The thickness is 3 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 0.1 mm. These finishes are applied on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 19 | mm |
| outer diameter | 23 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 22 mm ⌀OD: 25 mm thickness: 3 mm + chamfers (📦 #1881)
1 object(s) - format STL
Download this file of washer / gasket in STL format. This part has an internal diameter of ⌀22 mm and an external diameter of ⌀25 mm. The thickness is 3 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.5 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 22 | mm |
| outer diameter | 25 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 16 mm ⌀OD: 24 mm thickness: 3 mm + chamfers (📦 #1695)
1 object(s) - format STL
Model of washer / flat gasket in STL format. This part has an inner diameter of ⌀16 mm and an outer diameter of ⌀24 mm. The total thickness is 3 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 0.5 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16 | mm |
| outer diameter | 24 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfers (📦 #1817)
1 object(s) - format STL
3D model of gasket / washer in STL 3D file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The part thickness is 5 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 1 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 71 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1 | mm |
Washer / Flat Gasket STL file ⌀ID: 10 mm ⌀OD: 16 mm thickness: 3 mm + chamfers (📦 #4003)
1 object(s) - format STL
Download this model of gasket / washer in STL file format. This model features an inner diameter of ⌀10 mm and an outer diameter of ⌀16 mm. The part thickness is 3 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 0.3 mm. These finishes are applied on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 10 | mm |
| outer diameter | 16 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.3 | mm |
Washer / Flat Gasket STL file ⌀ID: 6 mm ⌀OD: 18 mm thickness: 5 mm + chamfers (📦 #8425)
1 object(s) - format STL
Model of gasket / washer in STL format. This part has an inner diameter of ⌀6 mm and an outer diameter of ⌀18 mm. The part thickness is 5 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 0.3 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 6 | mm |
| outer diameter | 18 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.3 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 21 mm ⌀OD: 25 mm thickness: 6 mm + chamfers (📦 #8841)
1 object(s) - format STL
3D model of washer / gasket in STL file format. This model has an internal diameter of ⌀21 mm and an external diameter of ⌀25 mm. The thickness is 6 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.5 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 21 | mm |
| outer diameter | 25 | mm |
| thickness | 6 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 65.5 mm ⌀OD: 70.5 mm thickness: 6 mm + chamfers (📦 #8953)
1 object(s) - format STL
Download this model of washer / flat gasket in STL file format. This model has an inner diameter of ⌀65.5 mm and an outer diameter of ⌀70.5 mm. The part thickness is 6 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 1 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 65.5 | mm |
| outer diameter | 70.5 | mm |
| thickness | 6 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 7 mm ⌀OD: 14 mm thickness: 3 mm + chamfers (📦 #6303)
1 object(s) - format STL
Download this 3D model of washer / gasket in STL 3D file format. This model features an internal diameter of ⌀7 mm and an external diameter of ⌀14 mm. The total thickness is 3 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 1 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 7 | mm |
| outer diameter | 14 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 12 mm ⌀OD: 16 mm thickness: 6 mm + chamfers (📦 #8162)
1 object(s) - format STL
Download this 3D model of washer / gasket in STL 3D file format. This model features an internal diameter of ⌀12 mm and an external diameter of ⌀16 mm. The part thickness is 6 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.3 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 12 | mm |
| outer diameter | 16 | mm |
| thickness | 6 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.3 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 6.2 mm ⌀OD: 15 mm thickness: 6 mm + chamfers (📦 #9034)
1 object(s) - format STL
Download this 3D model of flat gasket / washer in STL file format. This model features an inner diameter of ⌀6.2 mm and an outer diameter of ⌀15 mm. The total thickness is 6 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 0.2 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 6.2 | mm |
| outer diameter | 15 | mm |
| thickness | 6 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.2 | mm |
Washer / Flat Gasket STL file ⌀ID: 8.4 mm ⌀OD: 13.5 mm thickness: 4 mm + chamfers (📦 #6635)
1 object(s) - format STL
File of washer / flat gasket in STL file format. This part features an internal diameter of ⌀8.4 mm and an external diameter of ⌀13.5 mm. The thickness is 4 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 1 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8.4 | mm |
| outer diameter | 13.5 | mm |
| thickness | 4 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 10 mm ⌀OD: 15 mm thickness: 5 mm + chamfers (📦 #2349)
1 object(s) - format STL
File of washer / flat gasket in STL file format. This part features an inner diameter of ⌀10 mm and an outer diameter of ⌀15 mm. The total thickness is 5 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 10 | mm |
| outer diameter | 15 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1 | mm |
Washer / Flat Gasket STL file ⌀ID: 20 mm ⌀OD: 25 mm thickness: 7.5 mm + chamfers (📦 #7753)
1 object(s) - format STL
File of gasket / washer in STL file format. This model has an internal diameter of ⌀20 mm and an external diameter of ⌀25 mm. The thickness is 7.5 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.5 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 20 | mm |
| outer diameter | 25 | mm |
| thickness | 7.5 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 23 mm ⌀OD: 34 mm thickness: 2 mm + chamfers (📦 #9200)
1 object(s) - format STL
Model of washer / flat gasket in STL format. This model features an inner diameter of ⌀23 mm and an outer diameter of ⌀34 mm. The thickness is 2 mm. Chamfers are applied on the outer diameter, each with a value of 0.2 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 23 | mm |
| outer diameter | 34 | mm |
| thickness | 2 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | two sides | |
| finish value | 0.2 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 100 mm ⌀OD: 105 mm thickness: 3 mm + chamfers (📦 #8844)
1 object(s) - format STL
3D file of flat gasket / washer in STL file format. This part has an inner diameter of ⌀100 mm and an outer diameter of ⌀105 mm. The thickness is 3 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 0.3 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 100 | mm |
| outer diameter | 105 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.3 | mm |
Washer / Flat Gasket STL file ⌀ID: 25 mm ⌀OD: 30 mm thickness: 9 mm + chamfers (📦 #8583)
1 object(s) - format STL
3D file of washer / flat gasket in STL format. This part has an inner diameter of ⌀25 mm and an outer diameter of ⌀30 mm. The part thickness is 9 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 0.3 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 25 | mm |
| outer diameter | 30 | mm |
| thickness | 9 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.3 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 0.1 mm ⌀OD: 40 mm thickness: 8 mm + chamfers (📦 #1992)
1 object(s) - format STL (5.0/5) 1 vote(s)
Download this file of gasket / washer in STL file format. This model features an inner diameter of ⌀0.1 mm and an outer diameter of ⌀40 mm. The total thickness is 8 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 0.1 | mm |
| outer diameter | 40 | mm |
| thickness | 8 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 26 mm ⌀OD: 40 mm thickness: 8 mm + chamfers (📦 #1700)
1 object(s) - format STL (5.0/5) 2 vote(s)
File of gasket / washer in STL format. This part has an inner diameter of ⌀26 mm and an outer diameter of ⌀40 mm. The total thickness is 8 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1.5 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 26 | mm |
| outer diameter | 40 | mm |
| thickness | 8 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + chamfers (📦 #1698)
1 object(s) - format STL
3D model of washer / gasket in STL format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The part thickness is 4 mm. Chamfers are applied on the outer diameter, each with a value of 1.5 mm. These finishes are present on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 30 | mm |
| outer diameter | 40 | mm |
| thickness | 4 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | two sides | |
| finish value | 1.5 | mm |